PCB High-Speed Signal Design Guidelines: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 821801
Date 11/18/2024
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Overview of Agilex™ 5 Package 3. VPBGA PCB Layout Guideline 4. MBGA PCB Routing Guidelines 5. EMIF PCB Routing Guidelines (VPBGA and MBGA) 6. MIPI Interface Layout Design Guidelines (VPBGA and MBGA) 7. True Differential I/O Interface PCB Routing Guidelines (VPBGA and MBGA) 8. Power Distribution Network Design Guidelines 9. Document Revision History for the PCB High-Speed Signal Design Guidelines: Agilex™ 5 FPGAs and SoCs
2. Overview of Agilex™ 5 Package x
2.1. BGA Footprint and Land Pattern
3. VPBGA PCB Layout Guideline x
3.1. Overview of VPBGA 3.2. VPBGA HSSI Reference PCB Stack-up 3.3. General Design Considerations 3.4. Agilex™ 5 GTS Transceiver 3.5. GTS Transceiver PCIe* Gen4 16 GT/s NRZ Interface Design Guidelines 3.6. GTS Transceiver Ethernet 25 Gbps NRZ Interface Design Guidelines 3.7. Other Connectors
3.3. General Design Considerations x
3.3.1. Impedance Tolerances 3.3.2. Reference Planes 3.3.3. Layer Assignment 3.3.4. Via Drill Size 3.3.5. Fiber Weave 3.3.6. PCB Traces 3.3.7. PCB Vias 3.3.8. AC Coupling Capacitors 3.3.9. Others
3.4. Agilex™ 5 GTS Transceiver x
3.4.1. HSSI Pin-Field Breakout for VPBGA
3.5. GTS Transceiver PCIe* Gen4 16 GT/s NRZ Interface Design Guidelines x
3.5.1. GTS Transceiver Channel Recommendations 3.5.2. General Guidelines for GTS Transceiver PCIe* Gen4 Interface 3.5.3. PCIe* Add-in Card Edge Finger
3.6. GTS Transceiver Ethernet 25 Gbps NRZ Interface Design Guidelines x
3.6.1. GTS Transceiver Channel Recommendations 3.6.2. General Guidelines for GTS Transceiver Ethernet Interface 3.6.3. QSFP Connector Routing 3.6.4. SFP Connector Routing
3.7. Other Connectors x
3.7.1. ADM/F Connectors 3.7.2. DP and HDMI Connectors 3.7.3. FMC+ Connectors
5. EMIF PCB Routing Guidelines (VPBGA and MBGA) x
5.1. General DDR Signal Routing Guideline on PCB 5.2. LPDDR5 Interface Design Guidelines 5.3. LPDDR4 Interface Design Guidelines 5.4. DDR4 Routing Guidelines 5.5. LPDDR5, LPDDR4 and DDR4 Simulation Strategy
5.4. DDR4 Routing Guidelines x
5.4.1. VREF_CA/RESET Signal Routing Guidelines for Memory Down Topologies 5.4.2. Skew Matching Guidelines for DDR4 Memory Down Configurations 5.4.3. Power Delivery Recommendation for DDR4 Discrete Configurations
8. Power Distribution Network Design Guidelines x
8.1. Agilex™ 5 Power Distribution Network Design Guidelines Overview 8.2. Power Delivery Overview 8.3. Board Power Delivery Network Recommendations 8.4. Board LC Recommended Filters for Noise Reduction in Combined Power Delivery Rails 8.5. PCB PDN Design Guideline for Unused GTS Transceiver 8.6. PCB Voltage Regulator Recommendation for PCB Power Rails 8.7. Board Power Delivery Network Simulations 8.8. Agilex™ 5 Device Family PDN Design Summary
8.1. Agilex™ 5 Power Distribution Network Design Guidelines Overview x
8.1.1. Device Guidelines Status for Agilex™ 5 Devices
8.2. Power Delivery Overview x
8.2.1. Power Architecture 8.2.2. Rail Merger Requirements 8.2.3. Power Rails Specification 8.2.4. Decoupling Capacitors Recommendation
8.2.1. Power Architecture x
8.2.1.1. Power Budget 8.2.1.2. Power Tree
8.2.1.2. Power Tree x
8.2.1.2.1. Recommended Power Tree for the Agilex™ 5 E-Series and D-Series Devices with SmartVID and GTS Transceiver in the Device Packages 8.2.1.2.2. Recommended Power Tree for the Agilex™ 5 E-Series and D-Series Devices with Non-SmartVID and GTS Transceiver in the Device Packages
8.2.3. Power Rails Specification x
8.2.3.1. Power Nets 8.2.3.2. Power Rails Tolerance 8.2.3.3. Power Nets and Transient Specifications
8.2.3.1. Power Nets x
8.2.3.1.1. Agilex™ 5 Package Power Nets and Subsystems Details
8.2.4. Decoupling Capacitors Recommendation x
8.2.4.1. Agilex™ 5 FPGA Packages Board-Level Decoupling Capacitors Summary 8.2.4.2. Agilex™ 5 GTS Transceiver Board-Level Decoupling Capacitors Summary
8.3. Board Power Delivery Network Recommendations x
8.3.1. Board Decoupling Capacitors Guide 8.3.2. FPGA Core Fabric VCC Voltage Regulator Selection 8.3.3. Remote Sense Connections 8.3.4. Load Line Requirements 8.3.5. VCC Core Board Current Slew Rate
8.4. Board LC Recommended Filters for Noise Reduction in Combined Power Delivery Rails x
8.4.1. GTS Transceiver Rail Board Connection and LC Filter Recommendation under Noisy Voltage Regulator
8.5. PCB PDN Design Guideline for Unused GTS Transceiver x
8.5.1. PDN Design Guideline for Unused GTS Transceiver
1. Introduction
2. Overview of Agilex™ 5 Package
3. VPBGA PCB Layout Guideline
4. MBGA PCB Routing Guidelines
5. EMIF PCB Routing Guidelines (VPBGA and MBGA)
6. MIPI Interface Layout Design Guidelines (VPBGA and MBGA)
7. True Differential I/O Interface PCB Routing Guidelines (VPBGA and MBGA)
8. Power Distribution Network Design Guidelines
9. Document Revision History for the PCB High-Speed Signal Design Guidelines: Agilex™ 5 FPGAs and SoCs

