Visible to Intel only — GUID: moi1657772069519
Ixiasoft
GPIO-B Single-Ended I/O Standards Specifications
GPIO-B Single-Ended SSTL, HSTL, HSUL, POD and LVSTL I/O Reference Voltage Specifications
GPIO-B Single-Ended SSTL, HSTL, HSUL, and POD I/O Standards Signal Specifications
GPIO-B Single-Ended LVSTL I/O Standards Specifications
GPIO-B Differential SSTL, HSTL, and HSUL I/O Standards Specifications
GPIO-B Differential POD I/O Standards Specifications
GPIO-B Differential LVSTL I/O Standards Specifications
GPIO-B Differential I/O Standards Specifications
LVDS SERDES Specifications
DPA Lock Time Specifications
LVDS SERDES Soft-CDR Sinusoidal Jitter Tolerance Specifications
Memory Standards Supported
Memory Output Clock Jitter Specifications
Performance Specifications of the HBM2E Interface
Performance Specifications of Network on Chip (NoC)
NOC Reference Clock Requirements
HPS Clock Performance
HPS Internal Oscillator Frequency
HPS PLL Specifications
HPS Cold Reset
HPS SPI Timing Characteristics
HPS SD/MMC Timing Characteristics
HPS USB UPLI Timing Characteristics
HPS Ethernet Media Access Controller (EMAC) Timing Characteristics
HPS I2C Timing Characteristics
HPS NAND Timing Characteristics
HPS Trace Timing Characteristics
HPS GPIO Interface
HPS JTAG Timing Characteristics
HPS Programmable I/O Timing Characteristics
Visible to Intel only — GUID: moi1657772069519
Ixiasoft
Agilex™ 7 FPGAs and SoCs Device Data Sheet: M-Series
This data sheet describes the electrical characteristics, switching characteristics, configuration specifications, and timing.
Until the data sheet status for a device reaches Final, the specifications are subject to change at any time and at Intel's discretion.
Device | Tile | Package | Status |
---|---|---|---|
AGM 032/039 | F-Tile and R-Tile | R47A | Preliminary |
AGM 032/039 | F-Tile | R31B | Advance |
AGM 032/039 | F-Tile | R47B | Advance |
The following descriptors designate the status level currently applicable to the relevant variant:
- Advance: These are target specifications based on simulation.
- Preliminary: These specifications are based on simulation, early validation, and/or early characterization data.
- Final: These are production specifications based on silicon validation and/or characterization.
Device Grade | Speed Grade and Power Option Supported |
---|---|
Extended | –E1V (fastest) |
–E2V | |
–E3V | |
–E3E |
The suffix after the speed grade denotes the power options offered.
- V—standard power (VID)
- E—lower power (VID)