Visible to Intel only — GUID: onf1662081077526
Ixiasoft
HSIO Single-Ended I/O Standards Specifications
HSIO Single-Ended SSTL, HSTL, HSUL, and POD I/O Reference Voltage Specifications
HSIO Single-Ended SSTL, HSTL, HSUL, and POD I/O Standards Signal Specifications
HSIO Single-Ended LVSTL I/O Standards Specifications
HSIO Differential SSTL, HSTL, and HSUL I/O Standards Specifications
HSIO Differential POD I/O Standards Specifications
HSIO Differential LVSTL I/O Standards Specifications
HSIO Differential I/O Standards Specifications
MIPI D-PHY I/O Standards Specifications
HPS Clock Performance
HPS Internal Oscillator Frequency
HPS PLL Specifications
HPS Cold Reset
HPS SPI Timing Characteristics
HPS SD/eMMC Timing Characteristics
HPS USB 2.0 Timing Characteristics
HPS USB 3.1 Timing Characteristics
HPS Ethernet Media Access Controller (EMAC) Timing Characteristics
HPS I2C Timing Characteristics
HPS I3C Timing Characteristics
HPS NAND Timing Characteristics
HPS Trace Timing Characteristics
HPS GPIO Interface
HPS JTAG Timing Characteristics
HPS Programmable I/O Timing Characteristics
Visible to Intel only — GUID: onf1662081077526
Ixiasoft
Agilex™ 5 FPGAs and SoCs Device Data Sheet
This data sheet describes the electrical characteristics, switching characteristics, configuration specifications, and timing.
Until the data sheet status for a device reaches Final, the specifications are subject to change at any time and at Intel's discretion.
Devices | Status | ||
---|---|---|---|
All devices | Preliminary |
The following descriptors designate the status level currently applicable to the relevant variant:
- Advance: These are target specifications based on simulation.
- Preliminary: These specifications are based on simulation, early validation, and/or early characterization data.
- Final: These are production specifications based on silicon validation and/or characterization.
Series | Device Group | Temperature Grade | Speed Grade and Power Option Supported |
---|---|---|---|
D | A | Extended / Industrial | –1V (fastest) |
–2V | |||
–3V | |||
E | A | Extended / Industrial | –1V (fastest) |
–2V | |||
–2E | |||
–3V | |||
B | Extended / Industrial | –4S (fastest) | |
–5S | |||
–6S | |||
–6X |
The suffix after the speed grade denotes the power options offered.
- V—standard power (VID)
- E—low power (VID)
- S—standard power (fixed voltage)
- X—low power (fixed voltage)