Intel® Fortran Compiler Classic and Intel® Fortran Compiler Developer Guide and Reference

ID 767251
Date 3/22/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

List of Runtime Error Messages

This section lists some of the errors processed by the Intel® Fortran runtime library (RTL).

NOTE:

To see a more complete list of runtime errors, see file ifcore_msg.msg, which is located in the libraries part of your kit.

For each error shown in the below table of example messages, you will see the error number, the severity code, error message text, and condition symbol name. Some messages also provide more details about the error.

To define the condition symbol values (PARAMETER statements) in your program, include the following file:

for_iosdef.for

As described in the table, the severity of the message determines which of the following occurs:

  • with info and warning, program execution continues

  • with error, the results may be incorrect

  • with severe, program execution stops (unless a recovery method is specified)

In the last case, to prevent program termination, you must include either an appropriate I/O error-handling specifier and recompile or, for certain errors, change the default action of a signal before you run the program again.

In the following table of example messages, the first column lists error numbers returned to IOSTAT variables when an I/O error is detected.

The first line of the second column provides the message as it is displayed (following forrtl:), including the severity level, message number, and the message text. The following lines of the second column contain the status condition symbol (such as FOR$IOS_INCRECTYP) and sometimes an explanation of the message.

In these messages, words in quotes represent variables. For example, "number" indicates a numeric variable, and "string" indicates a character string variable.

Number

Severity Level, Number, and Message Text; Condition Symbol and Explanation

11

severe (1): Not a Fortran-specific error

FOR$IOS_NOTFORSPE. An error in the user program or in the RTL was not an Intel® Fortran-specific error and was not reportable through any other Intel® Fortran runtime messages.

2

severe (2): not implemented

FOR$IOS_NOTIMP.

3

warning (3): ignored requested disposition

FOR$IOS_IGNORED.

4

warning (4): ignored requested disposition, file not deleted

FOR$IOS_IGNNOTDEL.

5

warning (5): requested disposition modified, file not deleted, unit "number", file "string"

FOR$IOS_REQDISMOD.

8

severe (8): Internal consistency check failure

FOR$IOS_BUG_CHECK. Internal error. Please check that the program is correct. Recompile if an error existed in the program. If this error persists, submit a problem report.

9

severe (9): Permission to access file denied

FOR$IOS_PERACCFIL. Check the permissions of the specified file and whether the network device is mapped and available. Make sure the correct file and device was being accessed. Change the protection, specific file, or process used before rerunning the program.

10

severe (10): Cannot overwrite existing file

FOR$IOS_CANOVEEXI. Specified file xxx already exists when OPEN statement specified STATUS='NEW' (create new file) using I/O unit x. Make sure correct file name, directory path, unit, and so forth were specified in the source program. Decide whether to:

  • Rename or remove the existing file before rerunning the program.

  • Modify the source file to specify different file specification, I/O unit, or OPEN statement STATUS.

111

info (11): Unit not connected

FOR$IOS_UNINOTCON. The specified unit was not open at the time of the attempted I/O operation. Check if correct unit number was specified. If appropriate, use an OPEN statement to explicitly open the file (connect the file to the unit number).

14

info (14): SOURCE length "number" does not equal variable length "number"

FOR$IOS_SOURCELENERR.

17

severe (17): Syntax error in NAMELIST input

FOR$IOS_SYNERRNAM. The syntax of input to a namelist-directed READ statement was incorrect.

18

severe (18): Too many values for NAMELIST variable

FOR$IOS_TOOMANVAL. An attempt was made to assign too many values to a variable during a namelist READ statement.

19

severe (19): Invalid reference to variable in NAMELIST input

FOR$IOS_INVREFVAR. One of the following conditions occurred:

  • The variable was not a member of the namelist group.

  • An attempt was made to subscript a scalar variable.

  • A subscript of the array variable was out-of-bounds.

  • An array variable was specified with too many or too few subscripts for the variable.

  • An attempt was made to specify a substring of a non-character variable or array name.

  • A substring specifier of the character variable was out-of-bounds.

  • A subscript or substring specifier of the variable was not an integer constant.

  • An attempt was made to specify a substring by using an unsubscripted array variable.

20

severe (20): REWIND error

FOR$IOS_REWERR. One of the following conditions occurred:

  • The file was not a sequential file.

