Developer Guide

Intel oneAPI FPGA Handbook

Download PDF
ID 785441
Date 2/07/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
Intel® oneAPI FPGA Handbook Introduction To FPGA Design Concepts Intel oneAPI FPGA Development Defining a Kernel for FPGAs Debugging and Verifying Your Design Analyzing Your Design Optimizing Your Kernel Optimizing Your Host Application Integrating Your RTL IP Core Into a System RTL IP Core Kernel Interfaces Loops Pipes Data Types and Arithmetic Operations Parallelism Memories and Memory Operations Libraries Additional FPGA Acceleration Flow Considerations Additional SYCL* HLS Flow Considerations FPGA Optimization Flags, Attributes, Pragmas, and Extensions Quick Reference Additional Information Document Revision History for the Intel oneAPI FPGA Handbook Notices and Disclaimers
Introduction To FPGA Design Concepts x
FPGA Architecture Overview Concepts of FPGA Hardware Design How Source Code Becomes a Custom Hardware Datapath
How Source Code Becomes a Custom Hardware Datapath x
Mapping Source Code Instructions to Hardware Scheduling Mapping Parallelism Models to FPGA Hardware Memory Types
Intel oneAPI FPGA Development x
FPGA Flow Terminology Intel oneAPI FPGA Development Flow Types of SYCL* FPGA Compilation FPGA Compilation Flags FPGA Workflows in IDEs
Types of SYCL* FPGA Compilation x
Separating Device and Host Code Compilation
Defining a Kernel for FPGAs x
Suggested Kernel Coding Styles Single Work-Item Kernels
Single Work-Item Kernels x
Single Work-item Kernel Design Guidelines Single-Cycle Floating-Point Accumulator for Single Work-Item Kernels
Single-Cycle Floating-Point Accumulator for Single Work-Item Kernels x
Strategies for Inferring the Accumulator
Debugging and Verifying Your Design x
Device Selectors for FPGA printf Command Restrictions Emulate and Debug Your Design Evaluate Your Kernel Through Simulation
Emulate and Debug Your Design x
Emulator Environment Variables Compile and Emulate Your Design Limitations of the Emulator Troubleshooting Discrepancies in Hardware and Emulator Results Emulator Known Issues
Evaluate Your Kernel Through Simulation x
Debug During Verification Simulation Prerequisites Installing the Questa*-Intel FPGA Edition Software Set Up the Simulation Environment Compile a Kernel for Simulation Simulate Your Kernel Viewing Simulation Waveforms Troubleshooting Simulator Issues
Analyzing Your Design x
Analyze the FPGA Early Image Analyze the FPGA Image Review the FPGA Optimization Report Quartus (Static) Summary Intel® FPGA Dynamic Profiler for DPC++ System-level Profiling Using the Intercept Layer for OpenCL™ Applications
Review the FPGA Optimization Report x
Loop Analysis Bottlenecks Viewer Area Estimates System Viewer Kernel Memory Viewer Schedule Viewer Access HLD FPGA Reports in JSON Format
Quartus (Static) Summary x
Timing Failures
Intel® FPGA Dynamic Profiler for DPC++ x
Measure Kernel Performance Instrument the Kernel Pipeline with Performance Counters (-Xsprofile) Obtain Profiling Data During Run Time Reduce Area Resource Use While Profiling Profiler Analyses of Example SYCL* Design Scenarios Limitations
Obtain Profiling Data During Run Time x
Invoke the Profiler Runtime Wrapper to Obtain Profiling Data Use Intel® VTune™ Profiler
Use Intel® VTune™ Profiler x
Interpret Performance Counter Data
System-level Profiling Using the Intercept Layer for OpenCL™ Applications x
Set Up the Intercept Layer for OpenCL™ Applications
Optimizing Your Host Application x
Throughput Resource Use Multi-Threaded Host Application Utilizing Hardware Kernel Invocation Queue Double Buffering Host Utilizing Kernel Invocation Queue N-Way Buffering to Overlap Kernel Execution Prepinning Memory Simple Host-Device Streaming Buffered Host-Device Streaming
Double Buffering Host Utilizing Kernel Invocation Queue x
