GTS Ethernet Intel® FPGA Hard IP User Guide

Download PDF
ID 817676
Date 10/12/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Install and License the GTS Ethernet Intel® FPGA Hard IP 3. Configure and Generate Ethernet Hard IP variant 4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application 5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance 6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance 7. Simulate, Compile, and Validate SyncE - Single Instance 8. Simulate and Compile PTP1588 - Single Instance 9. Simulate, Compile, and Validate - Multiple Instance 10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training 11. Troubleshoot and Diagnose Issues A. Appendix A: Functional Description B. Appendix B: Configuration Registers C. Appendix C: Document Revision History for the GTS Ethernet Intel® FPGA Hard IP User Guide
1. Overview x
1.1. Release Information 1.2. High-Level Functional Overview 1.3. Acronyms 1.4. Agilex™ 5 Ethernet Portfolio and Target Applications 1.5. Agilex™ 5 Ethernet Hard IP Features 1.6. GTS Ethernet Intel® FPGA Hard IP Design Flow
1.5. Agilex™ 5 Ethernet Hard IP Features x
1.5.1. Device Family Support 1.5.2. Device Speed Grade Support 1.5.3. Resource Utilization
3. Configure and Generate Ethernet Hard IP variant x
3.1. Create Quartus Project 3.2. Configure GTS Ethernet Hard IP 3.3. Generate HDL for Synthesis and Simulation 3.4. Generated File Structure 3.5. Generate GTS EHIP Design Example 3.6. Analog Parameter Options
3.5. Generate GTS EHIP Design Example x
3.5.1. Directory Structure
4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application x
4.1. Implement Required Clocking 4.2. Implement Required Resets 4.3. Connect the Status Interface 4.4. Connect the MAC Avalon Streaming Client Interface 4.5. Connect the MII PCS Only Client Interface 4.6. Connect the PCS66 Client Interface – FlexE and OTN 4.7. Connect the Precision Time Protocol Interface 4.8. Connect the Ethernet Hard IP Reconfiguration Interface 4.9. Connect the Auto-Negotiation and Link Training
4.1. Implement Required Clocking x
4.1.1. Implement MAC Synchronous Clock Connections to Single Instance 4.1.2. Implement MAC Synchronous Clock Connections to Multiple Instances 4.1.3. Implement Clock Connections to MAC Asynchronous Operation 4.1.4. Implement Clock Connections in Synchronous Ethernet Operation (Sync-E) 4.1.5. Implement Clock Connections in PTP-Based Design
4.2. Implement Required Resets x
4.2.1. Reset Sequence 4.2.2. Connect the GTS Reset Sequencer Intel® FPGA IP
4.2.2. Connect the GTS Reset Sequencer Intel® FPGA IP x
4.2.2.1. Requirements and Considerations for GTS Reset Sequencer Intel® FPGA IP
4.3. Connect the Status Interface x
4.3.1. Use i_stats_snapshot to Read Stats Counters
4.4. Connect the MAC Avalon Streaming Client Interface x
4.4.1. Connect the TX MAC Avalon Streaming Client Interface 4.4.2. Connect the RX MAC Avalon Streaming Client Interface 4.4.3. Connect the MAC Flow Control Interface
4.4.1. Connect the TX MAC Avalon Streaming Client Interface x
4.4.1.1. Drive the Ethernet Packet to the TX MAC Avalon Streaming Client Interface with Disabled Preamble Passthrough 4.4.1.2. Drive the Ethernet Packet on the TX MAC Avalon Streaming Client Interface with Enabled Preamble Passthrough 4.4.1.3. Use i_tx_skip_crc to Control Source Address, PAD, and CRC Insertion 4.4.1.4. Assert the i_tx_error to Invalidate a Packet
4.4.2. Connect the RX MAC Avalon Streaming Client Interface x
4.4.2.1. Receive Ethernet Frame on the RX MAC Avalon Streaming Client Interface with Preamble Passthrough Disabled 4.4.2.2. Receive Ethernet Frame with Preamble Passthrough Enabled 4.4.2.3. Receive Ethernet Frame with Remove CRC bytes Disabled 4.4.2.4. Monitor Status and Errors on the RX MAC Avalon Streaming Client Interface
4.4.3. Connect the MAC Flow Control Interface x
4.4.3.1. Connect the TX MAC Flow Control Interface 4.4.3.2. Connect the RX MAC Flow Control Interface
4.5. Connect the MII PCS Only Client Interface x
4.5.1. Connect the MII PCS Mode TX Interface 4.5.2. Connect the MII PCS Mode RX Interface
4.5.1. Connect the MII PCS Mode TX Interface x
4.5.1.1. Insert Alignment Marker
4.5.2. Connect the MII PCS Mode RX Interface x
4.5.2.1. Receive Alignment Marker
4.6. Connect the PCS66 Client Interface – FlexE and OTN x
4.6.1. Connect the FlexE and OTN Mode TX Interface 4.6.2. Connect the FlexE and OTN Mode RX Interface
4.6.1. Connect the FlexE and OTN Mode TX Interface x
4.6.1.1. Insert Alignment Marker
4.6.2. Connect the FlexE and OTN Mode RX Interface x
4.6.2.1. Receive Alignment Marker
4.7. Connect the Precision Time Protocol Interface x
4.7.1. Connect the Time-of-Day Interface 4.7.2. Connect the TX Two-Step Timestamp Interface 4.7.3. Connect the TX One-Step Timestamp Interface 4.7.4. Connect the RX Timestamp Interface 4.7.5. Connect the PTP Status Interface
4.7.3. Connect the TX One-Step Timestamp Interface x
4.7.3.1. PTP Field Offset for 1-Step Operation
5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance x
5.1. Design Example Features 5.2. Design Example Components 5.3. Simulate the Design Example 5.4. Compile the Design Example 5.5. Validate the Design Example
5.3. Simulate the Design Example x
5.3.1. Simulation Testbench Flow 5.3.2. Verify the Simulation Results
5.5. Validate the Design Example x
5.5.1. Configure the Clocks in Hardware 5.5.2. Program the FPGA 5.5.3. Run the Hardware Test
6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance x