  • The file was not opened for sequential or append access.

  • The Intel® Fortran RTL I/O system detected an error condition during execution of a REWIND statement.

21

severe (21): Duplicate file specifications

FOR$IOS_DUPFILSPE. Multiple attempts were made to specify file attributes without an intervening close operation. A DEFINE FILE statement was followed by another DEFINE FILE statement or an OPEN statement.

22

severe (22): Input record too long

FOR$IOS_INPRECTOO. A record was read that exceeded the explicit or default record length specified when the file was opened. To read the file, use an OPEN statement with a RECL=VALUE (record length) of the appropriate size.

23

severe (23): BACKSPACE error

FOR$IOS_BACERR. The Intel® Fortran RTL I/O system detected an error condition during execution of a BACKSPACE statement.

241

severe (24): End-of-file during read

FOR$IOS_ENDDURREA. One of the following conditions occurred:

  • An Intel® Fortran RTL I/O system end-of-file condition was encountered during execution of a READ statement that did not contain an END, ERR, or IOSTAT specification.

  • An end-of-file record written by the ENDFILE statement was encountered during execution of a READ statement that did not contain an END, ERR, or IOSTAT specification.

  • An attempt was made to read past the end of an internal file character string or array during execution of a READ statement that did not contain an END, ERR, or IOSTAT specification.

This error is returned by END and ERRSNS.

25

severe (25): Record number outside range

FOR$IOS_RECNUMOUT. A direct access READ, WRITE, or FIND statement specified a record number outside the range specified when the file was opened.

26

severe (26): OPEN or DEFINE FILE required

FOR$IOS_OPEDEFREQ. A direct access READ, WRITE, or FIND statement was attempted for a file when no prior DEFINE FILE or OPEN statement with ACCESS='DIRECT' was performed for that file.

27

severe (27): Too many records in I/O statement

FOR$IOS_TOOMANREC. An attempt was made to do one of the following:

  • Read or write more than one record with an ENCODE or DECODE statement.

  • Write more records than existed.

28

severe (28): CLOSE error

FOR$IOS_CLOERR. An error condition was detected by the Intel® Fortran RTL I/O system during execution of a CLOSE statement.

29

severe (29): File not found

FOR$IOS_FILNOTFOU. A file with the specified name could not be found during an OPEN operation.

30

severe (30): Open failure

FOR$IOS_OPEFAI. An error was detected by the Intel® Fortran RTL I/O system while attempting to open a file in an OPEN, INQUIRE, or other I/O statement. This message is issued when the error condition is not one of the more common conditions for which specific error messages are provided. It can occur when an OPEN operation was attempted for one of the following:

  • Segmented file that was not on a disk or a raw magnetic tape

  • Standard I/O file that had been closed

31

severe (31): Mixed file access modes

FOR$IOS_MIXFILACC. An attempt was made to use any of the following combinations:

  • Formatted and unformatted operations on the same unit

  • An invalid combination of access modes on a unit, such as direct and sequential

  • An Intel® Fortran RTL I/O statement on a logical unit that was opened by a program coded in another language

32

severe (32): Invalid logical unit number

FOR$IOS_INVLOGUNI. A logical unit number greater than 2,147,483,647 or less than zero was used in an I/O statement.

33

severe (33): ENDFILE error

FOR$IOS_ENDFILERR. One of the following conditions occurred:

  • The file was not a sequential organization file with variable-length records.

  • The file was not opened for sequential, append, or direct access.

  • An unformatted file did not contain segmented records.

  • The Intel® Fortran RTL I/O system detected an error during execution of an ENDFILE statement.

34

severe (34): Unit already open

FOR$IOS_UNIALROPE. A DEFINE FILE statement specified a logical unit that was already opened.

35

severe (35): Segmented record format error

FOR$IOS_SEGRECFOR. An invalid segmented record control data word was detected in an unformatted sequential file. The file was probably either created with RECORDTYPE='FIXED' or 'VARIABLE' in effect, or was created by a program written in a language other than Fortran or Standard Fortran.

36

severe (36): Attempt to access non-existent record

FOR$IOS_ATTACCNON. A direct-access READ or FIND statement attempted to access beyond the end of a relative file (or a sequential file on disk with fixed-length records) or access a record that was previously deleted from a relative file.

