GTS Ethernet Intel® FPGA Hard IP User Guide

ID 817676
Date 10/12/2024
Public
Document Table of Contents

6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance

The single instance IP design example supports both 10GE/25GE 5 Ethernet rates and demonstrates the following basic functions:
  • 10GE/25GE5 Ethernet mode with optional FEC
  • MII PCS only mode with optional FEC
  • PCS66 OTN mode with optional FEC and PCS66 FlexE mode with optional FEC variants
Table 51.  IP Parameters for MII PCS Only Mode with Optional FEC Design ExampleThe following table specifies parameter settings used to generate this design example.
Selected IP Parameter Settings Value
General Options
Client interface MII PCS Only
PMA reference frequency 156.25 MHz
System PLL frequency 322.265625 MHz
Enable Dedicated CDR Clock Output Unchecked
Base_Profile -> Port #0 IP Configuration
Ethernet Mode 10G-1
FEC Mode

IEEE 802.3 BASE-R Firecode (CL74) – optional

Table 52.  IP Parameters for PCS OTN Mode with Optional FEC Design Example
Selected IP Parameter Settings Value
General Options
Client interface PCS66 OTN
PMA reference frequency 156.25 MHz
System PLL frequency 322.265625 MHz
Enable Dedicated CDR Clock Output Unchecked
Base_Profile -> Port #0 IP Configuration
   
Ethernet Mode 10G-1
FEC Mode

IEEE 802.3 BASE-R Firecode (CL74) – optional

Table 53.  IP Parameters for PCS66 FlexE with Optional FEC Design Example
Selected IP Parameter Settings Value
General Options
Client interface PCS66 FlexE
PMA reference frequency 156.25 MHz
System PLL frequency 322.265625 MHz
Enable Dedicated CDR Clock Output Unchecked
Base_Profile -> Port #0 IP Configuration
Ethernet Mode 10G-1
FEC Mode

IEEE 802.3 BASE-R Firecode (CL74) – optional

For more information about steps on how to generate a design example, refer to the Generating the Design Example.

5 The current release of the Quartus® Prime Pro Edition software supports design example generation and simulation for D-Series and E-Series Device Group A.