Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series

Download PDF
ID 721819
Date 9/05/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview 2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture 3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter 4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver 5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide 6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines 9. Agilex™ 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines 10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series 11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture x
2.1. F-Series and I-Series GPIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Differential I/O Bit Position 3.4. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations
3.4. Clocking the Differential Transmitters x
3.4.1. Transmitter Output Clock Parameters Settings
3.4.1. Transmitter Output Clock Parameters Settings x
3.4.1.1. Edge-Aligned tx_outclock to tx_out 3.4.1.2. Center-Aligned tx_outclock to tx_out
4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings
4.2.1. Receiver Input Clock Parameters Settings x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Generating the LVDS SERDES Intel® FPGA IP 5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.6. LVDS SERDES Intel® FPGA IP Signals
5.1.4. Generating the LVDS SERDES Intel® FPGA IP x
5.1.4.1. Intel® FPGA IP Generation Output
5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.5.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.5.2. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.5.3. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.5.4. LVDS SERDES Intel® FPGA IP Transmitter Settings 5.1.5.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS SERDES Transmitters and Receivers in the Same GPIO Bank
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview
2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture
3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter
4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver
5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide
6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines
9. Agilex™ 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series
11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series

7.1. LVDS SERDES IP Synthesizable Quartus® Prime Design Examples

The synthesizable design example is a compilation-ready Platform Designer system that you can include in a Quartus® Prime project.

The design example uses the parameter settings you configured in the IP parameter editor:

  • Basic LVDS SERDES IP system with transmitters or receivers
  • LVDS SERDES IP system with transmitters or receivers connected to an external PLL
Figure 32. Basic LVDS SERDES IP System with Internal PLL


If you configured the IP to use an external PLL, the generated design example connects a properly configured IOPLL Intel® FPGA IP.

Figure 33.  LVDS SERDES IP System with External PLLIn this figure, a qsys_interface_bridge provides Platform Designer connections between the IOPLL IP and the LVDS SERDES IP. For simplicity, this bridge is not shown in the other figures.


To demonstrate how to configure the PLL, the design example also provides the lvds_external_pll.qsys Platform Designer file containing a standalone version of the IOPLL IP configured to work as an external PLL. You can use lvds_external_pll.qsys, modified or unmodified, to build an LVDS SERDES design with external PLL.

Generating and Using the Design Example

To generate the synthesizable Quartus® Prime design example from the source files, run the following command in the design example directory: 

quartus_sh -t make_qii_design.tcl -system ed_synth

The TCL script creates a qii directory that contains the ed_synth.qpf project file. You can open and compile this project in the Quartus® Prime software.

For more information about make_qii_design.tcl arguments, run the following command: 

quartus_sh -t make_qii_design.tcl -help
Level Two Title