37

severe (37): Inconsistent record length

FOR$IOS_INCRECLEN. An attempt was made to open a direct access file without specifying a record length.

38

severe (38): Error during write

FOR$IOS_ERRDURWRI. The Intel® Fortran RTL I/O system detected an error condition during execution of a WRITE statement.

39

severe (39): Error during read

FOR$IOS_ERRDURREA. The Intel® Fortran RTL I/O system detected an error condition during execution of a READ statement.

40

severe (40): Recursive I/O operation

FOR$IOS_RECIO_OPE. While processing an I/O statement for a logical unit, another I/O operation on the same logical unit was attempted, such as a function subprogram that performs I/O to the same logical unit that was referenced in an expression in an I/O list or variable format expression.

41

severe (41): Insufficient virtual memory

FOR$IOS_INSVIRMEM. The Intel® Fortran RTL attempted to exceed its available virtual memory while dynamically allocating space. To overcome this problem, investigate increasing the data limit. Before you try to run this program again, wait until the new system resources take effect.

NOTE:

This error can be returned by STAT in an ALLOCATE or a DEALLOCATE statement.

42

severe (42): No such device

FOR$IOS_NO_SUCDEV. A pathname included an invalid or unknown device name when an OPEN operation was attempted.

43

severe (43): File name specification error

FOR$IOS_FILNAMSPE. A pathname or file name given to an OPEN or INQUIRE statement was not acceptable to the Intel® Fortran RTL I/O system.

44

severe (44): Inconsistent record type

FOR$IOS_INCRECTYP. The RECORDTYPE value in an OPEN statement did not match the record type attribute of the existing file that was opened.

45

severe (45): Keyword value error in OPEN statement

FOR$IOS_KEYVALERR. An improper value was specified for an OPEN or CLOSE statement specifier requiring a value.

46

severe (46): Inconsistent OPEN/CLOSE parameters

FOR$IOS_INCOPECLO. Specifications in an OPEN or CLOSE statement were inconsistent. Some invalid combinations follow:

  • READONLY or ACTION='READ' with STATUS='NEW' or STATUS='SCRATCH'

  • READONLY with STATUS='REPLACE', ACTION='WRITE', or ACTION='READWRITE'

  • ACCESS='APPEND' with READONLY, ACTION='READ', STATUS='NEW', or STATUS='SCRATCH'

  • DISPOSE='SAVE', 'PRINT', or 'SUBMIT' with STATUS='SCRATCH'

  • DISPOSE='DELETE' with READONLY

  • CLOSE statement STATUS='DELETE' with OPEN statement READONLY

  • ACCESS='DIRECT' with POSITION='APPEND' or 'ASIS'

47

severe (47): Write to READONLY file

FOR$IOS_WRIREAFIL. A write operation was attempted to a file that was declared ACTION='READ' or READONLY in the OPEN statement that is currently in effect.

48

severe (48): Invalid argument to Fortran Runtime Library

FOR$IOS_INVARGFOR. The compiler passed an invalid or improperly coded argument to the Intel® Fortran RTL. This can occur if the compiler is newer than the RTL in use.

49

severe (49): invalid key specification, unit "number", file "string"

FOR$IOS_INVKEYSPE.

50

severe (50): inconsistent key change or duplicate key, unit "number", file "string"

FOR$IOS_INCKEYCHG.

51

severe (51): Inconsistent file organization

FOR$IOS_INCFILORG. The file organization specified in an OPEN statement did not match the organization of the existing file.

52

severe (52): specified record locked, unit "number", file "string"

FOR$IOS_SPERECLOC.

53

severe (53): No current record, unit "number", file "string"

FOR$IOS_NO_CURREC. Attempted to execute a REWRITE statement to rewrite a record when the current record was undefined. To define the current record, execute a successful READ statement. You can optionally perform an INQUIRE statement on the logical unit after the READ statement and before the REWRITE statement. No other operations on the logical unit may be performed between the READ and REWRITE statements.

54

severe (54): REWRITE error, unit "number", file "string"

FOR$IOS_REWRITERR.

55

severe (55): DELETE error, unit "number", file "string"

FOR$IOS_DELERR. An error condition was detected by the Intel® Fortran RTL I/O system during execution of a DELETE statement.