6.1. Design Example Features 6.2. Design Example Components 6.3. Simulate the Design Example 6.4. Compile the Design Example 6.5. Validate the Design Example
6.3. Simulate the Design Example x
6.3.1. Simulation Testbench Flow 6.3.2. Simulators Output
6.5. Validate the Design Example x
6.5.1. Configure the Clocks in Hardware 6.5.2. Program the FPGA 6.5.3. Run the Hardware Test
7. Simulate, Compile, and Validate SyncE - Single Instance x
7.1. Design Example Features 7.2. Design Example Components 7.3. Simulate the Design Example 7.4. Compile the Design Example 7.5. Validate the Design Example
7.3. Simulate the Design Example x
7.3.1. Simulation Testbench Flow for Single Instance with SyncE 7.3.2. Simulator Output
7.5. Validate the Design Example x
7.5.1. Configure the Clocks in Hardware 7.5.2. Program the FPGA 7.5.3. Run the Hardware Test
8. Simulate and Compile PTP1588 - Single Instance x
8.1. Design Example Features 8.2. Design Example Components 8.3. Simulate the Design Example 8.4. Compile the Design Example 8.5. Validate the Design Example
8.3. Simulate the Design Example x
8.3.1. Simulation Testbench Flow 8.3.2. Simulator Output
8.5. Validate the Design Example x
8.5.1. Configure the Clocks in Hardware 8.5.2. Program the FPGA 8.5.3. Run the Hardware Test
9. Simulate, Compile, and Validate - Multiple Instance x
9.1. Design Example Features 9.2. Design Example Components 9.3. Simulate the Design Example 9.4. Compile the Design Example 9.5. Validate the Design Example
9.3. Simulate the Design Example x
9.3.1. Simulation Testbench Flow for MAC Mode 9.3.2. Simulator Output
9.5. Validate the Design Example x
9.5.1. Configure the Clocks in Hardware 9.5.2. Program the FPGA 9.5.3. Run the Hardware Test
10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training x
10.1. Design Example Features 10.2. Design Example Components 10.3. Simulate the Design Example 10.4. Compile the Design Example 10.5. Validate the Design Example
10.3. Simulate the Design Example x
10.3.1. Simulation Testbench Flow 10.3.2. Simulation Output
10.5. Validate the Design Example x
10.5.1. Configure the Clocks in Hardware 10.5.2. Program the FPGA 10.5.3. Run the Hardware Test
11. Troubleshoot and Diagnose Issues x
11.1. Enable Diagnostic Lookback Modes 11.2. Troubleshoot the Reset Sequence 11.3. Use Signal Tap Analyzer for Troubleshooting
11.1. Enable Diagnostic Lookback Modes x
11.1.1. Internal Serial Loopback 11.1.2. Enable MAC Loopback 11.1.3. Enable PCS Loopback 11.1.4. Enable External Loopback 11.1.5. Packet Client Loopback
11.2. Troubleshoot the Reset Sequence x
11.2.1. Debug the Power Up Reset Sequence 11.2.2. Debug the TX Reset Entry Sequence 11.2.3. Debug the TX Reset Exit Sequence 11.2.4. Debug the RX Reset Entry Sequence 11.2.5. Debug the RX Reset Exit Sequence 11.2.6. Debug the Auto Recovery Reset Sequence
A. Appendix A: Functional Description x
A.1. Datapath Description A.2. GTS Ethernet Intel® FPGA Hard IP MAC A.3. PCS, OTN, and FlexE Modes A.4. Precision Time Protocol Interface A.5. Auto-Negotiation and Link Training
A.2. GTS Ethernet Intel® FPGA Hard IP MAC x
A.2.1. MAC TX Datapath A.2.2. MAC RX Datapath A.2.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) A.2.4. Link Fault Signaling A.2.5. Order of Ethernet Transmission:
A.2.1. MAC TX Datapath x
A.2.1.1. Insert TX Preamble, Start, and SFD A.2.1.2. Insert Source Address A.2.1.3. Process Length/Type Field A.2.1.4. Pad the Client Frame A.2.1.5. Insert Frame Check Sequence (CRC-32) A.2.1.6. Generate and Insert Inter-Packet Gap
A.2.2. MAC RX Datapath x
A.2.2.1. Process RX Preamble A.2.2.2. Check RX Strict SFD A.2.2.3. Check RX FCS A.2.2.4. Handle RX Malformed Packet A.2.2.5. Remove PAD Bytes and FCS Bytes from RX Frames A.2.2.6. RX Undersized Frames, Oversized Frames, and Frames with Length Errors A.2.2.7. Inter-Packet Gap
A.2.3. Congestion and Flow Control Using PAUSE or Priority Flow Control (PFC) x
A.2.3.1. Conditions Triggering XOFF Frame Transmission A.2.3.2. Conditions Triggering XON Frame Transmission A.2.3.3. Pause Control and Generation Interface A.2.3.4. Pause Control Frame Filtering
A.3. PCS, OTN, and FlexE Modes x
A.3.1. PCS Mode A.3.2. OTN Mode A.3.3. FlexE Mode
A.4. Precision Time Protocol Interface x
A.4.1. Features A.4.2. PTP User Flow A.4.3. Make PTP UI Adjustments A.4.4. Reference Time Interval A.4.5. Minimum and Maximum Reference Time (TAM) Interval for UI Measurement (Hardware)
A.4.2. PTP User Flow x
A.4.2.1. PTP TX User Flow A.4.2.2. PTP RX User Flow
A.4.3. Make PTP UI Adjustments x
A.4.3.1. Adjust TX UI A.4.3.2. Adjust RX UI
B. Appendix B: Configuration Registers x
B.1. Ethernet Avalon® Memory-Mapped Interface Address Space B.2. Packet Client Registers
1. Overview
2. Install and License the GTS Ethernet Intel® FPGA Hard IP
3. Configure and Generate Ethernet Hard IP variant
4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application
5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance
6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance
7. Simulate, Compile, and Validate SyncE - Single Instance
8. Simulate and Compile PTP1588 - Single Instance
9. Simulate, Compile, and Validate - Multiple Instance
10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training
11. Troubleshoot and Diagnose Issues
A. Appendix A: Functional Description
B. Appendix B: Configuration Registers
C. Appendix C: Document Revision History for the GTS Ethernet Intel® FPGA Hard IP User Guide

