Visible to Intel only — GUID: khb1686332905053
Ixiasoft
1. Introduction to the Agilex™ 5 Hard Processor System Component
2. Configuring the Agilex™ 5 Hard Processor System Component
3. Simulating the Agilex™ 5 HPS Component
4. Design Guidelines
5. HPS EMIF Platform Designer Example Designs
6. Document Revision History for the Hard Processor System Component Reference Manual Agilex™ 5 SoCs
2.1. Parameterizing the HPS Component
2.2. HPS-FPGA Interfaces
2.3. SDRAM
2.4. HPS Clocks, Reset, Power
2.5. I/O Delays
2.6. Pin Mux and Peripherals
2.7. Generating and Compiling the HPS Component
2.8. Using the Address Span Extender Component
2.9. Configuring the Agilex™ 5 Hard Processor System Component Revision History
2.2.1.1. Enable MPU Standby and Event Signals
2.2.1.2. Enable General Purpose Signals
2.2.1.3. Enable Debug APB* Interface
2.2.1.4. Enable System Trace Macrocell (STM) Hardware Events
2.2.1.5. Enable SWJ-DP JTAG Interface
2.2.1.6. Enable FPGA Cross Trigger Interface
2.2.1.7. Enable AMBA* Trace Bus (ATB)
3.1. Simulation Flows
3.2. Running the Simulation of the Design Examples
3.3. Clock and Reset Interface
3.4. FPGA-to-HPS AXI* Subordinate Interface
3.5. FPGA-to-SDRAM AXI* Subordinate Interface
3.6. HPS-to-FPGA AXI* Initiator Interface
3.7. Lightweight HPS-to-FPGA AXI* Initiator Interface
3.8. Simulating the Agilex™ 5 HPS Component Revision History
5.1. Terminology
5.2. Block Diagram
5.3. Version Support
5.4. Download Example Design Files
5.5. HPS EMIF Platform Designer Example Designs
5.6. Specific Examples
5.7. General Connection Guideline
5.8. Supported Memory Protocols Differences Among Intel SoC Device Families
5.9. IO96 Bank and Lane Usage for HPS EMIF
5.10. Quartus Report of I/O Bank Usage
Visible to Intel only — GUID: khb1686332905053
Ixiasoft
2.1. Parameterizing the HPS Component
- Open the Quartus® Prime software.
Figure 1. Quartus® Prime Starting Screen
- Open Platform Designer by selecting Tools > Platform Designer .
Figure 2. Selecting Platform Designer in Quartus® Prime GUI
- Select an existing Quartus® Prime project and Platform Designer system or create new files. Ensure that Agilex™ 5 device is selected in the Device Family dropdown, and an appropriate device is selected in the Device Part dropdown.
- In the IP Catalog tab, under Library, select Processors and Peripherals > Hard Processor Systems > Hard Processor System Agilex™ 5 FPGA IP.
Figure 3. Platform Designer IP Catalog