Applying Double-Buffering Using the Intercept Layer for OpenCL™ Applications
Integrating Your RTL IP Core Into a System x
Synthesize Your RTL IP Core with Intel Quartus Prime Software Add RTL IP Component into a Platform Designer System Add an RTL IP Component into an Intel® Quartus® Prime Project Encrypt RTL IP Components for Distribution
RTL IP Core Kernel Interfaces x
Kernel Argument Interfaces Memory-Mapped (MM) Agent Kernel Invocation Interface Ready/Valid Handshaking Kernel Invocation Interface Memory-Mapped Host Interfaces
Memory-Mapped Host Interfaces x
Memory-Mapped Host Interfaces Using Unified Shared Memory Pointers and the annotated_arg Class Memory-Mapped Host Interfaces Using Accessors (Deprecated) Memory-Mapped Host Interfaces Using Unified Shared Memory Pointers and the mmhost Macro
Memory-Mapped Host Interfaces Using Unified Shared Memory Pointers and the annotated_arg Class x
Buffer Locations in Memory-Mapped Host Interfaces The annotated_arg Template Class
Loops x
Refactor the Loop-Carried Data Dependency Relax Loop-Carried Dependency Transfer Loop-Carried Dependency to Local Memory Minimize the Memory Dependencies for Loop Pipelining Unroll Loops Fuse Loops to Reduce Overhead and Improve Performance Optimize Loops With Loop Speculation Remove Loop Bottlenecks Improve fMAX/II with Shannonization Optimize Inner Loop Throughput Improve Loop Performance by Caching Data in On-Chip Memory
Pipes x
Host Pipes Pipes Extension Emulate Applications with a Pipe That Reads or Writes to an I/O Pipe
Host Pipes x
Host Pipe Declaration Host Pipe API Host Pipes RTL Interfaces
Pipes Extension x
Key Properties of a Pipe Accessing Pipes The pipe Class and its Use I/O Pipes Characteristics of Pipes Restrictions of Pipes Guidelines for Designing Pipes The atomic_fence Function and Pipes Example Code for Using the atomic_fence Function and Blocking Inter-Kernel Pipes
Data Types and Arithmetic Operations x
Optimize Floating-point Operation Avoid Expensive Functions Variable-Precision Data Type Support
Variable-Precision Data Type Support x
Advantages and Limitations of Variable Precision Data Types Declare and Use the AC Data Types
Declare and Use the AC Data Types x
Declare the ac_int Data Type Declare the ac_fixed Data Type Declare the ac_complex Data Type Declare the ap_float Data Type
Declare the ap_float Data Type x
Conversion Rules for the ap_float Data Type Operations with Explicit Precision Controls Comparison Operators Additional ap_float Functions Additional Data Types Provided by the ap_float.hpp Header File Quality of Results and the ap_float Data Type
Parallelism x
Pipelined Kernels NDRange Kernels Asynchronous Parallelism Within Kernels (task_sequence)
Pipelined Kernels x
Stable Arguments
Asynchronous Parallelism Within Kernels (task_sequence) x
Task Functions task_sequence Use Cases
Memories and Memory Operations x
The device_global Extension (Beta) Memory Accesses Kernel Variable Accesses
Memory Accesses x
Load-Store Units Global Memory Accesses Optimization Perform Kernel Computations Using Local or Private Memory Local and Private Memory Accesses Optimization Annotating Unified Shared Memory Pointers Zero-Copy Memory Access Additional Recommendations
Load-Store Units x
Load-Store Unit Styles Load-Store Unit Modifiers Load-Store Unit Controls
Global Memory Accesses Optimization x
Global Memory Bandwidth Use Calculation Manual Partition of Global Memory Partitioning Buffers Across Different Memory Types (Heterogeneous Memory) Partitioning Buffers Across Memory Channels of the Same Memory Type Ignoring Dependencies Between Accessor Arguments Contiguous Memory Accesses Static Memory Coalescing
Libraries x
