RapidIO Intel FPGA IP User Guide

Download PDF
ID 683884
Date 9/15/2021
Public
Document Table of Contents
Document Table of Contents x
Product Discontinuance Notification 1. About the RapidIO Intel FPGA IP Core 2. Getting Started 3. Parameter Settings 4. Functional Description 5. Signals 6. Software Interface 7. Testbench 8. Platform Designer (Standard) Design Example 9. RapidIO Intel FPGA IP User Guide Archives 10. Document Revision History for the RapidIO Intel® FPGA IP User Guide A. Initialization Sequence B. Porting a RapidIO Design from the Previous Version of Software
1. About the RapidIO Intel FPGA IP Core x
1.1. Features 1.2. Device Family Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Device Speed Grades 1.6. Release Information
1.1. Features x
1.1.1. Supported Transactions
1.3. IP Core Verification x
1.3.1. Simulation Testing 1.3.2. Hardware Testing 1.3.3. Interoperability Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Generating IP Cores 2.3. IP Core Generation Output ( Intel® Quartus® Prime Standard Edition) 2.4. RapidIO IP Core Testbench Files 2.5. Simulating IP Cores 2.6. Integrating Your IP Core in Your Design 2.7. Specifying Timing Constraints 2.8. Compiling the Full Design and Programming the FPGA 2.9. Instantiating Multiple RapidIO IP Cores
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.2. Generating IP Cores x
2.2.1. IP Core Generation Output ( Intel® Quartus® Prime Pro Edition)
2.5. Simulating IP Cores x
2.5.1. Simulating the Testbench with the ModelSim Simulator 2.5.2. Simulating the Testbench with the VCS Simulator 2.5.3. Simulating the Testbench with the Xcelium Simulator
2.6. Integrating Your IP Core in Your Design x
2.6.1. Calibration Clock 2.6.2. Dynamic Transceiver Reconfiguration Controller 2.6.3. Transceiver Settings 2.6.4. Adding Transceiver Analog Settings for Arria II GX, Arria II GZ, and Stratix IV GX Variations 2.6.5. External Transceiver PLL 2.6.6. Transceiver PHY Reset Controller for Intel® Arria® 10 and Intel® Cyclone® 10 GX Variations
2.9. Instantiating Multiple RapidIO IP Cores x
2.9.1. Clock and Signal Requirements for Arria® V, Cyclone® V, and Stratix® V Variations 2.9.2. Clock and Signal Requirements for Arria II GX, Arria II GZ, Cyclone IV GX, and Stratix IV GX Variations 2.9.3. Correcting the Synopsys Design Constraints File to Distinguish RapidIO IP Core Instances 2.9.4. Sourcing Multiple Tcl Scripts for Variations other than Intel® Arria® 10 and Intel® Cyclone® 10 GX
3. Parameter Settings x
3.1. Physical Layer Settings 3.2. Transport and Maintenance Settings 3.3. I/O and Doorbell Settings 3.4. Capability Registers Settings
3.1. Physical Layer Settings x
3.1.1. Device Options 3.1.2. Data Settings 3.1.3. Receive Priority Retry Thresholds 3.1.4. Transceiver Settings
3.2. Transport and Maintenance Settings x
3.2.1. Transport Layer 3.2.2. Input/Output Maintenance Logical Layer Module 3.2.3. Port Write
3.3. I/O and Doorbell Settings x
3.3.1. I/O Logical Layer Interfaces 3.3.2. I/O Slave Address Width 3.3.3. I/O Read and Write Order Preservation 3.3.4. Avalon® -MM Master 3.3.5. Avalon® -MM Slave 3.3.6. Doorbell Slave
3.4. Capability Registers Settings x
3.4.1. Device Registers 3.4.2. Assembly Registers 3.4.3. Processing Element Features 3.4.4. Switch Support 3.4.5. Data Messages
4. Functional Description x
4.1. Interfaces 4.2. Clocking and Reset Structure 4.3. Physical Layer 4.4. Transport Layer 4.5. Logical Layer Modules 4.6. Error Detection and Management
4.1. Interfaces x
4.1.1. RapidIO Interface 4.1.2. Avalon® Memory Mapped ( Avalon® -MM) Master and Slave Interfaces 4.1.3. Avalon® Streaming ( Avalon® -ST) Interface
4.1.2. Avalon® Memory Mapped ( Avalon® -MM) Master and Slave Interfaces x