A.4.2.2. PTP RX User Flow

The following flows depict pseudo-code meant for the conceptual, illustrative purposes. For definitive software routines, refer to the design example.
Note: The RX PTP Ready signal is deasserted when TX Reset is asserted. The RX PTP Ready signal asserts once TX Reset is released without the need to perform the initialization flow, provided the RX link is not lost or RX reset is not asserted during the TX Reset interval.
  1. After power on or RX reset or reestablish a lost RX link, wait until RX PCS is fully aligned.
    Monitor the status via one of the following:
    • Output port:
      o_rx_pcs_fully_alligned = 1'b1
    • Polling via Avalon® memory-mapped interface register until it is asserted:
      For 10GE and 25G FEC variants: 
      csr_read(phy_rxpcs_status.rx_aligned) = 1’b1
  2. For FEC variants, configure RX FEC codeword position into the transceiver.
    Attention: You must skip this step for non-FEC variants.
    1. Write value of 0x0 for pulse adjustment into IP.
      csr_write (ux_q_dl_ctrl_a_l<apl>.cfg_rx_lat_bit_for_async[17:0], 0x0)
    2. Read RX FEC codeword position and FEC channel mapping for each PMA channel.
      rx_fec_cw_pos = csr_read(rsfec_cw_pos_rx[fl][14:0])
    3. Calculate pulse adjustments.
      rx_xcvr_if_pulse_adj = rx_fec_cw_pos
    4. Write the pulse adjustments into the IP:
      csr_write(ux_q_dl_ctrl_a_l<apl>.cfg_rx_lat_bit_for_async[17:0], 
             rx_xcvr_if_pulse_adj[pl*pl_fl_map])
      Note: Each bank has one actual physical channel. You must program the registers of all active bank channels.
    5. Notify soft PTP that pulse adjustments have been configured.
      csr_write(ptp_rx_user_cfg_status.rx_fec_cw_pos_cfg_done, 1'b1)
  3. Wait until RX raw offset data are ready.
    You can monitor the status via one of the following:
    • Output port:
      o_rx_ptp_offset_data_valid = 1'b1
    • Polling via CSR:
      csr_read(ptp_status.rx_ptp_offset_data_valid) = 1’b1
  4. Read RX raw offset data from IP:
    • All variants:
      rx_const_delay = csr_read(ptp_rx_lane_calc_data_constdelay[30:0])
rx_const_delay_sign = csr_read(ptp_rx_lane_calc_data_constdelay[31])