8.8. Agilex™ 5 Device Family PDN Design Summary

The summary of the Agilex™ 5 device family PDN design guidelines is as follow:

  1. Current PDN design guidelines stand for the maximum power consumption—the worst use case.
    • If for any reason (various applications, configurations, or the PTC) power data is lower than the maximum power used for the PDN design guideline, you must scale the recommended decoupling capacitors based on the ratio of design current to the maximum current. Use of ratio is an estimate and time domain simulation is mandatory to ensure meeting package ball voltage specification.
  2. Apply the required power-up or power-down sequence grouping on the PCB. For more information, refer to AN692: Power Sequencing Considerations for Cyclone® 10 GX, Arria® 10, Stratix® 10, and Agilex™ 7 and Pin Management User Guide: Agilex™ 5 FPGAs and SoCs..
  3. Use the recommended power tree presented in the Power Tree section for each Agilex™ 5 device with the suggested merged power nets.
  4. Use the recommended voltage regulators in the power tree or design your own voltage regulator based on the required maximum ripple or total current supporting per power rail on the PCB (VRM inductors or bulk capacitors must be designed separately). Tables in the Decoupling Capacitors Recommendation section show the FPGA decoupling capacitors and do not include the voltage regulator bulk capacitors.
  5. Use the recommended bottom-side or FPGA periphery decoupling capacitors for each power net.
  6. Use the recommended LC filters for power nets.
  7. Use of sense line for IR drop compensation.
  8. Ensure your FPGA design follows the maximum recommended step load allowed at the package pin.
  9. Do post-layout simulation for the IR drop analysis to see if this is within the DC specification at the package pin in the Power Rails Tolerance section.
  10. Recommend to do post-layout time domain PCB simulation up to the package pin for critical power nets such as the VCC+VCCP to meet the AC voltage tolerance or specification at the package pin in the Power Rails Tolerance section.
  11. If not meeting the voltage tolerance (DC or AC) at the FPGA package pin, you must check the PCB and update the decoupling capacitors and redo the simulations.
Related Information
Level Two Title