Use SYCL Shared Library With Third-Party Applications Use of RTL Libraries for FPGA Object Manifest File Syntax of an RTL Library Restrictions and Limitations in RTL Support Intel® Stratix® 10 and Intel Agilex® 7 Design-Specific Reset Requirements for Stall-Free and Stallable RTL Libraries Stall-Free RTL
Additional FPGA Acceleration Flow Considerations x
FPGA-CPU Interaction FPGA BSPs and Boards Targeting Multiple Homogeneous FPGA Devices Targeting Multiple Platforms Split Kernel into Multiple FPGA Images (Linux only)
FPGA BSPs and Boards x
FPGA Board Initialization Obtain FPGA Hardware Image Information Extracting the FPGA Hardware Configuration (.aocx) File from a Multiarchitecture Binary File
Additional SYCL* HLS Flow Considerations x
IP Component Reset Behavior
FPGA Optimization Flags, Attributes, Pragmas, and Extensions x
Optimization Flags Optimization Targets Kernel Variables Kernel Attributes Memory Attributes Loop Directives Floating-Point Pragmas Latency Controls (Beta)
Optimization Flags x
Specify Schedule FMAX Target for Kernels (-Xsclock=<clock target>) Create a 2xclock Interface (-Xsuse-2xclock) Disable Burst-Interleaving of Global Memory (-Xsno-interleaving=<global_memory_name>) Force Ring Interconnect for Global Memory (-Xsglobal-ring) Force a Single Store Ring to Reduce Area (-Xsforce-single-store-ring) Force Fewer Read Data Reorder Units to Reduce Area (-Xsnum-reorder) Disable Hardware Kernel Invocation Queue (-Xsno-hardware-kernel-invocation-queue) Modify the Handshaking Protocol Between Clusters (-Xshyper-optimized-handshaking) Disable Automatic Fusion of Loops (-Xsdisable-auto-loop-fusion) Fuse Adjacent Loops With Unequal Trip Counts (-Xsenable-unequal-tc-fusion) Pipeline Loops in Non-task Kernels (-Xsauto-pipeline) Control Semantics of Floating-Point Operations (-fp-model=<value>) Modify the Rounding Mode of Floating-point Operations (-Xsrounding=<rounding_type>) Global Control of Exit FIFO Latency of Stall-free Clusters (-Xssfc-exit-fifo-type=<value>) Enable the Read-Only Cache for Read-Only Accessors (-Xsread-only-cache-size=<N>) Control Hardware Implementation of the Supported Data Types and Math Operations (-Xsdsp-mode=<option>) Generate Register Map Wrapper (-Xsregister-map-wrapper-type)
Optimization Targets x
Minimum Latency Flow Balanced Throughput-Area Trade-Offs Flow
Kernel Attributes x
Specify Schedule FMAX Target for Kernels Specify a Workgroup Size Specify Number of SIMD Work Items Omit Hardware that Generates and Dispatches Kernel IDs Omit Hardware to Support the no_global_work_offset Attribute in parallel_for Kernels Reduce Kernel Area and Latency
Loop Directives x
disable_loop_pipelining Attribute initiation_interval Attribute ivdep Attribute loop_coalesce Attribute max_concurrency Attribute max_interleaving Attribute speculated_iterations Attribute unroll Pragma Loop Fuse Functions and nofusion Attribute max_reinvocation_delay Attribute (Beta)
Quick Reference x
Algorithmic C Data Types Floating Point Pragmas FPGA Accessor Properties FPGA Extensions FPGA Kernel Attributes FPGA Local Memory Function Latency Control Properties (Beta) FPGA LSU Controls FPGA Loop Directives FPGA Memory Attributes FPGA Optimization Flags Pipe API
Intel® oneAPI FPGA Handbook
Introduction To FPGA Design Concepts
Intel oneAPI FPGA Development
Defining a Kernel for FPGAs
Debugging and Verifying Your Design
Analyzing Your Design
Optimizing Your Kernel
Optimizing Your Host Application
Integrating Your RTL IP Core Into a System
RTL IP Core Kernel Interfaces
Loops
Pipes
Data Types and Arithmetic Operations
Parallelism
Memories and Memory Operations
Libraries
Additional FPGA Acceleration Flow Considerations
Additional SYCL* HLS Flow Considerations
FPGA Optimization Flags, Attributes, Pragmas, and Extensions
Quick Reference
Additional Information
Document Revision History for the Intel oneAPI FPGA Handbook
Notices and Disclaimers

