Visible to Intel only — GUID: wnd1697543033711
Ixiasoft
1. Overview
2. Install and License the GTS Ethernet Intel® FPGA Hard IP
3. Configure and Generate Ethernet Hard IP variant
4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application
5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance
6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance
7. Simulate, Compile, and Validate SyncE - Single Instance
8. Simulate and Compile PTP1588 - Single Instance
9. Simulate, Compile, and Validate - Multiple Instance
10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training
11. Troubleshoot and Diagnose Issues
A. Appendix A: Functional Description
B. Appendix B: Configuration Registers
C. Appendix C: Document Revision History for the GTS Ethernet Intel® FPGA Hard IP User Guide
4.1. Implement Required Clocking
4.2. Implement Required Resets
4.3. Connect the Status Interface
4.4. Connect the MAC Avalon Streaming Client Interface
4.5. Connect the MII PCS Only Client Interface
4.6. Connect the PCS66 Client Interface – FlexE and OTN
4.7. Connect the Precision Time Protocol Interface
4.8. Connect the Ethernet Hard IP Reconfiguration Interface
4.9. Connect the Auto-Negotiation and Link Training
4.1.1. Implement MAC Synchronous Clock Connections to Single Instance
4.1.2. Implement MAC Synchronous Clock Connections to Multiple Instances
4.1.3. Implement Clock Connections to MAC Asynchronous Operation
4.1.4. Implement Clock Connections in Synchronous Ethernet Operation (Sync-E)
4.1.5. Implement Clock Connections in PTP-Based Design
4.4.1.1. Drive the Ethernet Packet to the TX MAC Avalon Streaming Client Interface with Disabled Preamble Passthrough
4.4.1.2. Drive the Ethernet Packet on the TX MAC Avalon Streaming Client Interface with Enabled Preamble Passthrough
4.4.1.3. Use i_tx_skip_crc to Control Source Address, PAD, and CRC Insertion
4.4.1.4. Assert the i_tx_error to Invalidate a Packet
4.4.2.1. Receive Ethernet Frame on the RX MAC Avalon Streaming Client Interface with Preamble Passthrough Disabled
4.4.2.2. Receive Ethernet Frame with Preamble Passthrough Enabled
4.4.2.3. Receive Ethernet Frame with Remove CRC bytes Disabled
4.4.2.4. Monitor Status and Errors on the RX MAC Avalon Streaming Client Interface
Visible to Intel only — GUID: wnd1697543033711
Ixiasoft
4.1.3. Implement Clock Connections to MAC Asynchronous Operation
In an asynchronous operation, when you select Enable asynchronous adapter clocks parameter in the IP GUI, i_clk_rx and i_clk_tx can be asynchronous from each other and from o_clk_pll. No additional async FIFO or special data valid sequence is required in soft logic to use this mode.
Figure 16. Clock Connections in MAC Asynchronous Operation
The following table summarizes minimum frequencies required for the i_clk_tx and i_clk_rx during the Asynchronous mode:
Rate | i_clk_tx | i_clk_rx |
---|---|---|
10GE | 156.25 to 161.1328125 MHz | o_clk_rec_div or 156.25 MHz to 161.1328125 MHz +200 ppm |
25GE | 390.625 to 402.83203125 MHz | o_clk_rec_div or 390.625 to 402.83203125 MHz +200ppm |