56

severe (56): UNLOCK error, unit "number", file "string"

FOR$IOS_UNLERR.

57

severe (57): FIND error, unit "number", file "string"

FOR$IOS_FINERR. The Intel® Fortran RTL I/O system detected an error condition during execution of a FIND statement.

581

info (58): Format syntax error at or near xx

FOR$IOS_FMTSYN. Check the statement containing xx, a character substring from the format string, for a format syntax error. For more information, see the FORMAT statement.

59

severe (59): List-directed I/O syntax error

FOR$IOS_LISIO_SYN. The data in a list-directed input record had an invalid format, or the type of the constant was incompatible with the corresponding variable. The value of the variable was unchanged.

NOTE:

Note: The ERR transfer is taken after completion of the I/O statement for error number 59. The resulting file status and record position are the same as if no error had occurred. However, other I/O errors take the ERR transfer as soon as the error is detected, so file status and record position are undefined.

60

severe (60): Infinite format loop

FOR$IOS_INFFORLOO. The format associated with an I/O statement that included an I/O list had no field descriptors to use in transferring those values.

61

severe or info(61): Format/variable-type mismatch

FOR$IOS_FORVARMIS. An attempt was made either to read or write a real variable with an integer field descriptor (I, L, O, Z, B), or to read or write an integer or logical variable with a real field descriptor (D, E, or F). To suppress this error message, see the description of check[:]noformat.

NOTE:

Note: The severity depends on the check[:]keywords option used during the compilation command. The ERR transfer is taken after completion of the I/O statement for error numbers 61, 63, 64, and 68. The resulting file status and record position are the same as if no error had occurred. However, other I/O errors take the ERR transfer as soon as the error is detected, so file status and record position are undefined.

62

severe (62): Syntax error in format

FOR$IOS_SYNERRFOR. A syntax error was encountered while the RTL was processing a format stored in an array or character variable.

63

error or info(63): Output conversion error

FOR$IOS_OUTCONERR. During a formatted output operation, the value of a particular number could not be output in the specified field length without loss of significant digits. When this situation is encountered, the overflowed field is filled with asterisks to indicate the error in the output record. If no ERR address has been defined for this error, the program continues after the error message is displayed. To suppress this error message, see the description of check[:]nooutput_conversion.

NOTE:

Note: The severity depends on the check[:]keywords option used during the compilation command. The ERR transfer is taken after completion of the I/O statement for error numbers 61, 63, 64, and 68. The resulting file status and record position are the same as if no error had occurred. However, other I/O errors take the ERR transfer as soon as the error is detected, so file status and record position are undefined.

64

severe (64): Input conversion error

FOR$IOS_INPCONERR. During a formatted input operation, an invalid character was detected in an input field, or the input value overflowed the range representable in the input variable. The value of the variable was set to zero.

NOTE:

The ERR transfer is taken after completion of the I/O statement for error numbers 61, 63, 64, and 68. The resulting file status and record position are the same as if no error had occurred. However, other I/O errors take the ERR transfer as soon as the error is detected, so file status and record position are undefined.

65

error (65): Floating invalid

FOR$IOS_FLTINV. During an arithmetic operation, the floating-point values used in a calculation were invalid for the type of operation requested or invalid exceptional values. For example, the error can occur if you request a log of the floating-point values 0.0 or a negative number. For certain arithmetic expressions, specifying the check[:]nopower option can suppress this message.

66

severe (66): Output statement overflows record

FOR$IOS_OUTSTAOVE. An output statement attempted to transfer more data than would fit in the maximum record size.

67

severe (67): Input statement requires too much data

FOR$IOS_INPSTAREQ. Attempted to read more data than exists in a record with an unformatted READ statement or with a formatted sequential READ statement from a file opened with a PAD='NO' specifier.

68

severe (68): Variable format expression value error

FOR$IOS_VFEVALERR. The value of a variable format expression was not within the range acceptable for its intended use; for example, a field width was less than or equal to zero. A value of 1 was assumed, except for a P edit descriptor, for which a value of zero was assumed.

NOTE:

The ERR transfer is taken after completion of the I/O statement for error numbers 61, 63, 64, and 68. The resulting file status and record position are the same as if no error had occurred. However, other I/O errors take the ERR transfer as soon as the error is detected, so file status and record position are undefined.