The atomic_fence Function and Pipes

ATTENTION:

This topic assumes that you already have an understanding of the atomic_fence function described in the SYCL specification. If you are new to it, then before you proceed, read about the atomic_fence function in the Khronos* SYCL Specification.

When running kernels in parallel, you might want multiple kernels to collaboratively access a shared memory. SYCL* provides the atomic_fence function as a synchronization construct to reason about the order of memory instructions accessing the shared memory. The atomic_fence function controls the reordering of memory load and store operations (subject to the associated memory order and memory scope) when paired with synchronization through an atomic object. Pipe read and write operations behave as if they are SYCL-relaxed atomic load and store operations. When paired with atomic_fence functions to establish a synchronizes-with relationship, pipe operations can provide guarantee on side-effect visibility in memory, as defined by the SYCL memory model. For additional information about the atomic_fence function, refer to the Khronos* SYCL Specification.

CAUTION:

The current atomic_fence function for FPGA uses an overly conservative implementation and is still preliminary.

  • The implementation guarantees only functional correctness and not the maximum performance because the atomic_fence function currently enforces more memory ordering than it requires. If you do not use the atomic_fence function with a correct memory_order parameter, then you might see unexpected behavior in your program when the atomic_fence function handles memory ordering properly in a future release.
  • The implementation does not support the memory_scope::system constraint. The broadest scope supported for FPGA is the memory_scope::device constraint.

Example Code for Using the atomic_fence Function and Blocking Inter-Kernel Pipes

The following code sample shows how to use the atomic_fence function with a blocking inter-kernel pipe to synchronize the load and store to a shared device memory between a producer and a consumer: 

#include <sycl/sycl.hpp>
using namespace sycl;
using my_pipe = ext::intel::pipe<class some_pipe, int>;
constexpr int READY = 1;
 
int produce_data(int data);
int consume_data(int data);
 
event Producer(queue&q, int *shared_ptr, size_t size) {
  return q.submit([&](handler& h) {
    h.single_task<class ProducerKernel>([=]() [[intel::kernel_args_restrict]] {
      // create a device pointer to explicitly inform the compiler the
      // pointer resides in the device's address space
      device_ptr<int> shared_ptr_d(shared_ptr);
 
      // produce data
      for (size_t i = 0; i < size; i++) {
        shared_ptr_d[i] = produce_data(i);
      }
      // use atomic_fence to ensure memory ordering
      atomic_fence(memory_order::seq_cst, memory_scope::device);
      // notify the consumer to start data processing
      my_pipe::write(READY);
    });
  }
}
 
event Consumer(queue & q, int* shared_ptr, size_t size, int *output_ptr) {
  return q.submit([&](handler& h) {
    h.single_task<class ConsumerKernel>([=]() [[intel::kernel_args_restrict]] {
      // create device pointers to explicitly inform the compiler these
      // pointer reside in the device's address space
      device_ptr<int> shared_ptr_d(shared_ptr);
      device_ptr<int> out_ptr_d(output_ptr);
 
      // wait on the blocking pipe_read until notified by the producer
      int ready = my_pipe::read();
 
      // use atomic_fence to ensure memory ordering
      atomic_fence(memory_order::seq_cst, memory_scope::device);
 
      // consume data and write to output memory address
      for(int i = 0; i < size; i++) {
        out_ptr_d[i] = consume_data(shared_ptr_d[i]);
      }
    });
  });
}

In the above example, the consumer loads data produced by the producer. To prevent a scenario where the consumer loads the shared device memory before the producer finishes storing to it, a blocking pipe is used to synchronize between the two kernels. The consumer’s pipe read does not return until it sees the READY written by the producer. In this example, the atomic_fence functions in the producer and consumer prevent the shared memory read and write from being reordered with the pipe instructions. They also form a release-acquire ordering, which ensures that by the time the consumer sees the pipe read returns, the producer's write operation to the shared device memory is also visible to the consumer.

NOTE:

The shared device memory is created using a USM device allocation that allows the two kernels to be running in parallel even though they both access the shared device memory simultaneously.

Parent topic: Pipes Extension
Level Two Title