4.1.2.1. Avalon® -MM Interface Widths in the RapidIO IP Core 4.1.2.2. Avalon® -MM Interface Byte Ordering
4.2. Clocking and Reset Structure x
4.2.1. RapidIO IP Core Clocking 4.2.2. Reset for RapidIO IP Cores
4.2.1. RapidIO IP Core Clocking x
4.2.1.1. Avalon® System Clock 4.2.1.2. Reference Clock 4.2.1.3. Other Input Clocks 4.2.1.4. Clock Domains 4.2.1.5. Baud Rates and Clock Frequencies
4.2.2. Reset for RapidIO IP Cores x
4.2.2.1. General RapidIO Reset Signal Requirements 4.2.2.2. Reset Controller 4.2.2.3. Reset Requirements for Arria® V, Cyclone® V, and Stratix® V Variations 4.2.2.4. Reset Requirements for Intel® Arria® 10 and Intel® Cyclone® 10 GX Variations 4.2.2.5. RapidIO IP Core Reset Behavior
4.3. Physical Layer x
4.3.1. Features 4.3.2. Physical Layer Architecture 4.3.3. Low-level Interface Receiver 4.3.4. Low-Level Interface Transmitter 4.3.5. Protocol and Flow Control Engine 4.3.6. Physical Layer Receive Buffer 4.3.7. Physical Layer Transmit Buffer
4.3.3. Low-level Interface Receiver x
4.3.3.1. Receiver Transceiver 4.3.3.2. CRC Checking and Removal
4.3.4. Low-Level Interface Transmitter x
4.3.4.1. Transmitter Transceiver
4.3.6. Physical Layer Receive Buffer x
4.3.6.1. Error Conditions that Flush the Receive Buffer 4.3.6.2. Error Conditions Flagged for the Transport Layer 4.3.6.3. Receive Priority Threshold Values
4.3.7. Physical Layer Transmit Buffer x
4.3.7.1. Transmit and Retransmit Queues 4.3.7.2. Error Conditions that Flush the Transmit Buffer 4.3.7.3. Forced Compensation Sequence Insertion
4.4. Transport Layer x
4.4.1. Receiver 4.4.2. Transaction ID Ranges 4.4.3. Transmitter
4.5. Logical Layer Modules x
4.5.1. Concentrator Register Module 4.5.2. Maintenance Module 4.5.3. Input/Output Logical Layer Modules 4.5.4. Doorbell Module 4.5.5. Avalon® -ST Pass-Through Interface
4.5.2. Maintenance Module x
4.5.2.1. Maintenance Register 4.5.2.2. Maintenance Slave Processor 4.5.2.3. Maintenance Master Processor 4.5.2.4. Port-Write Processor 4.5.2.5. Maintenance Module Error Handling
4.5.2.4. Port-Write Processor x
4.5.2.4.1. Port-Write Transmission 4.5.2.4.2. Port-Write Reception
4.5.3. Input/Output Logical Layer Modules x
4.5.3.1. Input/Output Avalon® -MM Master Module 4.5.3.2. Input/Output Avalon® -MM Master Module Timing Diagrams 4.5.3.3. Input/Output Avalon® -MM Slave Module 4.5.3.4. Avalon® -MM Burstcount and Byteenable Encoding in RapidIO Packets 4.5.3.5. Input/Output Avalon® -MM Slave Module Timing Diagrams
4.5.3.1. Input/Output Avalon® -MM Master Module x
4.5.3.1.1. Input/Output Avalon® -MM Master Address Mapping Windows
4.5.3.3. Input/Output Avalon® -MM Slave Module x
4.5.3.3.1. Keeping Track of I/O Write Transactions 4.5.3.3.2. Input/Output Avalon® -MM Slave Address Mapping Windows 4.5.3.3.3. Input/Output Slave Translation Window Example 4.5.3.3.4. Translation Window 0 4.5.3.3.5. Translation Window 1 4.5.3.3.6. Translation Window 2
4.5.4. Doorbell Module x
4.5.4.1. Doorbell Module Block Diagram 4.5.4.2. Preserving Transaction Order 4.5.4.3. Doorbell Message Generation 4.5.4.4. Doorbell Message Reception
4.5.5. Avalon® -ST Pass-Through Interface x
4.5.5.1. Pass-Through Interface Examples
4.6. Error Detection and Management x
4.6.1. Physical Layer Error Management 4.6.2. Logical Layer Error Management 4.6.3. Avalon® -ST Pass-Through Interface
4.6.1. Physical Layer Error Management x
4.6.1.1. Protocol Violations 4.6.1.2. Fatal Errors
4.6.2. Logical Layer Error Management x
4.6.2.1. Maintenance Avalon® -MM Slave 4.6.2.2. Maintenance Avalon® -MM Master 4.6.2.3. Port-Write Reception Module 4.6.2.4. Port-Write Transmission Module 4.6.2.5. Input/Output Avalon® -MM Slave 4.6.2.6. Input/Output Avalon® -MM Master