691

error (69): Process interrupted (SIGINT)

FOR$IOS_SIGINT. The process received the signal SIGINT. Determine source of this interrupt signal (described in signal(3)).

701

severe (70): Integer overflow

FOR$IOS_INTOVF. During an arithmetic operation, an integer value exceeded byte, word, or longword range. The result of the operation was the correct low-order part. Consider specifying a larger integer data size (modify source program or, for an INTEGER declaration, possibly use the integer-size[:]size option).

711

severe (71): Integer divide by zero

FOR$IOS_INTDIV. During an integer arithmetic operation, an attempt was made to divide by zero. The result of the operation was set to the dividend, which is equivalent to division by 1.

721

error (72): Floating overflow

FOR$IOS_FLTOVF. During an arithmetic operation, a floating-point value exceeded the largest representable value for that data type. See Data Representation for ranges of the various data types.

731

error (73): Floating divide by zero

FOR$IOS_FLTDIV. During a floating-point arithmetic operation, an attempt was made to divide by zero.

741

error (74): Floating underflow

FOR$IOS_FLTUND. During an arithmetic operation, a floating-point value became less than the smallest finite value for that data type. Depending on the values of the fpe[:]n option, the underflowed result was either set to zero or allowed to gradually underflow. See the Data Representation for ranges of the various data types.

751

error (75): Floating point exception

FOR$IOS_SIGFPE. A floating-point exception occurred. Possible causes include:

  • Division by zero.

  • Overflow.

  • An invalid operation, such as subtraction of infinite values, multiplication of zero by infinity without signs), division of zero by zero or infinity by infinity.

  • Conversion of floating-point to fixed-point format when an overflow prevents conversion.

761

error (76): IOT trap signal

FOR$IOS_SIGIOT. Core dump file created. Examine core dump for possible cause of this IOT signal.

771

severe (77): Subscript out of range

FOR$IOS_SUBRNG. An array reference was detected outside the declared array bounds.

781

error (78): Process killed

FOR$IOS_SIGTERM. The process received a signal requesting termination of this process. Determine the source of this software termination signal.

791

error (79): Process quit

FOR$IOS_SIGQUIT. The process received a signal requesting termination of itself. Determine the source of this quit signal.

801

severe (80): wrong number of arguments

FOR$IOS_WRONUMARG.

811

severe (81): invalid argument to math library

FOR$IOS_INVARGMAT.

821

severe (82): undefined exponentiation

FOR$IOS_UNDEXP.

831

severe (83): logarithm of zero or negative value

FOR$IOS_LOGZERNEG.

841

severe (84): square root of negative value

FOR$IOS_SQUROONEG.

851

info (85): output conversion overflows field, unit "number", file "string"

FOR$IOS_OUTCONOVE.

871

severe (87): significance lost in math library

FOR$IOS_SIGLOSMAT.

881

severe (88): floating overflow in math library

FOR$IOS_FLOOVEMAT.

89 1

error (89): floating underflow in math library

FOR$IOS_FLOUNDMAT.

901

info (90): INQUIRE of internal unit-number is always an error (NOTE: unit identifies a file)

FOR$IOS_IOSTAT_INTERNAL. The file name specified for an INQUIRE statement is an internal unit-number.

911

info (91): INQUIRE of internal unit-number is always an error (NOTE: unit does not identify a file)

FOR$IOS_IOSTAT_INTERNAL_UNIT. The unit number specified for an INQUIRE statement is an internal unit-number.

93

severe (93): adjustable array dimension error

FOR$IOS_ADJARRDIM.

94

severe (94): invalid key match specifier for key direction, unit "number", file "string"

FOR$IOS_INVMATKEY .

951

info (95): Floating-point conversion failed

FOR$IOS_FLOCONFAI. The attempted unformatted read or write of non-native floating-point data failed because the floating-point value:

  • Exceeded the allowable maximum value for the equivalent native format and was set equal to infinity (plus or minus).

  • Was infinity (plus or minus) and was set to infinity (plus or minus).

  • Was invalid and was set to not a number (NaN).

