Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide

Download PDF
ID 814550
Date 5/24/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. Development Kit Setup 4. Board Test System 5. Development Kit Hardware and Configuration 6. Custom Projects for the Development Kit 7. Document Revision History for the Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide A. Development Kit Components B. Additional Information
1. Overview x
1.1. Block Diagram 1.2. Feature Summary 1.3. Box Contents 1.4. Recommended Operating Conditions
2. Getting Started x
2.1. Quartus® Prime Software and Driver Installation 2.2. Quick Start Guide 2.3. Design Examples
3. Development Kit Setup x
3.1. Default Settings 3.2. Powering Up the Development Kit 3.3. Performing Board Restore
3.3. Performing Board Restore x
3.3.1. Restoring Board QSPI Flash U10 with Default Factory Image 3.3.2. Restoring Board QSPI Flash U4 with the Default Factory Image
4. Board Test System x
4.1. Setting Up BTS GUI Running Environment 4.2. Troubleshooting for Launching BTS 4.3. BTS Functionalities
4.1. Setting Up BTS GUI Running Environment x
4.1.1. Downloading OpenJDK 4.1.2. Downloading OpenJFX 4.1.3. Installing OpenJDK and OpenJFX 4.1.4. Installing Quartus® Prime Software 4.1.5. Running the BTS GUI
4.3. BTS Functionalities x
4.3.1. Diagnostic GUI 4.3.2. Clock Controller GUI 4.3.3. Power Monitor GUI 4.3.4. MAX® 10 Controller GUI 4.3.5. Agilex™ 5 FPGA E-Series Test Functionality 4.3.6. Information Display
4.3.2. Clock Controller GUI x
4.3.2.1. Si5332 Clock 4.3.2.2. Si5518 Clock
4.3.3. Power Monitor GUI x
4.3.3.1. Power Monitor 4.3.3.2. Temperature Monitor
4.3.4. MAX® 10 Controller GUI x
4.3.4.1. Remote I/O Control 4.3.4.2. Expansion Board Control 4.3.4.3. System Control
4.3.4.1. Remote I/O Control x
4.3.4.1.1. Remote Control 4.3.4.1.2. MISC LED Control
4.3.4.1.1. Remote Control x
4.3.4.1.1.1. Push Button 4.3.4.1.1.2. User Switch 4.3.4.1.1.3. MSEL 4.3.4.1.1.4. Si569-1V8
4.3.5. Agilex™ 5 FPGA E-Series Test Functionality x
4.3.5.1. DDR4 Test 4.3.5.2. HPS DDR4 Test 4.3.5.3. LPDDR4 Test 4.3.5.4. QSFP Test 4.3.5.5. SFP+ Test 4.3.5.6. FMC+ Test 4.3.5.7. SMA Test
4.3.6. Information Display x
4.3.6.1. Sys Info 4.3.6.2. Connection 4.3.6.3. The Bottom Status Bar
5. Development Kit Hardware and Configuration x
5.1. Configuring the FPGA and Accessing HPS Debug Access Port by JTAG 5.2. Configuring the FPGA Device by Active Serial (AS) Modes (Default Mode) 5.3. Configuring the FPGA Device by Avalon® Streaming Modes 5.4. Expansion Boards
5.4. Expansion Boards x
5.4.1. HPS Expansion Board (HPS-EB) 5.4.2. HPS NAND Board (HPS-NB) 5.4.3. HPS Test Board (HPS-TB)
6. Custom Projects for the Development Kit x
6.1. Golden Top
A. Development Kit Components x
A.1. Board Overview A.2. System Management A.3. Power A.4. Clocks A.5. General Input/Output A.6. Input and Output Components A.7. Memory Interfaces A.8. Communication Interfaces A.9. Expansion Boards A.10. Connectors and Headers
A.2. System Management x
A.2.1. JTAG Master Sources
A.6. Input and Output Components x
A.6.1. Push Buttons A.6.2. Switches A.6.3. LEDs
A.8. Communication Interfaces x
A.8.1. QSFP+ A.8.2. SFP+ A.8.3. Ethernet A.8.4. FMC A.8.5. MIPI A.8.6. USB3.1 A.8.7. HPS IO48 Interface A.8.8. Serial Buses
B. Additional Information x
B.1. Safety and Regulatory Information B.2. Compliance Information
B.1. Safety and Regulatory Information x
B.1.1. Safety Warnings B.1.2. Safety Cautions
1. Overview
2. Getting Started
3. Development Kit Setup
4. Board Test System
5. Development Kit Hardware and Configuration
6. Custom Projects for the Development Kit
7. Document Revision History for the Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide
A. Development Kit Components
B. Additional Information

4.3.2.1. Si5332 Clock

Figure 14. The Si5332 Setting Page
  • Default: Restores to factory default settings.
  • Read: Reads the current real-time frequency setting for the oscillator associated with the active tab.
  • Set: Sets the programmable oscillator frequency for the selected clock to the value in the OUTx output controls. Frequency changes might take several milliseconds to take effect. You might see glitches on the clock during this time. Altera recommends resetting the FPGA logic after changing frequencies.
  • Import: Imports the register list generated from the tool of the Skyworks* Clockbuilder Pro software. Register changes are volatile after power cycling.
    Figure 15. The Sample of Si5332 Register List For Importing
You can save the imported clock settings to flash if you want the board to load the user settings on power-up next time. To do so, follow these steps:
  1. To import user settings, click the Import button.
  2. Wait for the successful completion of importing, and press SW15 for 5 seconds. The board saves all the clock settings to flash. The LED D11 blinks once to notify you that it is in saving state. The saving only takes effect tat the next power cycling.
  3. If you want to restore the factory default clock settings, press SW14 for 5 seconds. The LED D11 blinks 5 times to notify you of its recovering state.
Related Information
Level Two Title