Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide

Download PDF
ID 814550
Date 8/05/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. Development Kit Setup 4. Board Test System 5. Development Kit Hardware and Configuration 6. Custom Projects for the Development Kit 7. Document Revision History for the Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide A. Development Kit Components B. Additional Information
1. Overview x
1.1. Block Diagram 1.2. Feature Summary 1.3. Box Contents 1.4. Recommended Operating Conditions
2. Getting Started x
2.1. Quartus® Prime Software and Driver Installation 2.2. Quick Start Guide 2.3. Design Examples
3. Development Kit Setup x
3.1. Installing the HPS Expansion Board (HPS-EB) 3.2. Default Settings 3.3. Powering Up the Development Kit 3.4. Performing Board Restore
3.4. Performing Board Restore x
3.4.1. Restoring Board QSPI Flash U10 with Default Factory Image 3.4.2. Restoring Board QSPI Flash U4 with Default Factory Image 3.4.3. Restoring SD Card with the Default Factory Image
4. Board Test System x
4.1. Setting Up BTS GUI Running Environment 4.2. Troubleshooting for Launching BTS 4.3. BTS Functionalities
4.1. Setting Up BTS GUI Running Environment x
4.1.1. Installing Quartus® Prime Software 4.1.2. Setting Up the Programmer 4.1.3. Running the BTS GUI on Windows 4.1.4. Running the BTS GUI on Linux
4.1.4. Running the BTS GUI on Linux x
4.1.4.1. Configuring the Linux UART Environment 4.1.4.2. Launching the BTS
4.3. BTS Functionalities x
4.3.1. Diagnostic GUI 4.3.2. Clock Controller GUI 4.3.3. Power Monitor GUI 4.3.4. MAX® 10 Controller GUI 4.3.5. Agilex™ 5 FPGA Functionality 4.3.6. Information Display 4.3.7. Migrating Development Kit Installer Package from v24.1 to v24.2
4.3.2. Clock Controller GUI x
4.3.2.1. Si5332 Clock 4.3.2.2. Si5518 Clock
4.3.3. Power Monitor GUI x
4.3.3.1. Power Monitor 4.3.3.2. Temperature Monitor
4.3.4. MAX® 10 Controller GUI x
4.3.4.1. Remote I/O Control 4.3.4.2. Expansion Board Control 4.3.4.3. System Control
4.3.4.1. Remote I/O Control x
4.3.4.1.1. Remote Control 4.3.4.1.2. MISC LED Control
4.3.4.1.1. Remote Control x
4.3.4.1.1.1. Push Button 4.3.4.1.1.2. User Switch 4.3.4.1.1.3. MSEL 4.3.4.1.1.4. Si569-1V8
4.3.5. Agilex™ 5 FPGA Functionality x
4.3.5.1. The GPIO Tab 4.3.5.2. The Memory Tab 4.3.5.3. The Transceiver Tab
4.3.5.2. The Memory Tab x
4.3.5.2.1. The DDR4 COMP Tab 4.3.5.2.2. The HPS DDR4 COMP Tab 4.3.5.2.3. The LPDDR4 COMP Tab
4.3.5.3. The Transceiver Tab x
4.3.5.3.1. QSFP Test 4.3.5.3.2. SFP+ Test 4.3.5.3.3. FMC+ Test 4.3.5.3.4. SMA Test
4.3.6. Information Display x
4.3.6.1. Sys Info 4.3.6.2. Connection 4.3.6.3. The Bottom Status Bar
5. Development Kit Hardware and Configuration x
5.1. Configuring the FPGA and Accessing HPS Debug Access Port by JTAG 5.2. Configuring the FPGA Device by Active Serial (AS) Modes (Default Mode) 5.3. Configuring the FPGA Device by Avalon® Streaming Modes 5.4. Expansion Boards
5.4. Expansion Boards x
5.4.1. HPS Expansion Board (HPS-EB) 5.4.2. HPS NAND Board (HPS-NB) 5.4.3. HPS Test Board (HPS-TB)
5.4.1. HPS Expansion Board (HPS-EB) x
5.4.1.1. Booting from SD Card using HPS Enablement DC
6. Custom Projects for the Development Kit x
6.1. Golden Top 6.2. EMIF Pin Swizzling Setting
A. Development Kit Components x
A.1. Board Overview A.2. System Management A.3. Power A.4. Clocks A.5. General Input/Output A.6. Input and Output Components A.7. Memory Interfaces A.8. Communication Interfaces A.9. Expansion Boards A.10. Connectors and Headers
A.2. System Management x
A.2.1. JTAG Master Sources
A.6. Input and Output Components x
A.6.1. Push Buttons A.6.2. Switches A.6.3. LEDs
A.8. Communication Interfaces x
A.8.1. QSFP+ A.8.2. SFP+ A.8.3. Ethernet A.8.4. FMC A.8.5. MIPI A.8.6. USB3.1 A.8.7. HPS IO48 Interface A.8.8. Serial Buses
A.9. Expansion Boards x
A.9.1. HPS Expansion Board (HPS-EB) A.9.2. HPS NAND Board (HPS-NB) A.9.3. HPS Test Board (HPS-TB)
B. Additional Information x
B.1. Safety and Regulatory Information B.2. Compliance Information
B.1. Safety and Regulatory Information x
B.1.1. Safety Warnings B.1.2. Safety Cautions
1. Overview
2. Getting Started
3. Development Kit Setup
4. Board Test System
5. Development Kit Hardware and Configuration
6. Custom Projects for the Development Kit
7. Document Revision History for the Agilex™ 5 FPGA E-Series 065B Premium Development Kit User Guide
A. Development Kit Components
B. Additional Information

A.6.3. LEDs

The Agilex™ 5 FPGA E-Series 065B Premium Development Kit provides various LEDs for indicating board status information.
Table 13.  LEDs
Board Reference Schematic Signal Name Description
D2 MAX10 CONF DONE Green when the MAX® 10 configuration is done.
D3 FPGA CONF DONE Green when the FPGA configuration is done.
D11 POWER

Green when all powers are good.

  • Blink 1 time confirms the save operation is successful.
  • Blink 5 times confirms the factory reset is successful.
D12 OVERTEMP Red when in an over temperature condition.
D13 USER IMAGE Green when user image is selected.
D14 HPS JTAG Green when HPS JTAG is enabled.
D15 REMOTE ACCESS Green when remote access is enabled.
D16 USER_SW1 User LED1 (Green).
D17 USER_SW2 User LED2 (Green).
D18 USER_SW3 User LED3 (Green).
D19 USER_SW4 User LED4 (Green).
D20 ASx4 FAST Green when Active Serial (AS) x4 fast is selected.
D21 ASx4 NORM Green when AS x4 normal is selected.
D22 AVSTx8 Green when Avalon® streaming interface x8 is selected.
D23 JTAG Green when JTAG is selected.
D28 RS232A ACT Green when RS232A is active/linked.
D29 RS232B ACT Green when RS232B is active/linked.
D30 QSFP1 LINK/ACT Green when QSFP1 is active/linked.
D31 QSFP2 LINK/ACT Green when QSFP2 is active/linked.
D32 SFP1 LINK/ACT Green when SFP1 is active/linked.
D33 SFP2 LINK/ACT Green when SFP2 is active/linked.
D55 FMC JTAG Green when FMC JTAG is enabled.
Level Two Title