Very small numbers are set to zero (0). This error could be caused by the specified non-native floating-point format not matching the floating-point format found in the specified file. Check the following:

96

info (96): F_UFMTENDIAN environment variable was ignored:erroneous syntax

FOR$IOS_UFMTENDIAN. Syntax for specifying whether little endian or big endian conversion is performed for a given Fortran unit was incorrect. Even though the program will run, the results might not be correct if you do not change the value of F_UFMTENDIAN. For correct syntax, see Environment Variable F_UFMTENDIAN Method.

97

severe (97): write exceeds the record length of the file, unit "number", file "string"

FOR$IOS_WRIEXCEEDRECL.

98

severe (98): cannot allocate memory for the file buffer - out of memory

FOR_S_NOMEMFORIO. This error often occurs during a file I-O operation such as OPEN, READ, or WRITE. Either increase the amount of memory available to the program, or reduce its demand.

99

severe (99): FORT_FMT_RECL environment variable has erroneous syntax

FOR$IOS_INVFMTRECL.

100

severe (100): FORT_UFMT_RECL environment variable has erroneous syntax

FOR$IOS_INVUFMTRECL.

101

severe (101): Asynchronous data transfer statement is not allowed to this unit, unit "number", file "string"

FOR$IOS_AIONOTALLOWED.

102

severe (102): ID value is out of range, unit "number", file "string"

FOR$IOS_IDVALOUT.

103

severe (103): incorrect "string" specifier for connected file, unit "number", file "string"

FOR$IOS_BADSPEC.

104

severe (104): incorrect "XXXXX=" specifier value for connected file

FOR$IOS_BADSPECVAL. The listed specifier value is invalid for the connected file. Possible specifier values are one of the following:

  • ACTION=

  • ASSOCIATEVARIABLE=

  • ASYNCHRONOUS=

  • BUFFERED=

  • DISPOSE=

  • FORM=

  • IOFOCUS=

  • MAXREC=

  • MODE=

  • ORGANIZATION=

  • POSITION=

  • RECL=

  • RECORDTYPE=

  • SHARE=

  • STATUS=

  • TITLE=

105

severe (105): there is no data-edit-descriptor to match a data-item in the I/O list, unit "number", file "string"

FOR$IOS_NODATAEDIT.

106

severe (106): FORT_BLOCKSIZE environment variable has erroneous syntax

FOR_S_INVBLOCKSIZE. Syntax for specifying the default block size value was incorrect. For correct syntax, see Environment Variable FORT_BLOCKSIZE.

107

severe (107): FORT_BUFFERCOUNT environment variable has erroneous syntax

FOR_S_INVBUFRCNT. Syntax for specifying the default buffer count value was incorrect. For correct syntax, see Environment Variable FORT_BUFFERCOUNT.

108

severe (108): Cannot stat file

FOR$IOS_CANSTAFILE. Make sure correct file and unit were specified.

109

info (109): stream data transfer statement is not allowed to an unopened unit

FOR$IOS_SIONOTOPEN. Stream data transfer statement is not allowed to an unopened unit.

110

severe (110): stream data transfer statement is not allowed to this unit, unit "number", file "string"

FOR$IOS_SIONOTALLOWED.

111

severe (111): position number is outside of the valid range, unit "number", file "string"

FOR$IOS_POSNUMOUT.

112

severe (112): RECL= specifier may not be applied to stream access file, unit "number", file "string"

FOR$IOS_STREAMRECL.

113

severe (113): BACKSPACE statement may not be applied to unformatted stream access file, unit "number", file "string"

FOR$IOS_STREAMBCKSPC.

114

severe (114): A keyword was specified that is not allowed with unformatted I/O; unit "number", file "string"

FOR$IOS_KWANDUNFMT.

115

severe (115): keyword value error in a CLOSE statement, unit "number", file "string"

FOR$IOS_KEYVALERRCLOSE.

116

severe (116): keyword value error in an I/O statement, unit "number", file "string"

FOR$IOS_KEYVALERRIO.

117

severe (117): If NEWUNIT appears in OPEN statement either FILE or STATUS (with value SCRATCH) specifier shall appear

FOR$IOS_FILE_OR_SCRATCH.

118

severe (118): The 'RECL=' value in an OPEN statement exceeds the maximum allowed for the file's record type.

FOR$IOS_MAX_FXD_RECL. The 'RECL=' value in an OPEN statement is too large for the file’s record type.

