Visible to Intel only — GUID: xgj1619140453305
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel® Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Intel® Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Intel® Arria® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
2.16. Upgrading Your Design
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram
3.2. Hardware and Software Requirements
3.3. Directory Structure
3.4. Design Components
3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.6. Clocking Scheme
3.7. Interface Signals
3.8. Design RTL Parameters
3.9. Hardware Setup
3.10. Simulation Testbench
3.11. Upgrading Your Design
Visible to Intel only — GUID: xgj1619140453305
Ixiasoft
4.3.3.1.4. hdcp2x_tx_kmem.v file
For hdcp2x_tx_kmem.v file:
- To identify the correct HDCP2 TX DCP key file for hdcp2x_tx_kmem.v, make sure the first 4 bytes of the file are “0x00, 0x00, 0x00, 0x01”.
- The keys in the DCP key files are in little-endian format.
- Alternatively, you can apply the lc128_prod from hdcp2x_rx_kmem.v directly into hdcp2x_tx_kmem.v. The keys share the same values.
Figure 40. Wire array of hdcp2x_tx_kmem.v
This figure shows the exact byte mapping from HDCP2 TX DCP key file into hdcp2x_tx_kmem.v.