Visible to Intel only — GUID: arq1717485274940
Ixiasoft
1. Overview
2. Install and License the GTS Ethernet Intel® FPGA Hard IP
3. Configure and Generate Ethernet Hard IP variant
4. Integrate GTS Ethernet Intel® FPGA Hard IP into Your Application
5. Simulate, Compile, and Validate (MAC+PCS) - Single Instance
6. Simulate, Compile, and Validate (MII PCS Only /PCS66 OTN/PCS66 FlexE) - Single Instance
7. Simulate, Compile, and Validate SyncE - Single Instance
8. Simulate and Compile PTP1588 - Single Instance
9. Simulate, Compile, and Validate - Multiple Instance
10. Simulate, Compile, and Validate - Auto-Negotiation and Link Training
11. Troubleshoot and Diagnose Issues
A. Appendix A: Functional Description
B. Appendix B: Configuration Registers
C. Appendix C: Document Revision History for the GTS Ethernet Intel® FPGA Hard IP User Guide
4.1. Implement Required Clocking
4.2. Implement Required Resets
4.3. Connect the Status Interface
4.4. Connect the MAC Avalon Streaming Client Interface
4.5. Connect the MII PCS Only Client Interface
4.6. Connect the PCS66 Client Interface – FlexE and OTN
4.7. Connect the Precision Time Protocol Interface
4.8. Connect the Ethernet Hard IP Reconfiguration Interface
4.9. Connect the Auto-Negotiation and Link Training
4.1.1. Implement MAC Synchronous Clock Connections to Single Instance
4.1.2. Implement MAC Synchronous Clock Connections to Multiple Instances
4.1.3. Implement Clock Connections to MAC Asynchronous Operation
4.1.4. Implement Clock Connections in Synchronous Ethernet Operation (Sync-E)
4.1.5. Implement Clock Connections in PTP-Based Design
4.4.1.1. Drive the Ethernet Packet to the TX MAC Avalon Streaming Client Interface with Disabled Preamble Passthrough
4.4.1.2. Drive the Ethernet Packet on the TX MAC Avalon Streaming Client Interface with Enabled Preamble Passthrough
4.4.1.3. Use i_tx_skip_crc to Control Source Address, PAD, and CRC Insertion
4.4.1.4. Assert the i_tx_error to Invalidate a Packet
4.4.2.1. Receive Ethernet Frame on the RX MAC Avalon Streaming Client Interface with Preamble Passthrough Disabled
4.4.2.2. Receive Ethernet Frame with Preamble Passthrough Enabled
4.4.2.3. Receive Ethernet Frame with Remove CRC bytes Disabled
4.4.2.4. Monitor Status and Errors on the RX MAC Avalon Streaming Client Interface
Visible to Intel only — GUID: arq1717485274940
Ixiasoft
7.5.1. Configure the Clocks in Hardware
Follow these steps to program the hardware design example on the Agilex™ 5 device:
- Connect the Agilex™ 5 Premium Development Kit to the host computer.
- Launch the Clock Controller application, which is part of the development kit and, set the frequencies for the design example as following:
- Configure the Si5332 OUT0 to 156.25MHz.
- Configure the Si5332 OUT2 to 100MHz.
Figure 62. Clock ControllerNote: Refer to the Intel Agilex™ 5 Premium Development Kit Clock Controller GUI for instructions on using the clock controller application.
Related Information