MAX 10 FPGA Development Kit User Guide

Download PDF
ID 683460
Date 9/07/2017
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. Board Test System 4. Board Components A. Additional Information
1. Overview x
1.1. General Description 1.2. Handling the Board
2. Getting Started x
2.1. Quartus II Web Edition Software 2.2. Installing the Development Kit 2.3. Installing the USB-Blaster Driver 2.4. Board Update Portal
3. Board Test System x
3.1. Using the Configure Menu 3.2. The System Info Tab 3.3. The GPIO Tab 3.4. The Flash Tab 3.5. The HSMC Tab 3.6. The DDR3 Tab 3.7. The ADC Tab 3.8. The HDMI Tab 3.9. The Sleep Mode Tab 3.10. The Power Monitor 3.11. The Clock Control
4. Board Components x
4.1. Board Overview 4.2. Featured Device 4.3. Configuration 4.4. Status Elements 4.5. Setup Elements 4.6. General User Input/Output 4.7. Clock Circuitry 4.8. Components and Interfaces 4.9. Memory 4.10. Power Distribution System
4.3. Configuration x
4.3.1. Using the Quartus II Programmer 4.3.2. Selecting the Internal Configuration Scheme 4.3.3. Switch and Jumper Settings
4.7. Clock Circuitry x
4.7.1. On-Board Oscillators 4.7.2. Off-Board Clock Input/Output
4.8. Components and Interfaces x
4.8.1. 10/100/1000 Ethernet PHY 4.8.2. Digital-to-Analog Converter 4.8.3. HDMI Video Output 4.8.4. HSMC 4.8.5. Pmod Connectors 4.8.6. USB to UART
4.9. Memory x
4.9.1. DDR3 Rev. B Board 4.9.2. DDR3 Rev. C Board 4.9.3. Flash
A. Additional Information x
A.1. User Guide Revision History A.2. Compliance and Conformity Statements
A.2. Compliance and Conformity Statements x
A.2.1. CE EMI Conformity Caution
1. Overview
2. Getting Started
3. Board Test System
4. Board Components
A. Additional Information

4.3.1. Using the Quartus II Programmer

You can use the Quartus II Programmer to configure the FPGA with a .sof.
Before configuring the FPGA:
  • Ensure that the Quartus II Programmer and the USB-Blaster driver are installed on the host computer
  • The USB cable is connected to the kit
  • Power to the board is on, and no other applications that use the JTAG chain are running

To configure the MAX 10 FPGA:

  1. Start the Quartus II Programmer.
  2. Click Add File and select the path to the desired .sof.
  3. Turn on the Program/Configure option for the added file.
  4. Click Start to download the selected file to the FPGA. Configuration is complete when the progress bar reaches 100%.
The Quartus II Convert Programming File (CPF) GUI can be used to generate a .sof file that can use for internal configuration. You can directly program the MAX 10 device’s flash which included Configuration Flash Memory (CFM) and User Flash Memory (UFM) by using a download cable with the Quartus II software programmer.
Level Two Title