Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series

Download PDF
ID 721819
Date 9/05/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview 2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture 3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter 4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver 5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide 6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines 9. Agilex™ 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines 10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series 11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture x
2.1. F-Series and I-Series GPIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Differential I/O Bit Position 3.4. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations
3.4. Clocking the Differential Transmitters x
3.4.1. Transmitter Output Clock Parameters Settings
3.4.1. Transmitter Output Clock Parameters Settings x
3.4.1.1. Edge-Aligned tx_outclock to tx_out 3.4.1.2. Center-Aligned tx_outclock to tx_out
4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings
4.2.1. Receiver Input Clock Parameters Settings x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Generating the LVDS SERDES Intel® FPGA IP 5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.6. LVDS SERDES Intel® FPGA IP Signals
5.1.4. Generating the LVDS SERDES Intel® FPGA IP x
5.1.4.1. Intel® FPGA IP Generation Output
5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.5.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.5.2. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.5.3. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.5.4. LVDS SERDES Intel® FPGA IP Transmitter Settings 5.1.5.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS SERDES Transmitters and Receivers in the Same GPIO Bank
1. Agilex™ 7 F-Series and I-Series LVDS SERDES Overview
2. Agilex™ 7 F-Series and I-Series LVDS SERDES Architecture
3. Agilex™ 7 F-Series and I-Series LVDS SERDES Transmitter
4. Agilex™ 7 F-Series and I-Series LVDS SERDES Receiver
5. Agilex™ 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide
6. Agilex™ 7 F-Series and I-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 7 F-Series and I-Series LVDS SERDES Design Guidelines
9. Agilex™ 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series
11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: F-Series and I-Series

5.1.4. Generating the LVDS SERDES Intel® FPGA IP

Using the LVDS SERDES Intel® FPGA IP parameter editor, you can customize the IP settings and generate the IP variant files, simulation testbench, and HDL instantiation template.
Before you begin, create or open a Quartus® Prime project.
Figure 22.  LVDS SERDES Intel FPGA IP Parameter Editor
  1. In the IP Catalog window, double-click LVDS SERDES Intel® FPGA IP .
    The Parameter Editor window appears.
  2. Specify a top-level name for your new IP variant and click Create.
    Do not include space and special characters in the name and file path.
  3. Set the values in the Parameters tab.
    The System Messages tab displays errors and warning for the parameters settings.
  4. From the Parameter Editor menu, select File > Save.
    The parameter editor saves the IP variant settings in the <your_ip> .ip file.
  5. To generate the IP variant HDL files:
    1. Click Generate HDL.
      The Generation window appears.
    2. Specify the output file generation options and click Generate.
      The parameter editor generates the synthesis and simulation files as you specified, and automatically adds the .ip file of the variant to your project.
    3. Click Close.
  6. To generate a simulation testbench:
    1. From the Parameter Editor menu, select Generate > Generate Testbench System.
    2. Specify the testbench generation options and click Generate.
    3. Click Close.
  7. To generate an HDL instantiation template that you can copy and paste into your text editor:
    1. From the Parameter Editor menu, select Generate > Show Instantiation Template.
    2. Select the HDL Language.
      The code template appears in the Example HDL box.
    3. Click Copy and then click Close.
After generating and instantiating your IP variant, assign appropriate pins to connect the ports.

Section Content
Intel FPGA IP Generation Output

Level Two Title