Visible to Intel only — GUID: emt1697538011272
Ixiasoft
1. Overview
2. Install and License the GTS Ethernet Intel® FPGA Hard IP
3. Configure and Generate Ethernet Hard IP variant
4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application
5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance
6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance
7. Simulate, Compile, and Validate SyncE - Single Instance
8. Simulate and Compile PTP1588 - Single Instance
9. Simulate, Compile, and Validate - Multiple Instance
10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training
11. Troubleshoot and Diagnose Issues
A. Appendix A: Functional Description
B. Appendix B: Configuration Registers
C. Appendix C: Document Revision History for the GTS Ethernet Intel® FPGA Hard IP User Guide
4.1. Implement Required Clocking
4.2. Implement Required Resets
4.3. Connect the Status Interface
4.4. Connect the MAC Avalon Streaming Client Interface
4.5. Connect the MII PCS Only Client Interface
4.6. Connect the PCS66 Client Interface – FlexE and OTN
4.7. Connect the Precision Time Protocol Interface
4.8. Connect the Ethernet Hard IP Reconfiguration Interface
4.9. Connect the Auto-Negotiation and Link Training
4.1.1. Implement MAC Synchronous Clock Connections to Single Instance
4.1.2. Implement MAC Synchronous Clock Connections to Multiple Instances
4.1.3. Implement Clock Connections to MAC Asynchronous Operation
4.1.4. Implement Clock Connections in Synchronous Ethernet Operation (Sync-E)
4.1.5. Implement Clock Connections in PTP-Based Design
4.4.1.1. Drive the Ethernet Packet to the TX MAC Avalon Streaming Client Interface with Disabled Preamble Passthrough
4.4.1.2. Drive the Ethernet Packet on the TX MAC Avalon Streaming Client Interface with Enabled Preamble Passthrough
4.4.1.3. Use i_tx_skip_crc to Control Source Address, PAD, and CRC Insertion
4.4.1.4. Assert the i_tx_error to Invalidate a Packet
4.4.2.1. Receive Ethernet Frame on the RX MAC Avalon Streaming Client Interface with Preamble Passthrough Disabled
4.4.2.2. Receive Ethernet Frame with Preamble Passthrough Enabled
4.4.2.3. Receive Ethernet Frame with Remove CRC bytes Disabled
4.4.2.4. Monitor Status and Errors on the RX MAC Avalon Streaming Client Interface
Visible to Intel only — GUID: emt1697538011272
Ixiasoft
1.5.1. Device Family Support
The following terms define device support levels for Intel® FPGA IP cores:
Device Support Level | Definition |
---|---|
Advance | The IP core is available for simulation and compilation for this device family. Timing models include initial engineering estimates of delays based on early post-layout information. The timing models are subject to change as silicon testing improves the correlation between the actual silicon and the timing models. You can use this IP core for system architecture and resource utilization studies, simulation, pinout, system latency assessments, basic timing assessments (pipeline budgeting), and I/O transfer strategy (datapath width, burst depth, I/O standards trade-offs). |
Preliminary | The IP core is verified with preliminary timing models for this device family. The IP core meets all functional requirements but might still be undergoing timing analysis for the device family. It can be used in production designs with caution. |
Final | The IP core is verified with final timing models for this device family. The IP core meets all functional and timing requirements for the device family and can be used in production designs. |
Device Family | Support |
---|---|
Agilex™ 5 E-Series (Device Group B) | Preliminary |
Agilex™ 5 E-Series (Device Group A) | Advance |
Agilex™ 5 D-Series (Device Group A) | Advance |
Note: Device support for Agilex™ 5 D-Series FPGAs and SoCs in the Quartus® Prime Pro Edition software version 24.2 is restricted. To enable D-Series device support in your instance of the Quartus® Prime Pro Edition software, contact your regional Altera sales representative.