Visible to Intel only — GUID: sam1395329955677
Ixiasoft
1. Intel FPGA Integer Arithmetic IP Cores
2. LPM_COUNTER (Counter) IP Core
3. LPM_DIVIDE (Divider) Intel FPGA IP Core
4. LPM_MULT (Multiplier) IP Core
5. LPM_ADD_SUB (Adder/Subtractor)
6. LPM_COMPARE (Comparator)
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core
8. Intel FPGA Multiply Adder IP Core
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core
11. ALTMULT_ADD (Multiply-Adder) IP Core
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core
13. ALTSQRT (Integer Square Root) IP Core
14. PARALLEL_ADD (Parallel Adder) IP Core
15. Integer Arithmetic IP Cores User Guide Document Archives
16. Document Revision History for Intel FPGA Integer Arithmetic IP Cores User Guide
7.1. ALTECC Encoder Features
7.2. Verilog HDL Prototype (ALTECC_ENCODER)
7.3. Verilog HDL Prototype (ALTECC_DECODER)
7.4. VHDL Component Declaration (ALTECC_ENCODER)
7.5. VHDL Component Declaration (ALTECC_DECODER)
7.6. VHDL LIBRARY_USE Declaration
7.7. Encoder Ports
7.8. Decoder Ports
7.9. Encoder Parameters
7.10. Decoder Parameters
Visible to Intel only — GUID: sam1395329955677
Ixiasoft
8.1.3. Pre-load Constant
The pre-load constant controls the accumulator operand and complements the accumulator feedback. The valid LOADCONST_VALUE ranges from 0–64. The constant value is equal to 2 N , where N = LOADCONST_VALUE. When the LOADCONST_VALUE is set to 64, the constant value is equal to 0. This function can be used as biased rounding.
The following figure shows the pre-load constant implementation.
Figure 19. Pre-load Constant
Refer to the following IP cores for other multiplier implementations: