Bare Metal User Guide

Download PDF
ID 683211
Date 11/30/2015
Public
Document Table of Contents
Document Table of Contents x
1. Bare Metal User Guide
1. Bare Metal User Guide x
1.1. Introduction 1.2. Bare Metal Overview 1.3. Prerequisites for the Bare Metal Development Environment 1.4. Bare Metal Compiler 1.5. Bare Metal Development Flow 1.6. Using DS-5 AE to Create and Manage Bare Metal Projects 1.7. Importing, Building and Debugging in a Make-Based Example 1.8. DS-5 ARM HWLIBs Project Derived from Make-Based Project 1.9. Minimal Preloader 1.10. Appendix: Troubleshooting
1.6. Using DS-5 AE to Create and Manage Bare Metal Projects x
1.6.1. Simple Bare Metal Project Using On-Chip-RAM 1.6.2. Preloader 1.6.3. Modify Project to Run from SDRAM Instead of On-Chip RAM 1.6.4. Alternative Way to Create a Simple Bare Metal Project Running from On-Chip-RAM
1.6.1. Simple Bare Metal Project Using On-Chip-RAM x
1.6.1.1. Create Project 1.6.1.2. Create New Scatter File to Locate the Bare Metal Application in the OCRAM 1.6.1.3. Build and Debug the Project
1.6.2. Preloader x
1.6.2.1. Loading and Running the Default Preloader 1.6.2.2. Importing Preloader into a DS-5 Project
1.6.2.2. Importing Preloader into a DS-5 Project x
1.6.2.2.1. Import Preloader 1.6.2.2.2. Create New Debug Configurations and Debug Preloader 1.6.2.2.3. Download and Debug 'Hello World' Example in the SDRAM Memory
1.6.3. Modify Project to Run from SDRAM Instead of On-Chip RAM x
1.6.3.1. Create a New Scatter File to Locate the Bare Metal Application in the SDRAM
1.7. Importing, Building and Debugging in a Make-Based Example x
1.7.1. Import the Project 1.7.2. Build the Project 1.7.3. Debug the Project
1.8. DS-5 ARM HWLIBs Project Derived from Make-Based Project x
1.8.1. Create Project 1.8.2. Build Project 1.8.3. Run/Debug Project
1.8.1. Create Project x
1.8.1.1. Copy Files 1.8.1.2. Configure Build Settings
1.8.1.2. Configure Build Settings x
1.8.1.2.1. ARM C Compiler Settings
1.8.1.2.1. ARM C Compiler Settings x
1.8.1.2.1.1. ARM Assembler Settings 1.8.1.2.1.2. ARM Linker Settings
1.8.3. Run/Debug Project x
1.8.3.1. Create a Debug Configuration
1.9. Minimal Preloader x
1.9.1. Minimal Preloader Example Project
1.10. Appendix: Troubleshooting x
1.10.1. Debug Cable Does Not Work 1.10.2. FPGA Is Not Programmed Successfully 1.10.3. Temporary Directories not Writable
1. Bare Metal User Guide

1.7. Importing, Building and Debugging in a Make-Based Example

The import, build and debug of the Altera SoC EDS Make-based example covers importing and debugging an example included with the Altera SoC EDS tools into the ARM DS-5 environment.

The Make-based example that is included in the following sections, loads the Golden Hardware Reference Design (GHRD) FPGA image on Cyclone V SoC Development Kit and blinks LEDs to test that the HPS can control peripherals in the FPGA fabric. This example compiles using the ARM compiler.


Section Content
Import the Project
Build the Project
Debug the Project

Level Two Title