4.6.2.1. Maintenance Avalon® -MM Slave x
4.6.2.1.1. Standard Error Management Registers 4.6.2.1.2. Registers in the Implementation Defined Space 4.6.2.1.3. Maintenance Avalon® -MM Slave Interface's Error Indication Signal
4.6.2.5. Input/Output Avalon® -MM Slave x
4.6.2.5.1. Standard Error Management Registers 4.6.2.5.2. Registers in the Implementation Defined Space 4.6.2.5.3. The Avalon® -MM Slave Interface's Error Indication Signal
4.6.2.6. Input/Output Avalon® -MM Master x
4.6.2.6.1. Standard Error Management Registers 4.6.2.6.2. Response Packets with ERROR Status
5. Signals x
5.1. Physical Layer Signals 5.2. Transport and Logical Layer Signals
5.1. Physical Layer Signals x
5.1.1. Status Packet and Error Monitoring Signals 5.1.2. Multicast Event Signals 5.1.3. Receive Priority Retry Threshold-Related Signals 5.1.4. Physical Layer Buffer Status Signals 5.1.5. Transceiver Signals 5.1.6. Register-Related Signals
5.2. Transport and Logical Layer Signals x
5.2.1. Avalon® -MM Interface Signals 5.2.2. Avalon® -ST Pass-Through Interface Signals 5.2.3. Error Management Extension Signals 5.2.4. Packet and Error Monitoring Signal for the Transport Layer
6. Software Interface x
6.1. Physical Layer Registers 6.2. Transport and Logical Layer Registers
6.2. Transport and Logical Layer Registers x
6.2.1. Capability Registers (CARs) 6.2.2. Command and Status Registers (CSRs) 6.2.3. Maintenance Interrupt Control Registers 6.2.4. Receive Maintenance Registers 6.2.5. Transmit Maintenance Registers 6.2.6. Transmit Port-Write Registers 6.2.7. Receive Port-Write Registers 6.2.8. Input/Output Master Address Mapping Registers 6.2.9. Input/Output Slave Mapping Registers 6.2.10. Input/Output Slave Interrupts 6.2.11. Transport Layer Feature Register 6.2.12. Error Management Registers 6.2.13. Doorbell Message Registers
7. Testbench x
7.1. Reset, Initialization, and Configuration 7.2. Maintenance Write and Read Transactions 7.3. SWRITE Transactions 7.4. NWRITE_R Transactions 7.5. NWRITE Transactions 7.6. NREAD Transactions 7.7. Doorbell Transactions 7.8. Doorbell and Write Transactions With Transaction Order Preservation 7.9. Port-Write Transactions 7.10. Transactions Across the Avalon® -ST Pass-Through Interface
8. Platform Designer (Standard) Design Example x
8.1. Creating a New Intel® Quartus® Prime Project 8.2. Running Platform Designer (Standard) 8.3. Simulating the System
8.2. Running Platform Designer (Standard) x
8.2.1. Adding and Parameterizing the RapidIO Component 8.2.2. Adding and Connecting Other System Components 8.2.3. Connecting Clocks and the System Components 8.2.4. Generating the System
8.2.2. Adding and Connecting Other System Components x
8.2.2.1. Adding the Master Maintenance BFM 8.2.2.2. Adding the Master I/O BFM 8.2.2.3. Adding the On-Chip Memory
8.2.3. Connecting Clocks and the System Components x
8.2.3.1. Connecting Unconnected Clocks 8.2.3.2. Connecting System Components 8.2.3.3. Assigning Addresses and Setting the Clock Frequency
B. Porting a RapidIO Design from the Previous Version of Software x
B.1. Upgrading a RapidIO Design Without Changing Device Family B.2. Upgrading a RapidIO Design to the Intel® Arria® 10 and Intel® Cyclone® 10 GX Device Families
Product Discontinuance Notification
1. About the RapidIO Intel FPGA IP Core
2. Getting Started
3. Parameter Settings
4. Functional Description
5. Signals
6. Software Interface
7. Testbench
8. Platform Designer (Standard) Design Example
9. RapidIO Intel FPGA IP User Guide Archives
10. Document Revision History for the RapidIO Intel® FPGA IP User Guide
A. Initialization Sequence
B. Porting a RapidIO Design from the Previous Version of Software

5.1. Physical Layer Signals

Below tables lists the pins used by the Physical layer of the RapidIO IP core.

Table 31.  RapidIO Interface
Signal Direction Description Exported by Platform Designer (Standard)
rd Input Receive data—a unidirectional data receiver. It is connected to the td bus of the transmitting device. yes
td Output Transmit data—a unidirectional data driver. The td bus of one device is connected to the rd bus of the receiving device. yes
Table 32.  Main Clock Signals
Signal Direction Description
sysclk 32 Input Avalon® system clock
clk Input Physical layer reference clock.

In Intel® Arria® 10 and Intel® Cyclone® 10 GX variations, this clock is the reference clock for the RX CDR block in the transceiver. In other variations, this clock is also the reference clock for the TX PLL in the transceiver.

Table 33.  Global Signals
Signal Direction Description
reset_n Input Active-low system reset. In variations that implement only the Physical layer, this reset signal is associated with the reference clock. In variations with a Transport layer this reset is associated with the Avalon® system clock.

reset_n can be asserted asynchronously, but must stay asserted at least one clock cycle and must be de-asserted synchronously with the clock with which it is associated.

Intel® recommends that you apply an explicit 1 to 0 transition on the reset_n input port in simulation, to ensure that the simulation model is properly reset.

In the Platform Designer (Standard) flow, this signal is named clock_reset by default.

In Arria® V, Cyclone® V, and Stratix® V devices, the reset_n signal must be asserted synchronously with the embedded PHY IP core phy_mgmt_clk_reset signal. In addition, reset_n should not be deasserted when the Transceiver Reconfiguration Controller reconfig_busy signal is high.

rxclk Output Receive-side recovered clock. This signal is derived from the rxgxbclk clock—a clock driven by the transceiver—by division by 1 or 2, depending on the configuration of the IP core. For the frequency of this clock for each baud rate and mode.
txclk Output The internal clock of the Physical layer. This signal is derived from the txgxbclk clock—a clock driven by the transceiver—by division by 1 or 2, depending on the configuration of the IP core. For the frequency of this clock for each baud rate and mode.

This clock runs reliably only after the transceiver transmitter PLL is locked to the reference clock, which you can detect by monitoring the gxbpll_locked signal. If you use this clock to drive the Avalon® system clock, you must ensure you do not deassert reset_n before gxbpll_locked is asserted.

Table 34.  Status Packet and Error Monitoring
Output Signal Clock Domain Description Exported by Platform Designer (Standard)
packet_transmitted txclk Pulsed high for one clock cycle when a packet’s transmission completes normally. yes
packet_cancelled txclk Pulsed high for one clock cycle when a packet’s transmission is canceled by sending a stomp, a restart-from-retry, or a link-request control symbol. yes
packet_accepted rxclk Pulsed high for one clock cycle when a packet-accepted control symbol is being transmitted. yes
packet_retry rxclk Pulsed high for one clock cycle when a packet-retry control symbol is being transmitted. yes
packet_not_accepted rxclk Pulsed high for one clock cycle when a packet-not-accepted control symbol is being transmitted. yes
packet_crc_error rxclk Pulsed high for one clock cycle when a CRC error is detected in a received packet. yes
symbol_error rxclk Pulsed high for one clock cycle when a corrupted symbol is received. yes
port_initialized txclk This signal indicates that the RapidIO initialization sequence has completed successfully.

This is a level signal asserted high while the initialization state machine is in the 1X_MODE, 2X_MODE, or 4X_MODE state, as described in paragraph 4.6 of Part VI of the RapidIO Specification.

yes
port_error txclk This signal holds the value of the PORT_ERR bit of the Port 0 Error and Status CSR (offset 0x158) described in Table 6–10 on page 6–7. yes
char_err rxclk Pulsed for one clock cycle when an invalid character or a valid but illegal character is detected. yes
Related Information
32 You must ensure that you drive this clock from a clock source that is running reliably when the RapidIO IP core comes out of reset.
Level Two Title