Visible to Intel only — GUID: ipu1575559573061
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Intel® Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Intel® Arria® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
2.16. Upgrading Your Design
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram
3.2. Hardware and Software Requirements
3.3. Directory Structure
3.4. Design Components
3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.6. Clocking Scheme
3.7. Interface Signals
3.8. Design RTL Parameters
3.9. Hardware Setup
3.10. Simulation Testbench
3.11. Upgrading Your Design
Visible to Intel only — GUID: ipu1575559573061
Ixiasoft
2.15.2. SCDC Information from the Sink Connected to TX
You can use this feature to obtain SCDC information.
- Run the Nios® II terminal command on the Nios® II Command Shell:
nios2-terminal
- Press user_pb[2] on the Intel® Arria® 10 FPGA development kit.
The software reads and displays the SCDC information on the sink connected to TX on the Nios® II terminal.