rx_apulse_offset = csr_read(ptp_rx_lane_calc_data_offset[30:0])
rx_apulse_offset_sign = csr_read(ptp_rx_lane_calc_data_offset[31])
rx_apulse_wdelay] = csr_read(ptp_rx_lane_calc_data_wiredelay[19:0])
    • 10GE/25GE no FEC variants:
      rx_bitslip_cnt       = csr_read(bitslip_cnt.bitslip_cnt[6:0])
rx_dlpulse_alignment = csr_read(bitslip_cnt.dlpulse_alignment)
  5. Determine synchronous pulse AM offsets with reference to asynchronous pulse.
    • FEC variants: 
      rx_spulse_offset = rx_xcvr_if_pulse_adj[4:0] * UI 
rx_spulse_offset_sign = 1'b0;
  6. Calculate RX offsets:
    1. Calculate RX TAM adjust:
      FEC variants: 
      rx_tam_adjust = 
   (rx_const_delay_sign ? –rx_const_delay : rx_const_delay) 
 + (rx_apulse_offset_sign ? 
     –rx_apulse_offset : rx_apulse_offset
 – (rx_apulse_wdelay)
 + (rx_spulse_offset_sign ? 
     -rx_spulse_offset[rx_ref_fl] : rx_spulse_offset[rx_ref_fl])
      For all other cases: 
      rx_tam_adjust = rx_tam_adjust_sim

      Convert TAM adjust to a 32-bit 2's complement number:

      rx_tam_adjust_2c = rx_tam_adjust
where rx_tam_adjust is a 32-bit 2's complement number
    2. Calculate RX extra latency:
      Convert unit of RX PMA delay from UI to nanoseconds: 
      rx_pma_delay_ns = rx_pma_delay_ui * UI12
      RX extra latency is a negative adjustment. To indicate the negative adjustment, set the most-significant register bit to 1. Total up all extra latency together: 
      rx_extra_latency[30:0] = rx_pma_delay_ns + rx_external_phy_delay
      rx_extra_latency[31] = 1'b1
  7. Write the calculated RX offsets to IP:
    1. Write RX extra latency:
      csr_write(rx_ptp_extra_latency, rx_extra_latency)
    2. Write RX TAM adjust:
      csr_write(ptp_rx_tam_adjust, rx_tam_adjust_2c)
  8. Notify soft PTP that uses flow configuration is completed. 
    csr_write(ptp_rx_user_cfg_status.rx_user_cfg_done, 1'b1)
  9. Continue UI value measurement. Follow steps 1 through 7 mentioned in the RX UI Adjustment section.

    For simulation or hardware run with 0 PPM setup, you can skip the measurement and program 0 PPM UI value defined in UI Adjustment.

  10. Wait until RX PTP is ready.
    You can monitor the status via one of the following:
    • Output port:
      o_rx_ptp_ready = 1'b1
    • Polling via CSR:
      csr_read(ptp_status.rx_ptp_ready) = 1’b1
  11. RX PTP is up and running.

    Adjust RX UI value.

    Perform the RX UI adjustment occasionally to prevent time counter drift from golden time-of-day in the system. Follow steps 1 through 8 described in RX UI Adjustment.

    Note: UI measurement is a long process in simulation. Therefore, for simulation, Intel recommends skipping this step and program a 0 PPM value. For more details, refer to UI Value and PMA Delay.
12 The UI format differs from the format of other variables. UI uses the {4-bit ns, 28-bit fractional ns} format. Other variables defined in this flow use the {N-bit ns, 16-bit fractional ns} format, where N is the largest number to store the calculation's max value. If you use UI format in your calculation, you must convert your result to a 16-bit fractional ns format.
Level Two Title