1191

severe (119): The FORT_BUFFERING_THRESHOLD environment variable has erroneous syntax

FOR$ IOS_INVTHRESHOLD. If specified, the FORT_BUFFERING_THRESHOLD environment variable must be an integer value greater than zero and less than 2147483647.

120

severe (120): Operation requires seek ability

FOR$IOS_OPEREQSEE. Attempted an operation on a file that requires the ability to perform seek operations on that file. Make sure the correct unit, directory path, and file were specified.

121

severe (121): Cannot access current working directory

FOR$IOS_CWDERROR. Cannot access the current working directory to open or access a file. One of the following conditions occurred:

  • The directory has been deleted or moved by another task.

  • The getcwd system function failed due to an OS or file-system problem.

122

severe (122): invalid attempt to assign into a pointer that is not associated

FOR$IOS_UNASSOCPTR. Invalid attempt to assign into a pointer that is not associated.

123

severe (123): attempt to assign a scalar to an unallocated allocatable array

FOR$IOS_SCALTOUNALLOC.

1241

severe (124): Invalid command supplied to EXECUTE_COMMAND_LINE

FOR$ IOS_INVCMDECL. The command line passed to the EXECUTE_COMMAND_LINE intrinsic is invalid.

NOTE:

This error can be returned by CMDSTAT in an EXECUTE_COMMAND_LINE statement.

125

severe (125): A derived type variable in this statement requires a DT format specifier because it has a component that is ALLOCATABLE, POINTER, or PRIVATE, unit "number", file "string"

FOR$IOS_DT_REQUIRED.

126

severe (126): A non-advancing READ immediately following a non-advancing WRITE on the same unit number is not allowed, unit "number"

FOR$IOS_NONADV_READ_AFTER_WRITE.

127

severe (127): User Defined I/O procedure returned error <user-iostat, message: '<user-iomsg>'

FOR$IOS_UDIO_CHILD_IOSTAT_IOMSG. A child I/O action has set the IOMSG and IOSTAT shown in this message.

128

info (128): Error stop – program terminated

FOR$IOS_ERROR_STOP. The user program has executed an ERROR STOP statement.

129

info (129): User Defined I/O procedure's IOMSG was truncated to fit IOMSG variable

FOR$IOS_UDIO_IOMSG_TRUNCATED. A child I/O action has set IOMSG and IOSTAT. The result was too large to be held by the parent's IOMSG variable; non-blank text has been truncated.

1381

severe (138): Array index out of bounds

FOR$IOS_BRK_RANGE. An array subscript is outside the dimensioned boundaries of that array. Set the check[:]bounds option and recompile.

1391

severe: (139): Array index out of bounds for index "number"

FOR$IOS_BRK_RANGE2. An array subscript is outside the dimensioned boundaries of that array. Set the check[:]bounds option and recompile.

1401

error (140): Floating inexact

FOR$IOS_FLTINE. A floating-point arithmetic or conversion operation gave a result that differs from the mathematically exact result. This trap is reported if the rounded result of an IEEE operation is not exact.

1441

severe (144): Reserved operand

FOR$IOS_ROPRAND. The Intel® Fortran RTL encountered a reserved operand while executing your program. Please report the problem to Intel.

1451

severe (145): Assertion error

FOR$IOS_ASSERTERR. The Intel® Fortran RTL encountered an assertion error. Please report the problem to Intel.

1461

severe (146): Null pointer error

FOR$IOS_NULPTRERR. Attempted to use a pointer that does not contain an address. Modify the source program, recompile, and relink.

1471

severe (147): Stack overflow

FOR$IOS_STKOVF. The Intel® Fortran RTL encountered a stack overflow while executing your program.

1481

severe (148): String length error

FOR$IOS_STRLENERR. During a string operation, an integer value appears in a context where the value of the integer is outside the permissible string length range. Set the check[:]bounds option and recompile.

1491

severe (149): Substring error

FOR$IOS_SUBSTRERR. An array subscript is outside the dimensioned boundaries of an array. Set the check[:]bounds option and recompile.

1501

severe (150): Range error

FOR$IOS_RANGEERR. An integer value appears in a context where the value of the integer is outside the permissible range.

1511

severe (151): Allocatable array is already allocated

FOR$IOS_INVREALLOC. An allocatable array must not already be allocated when you attempt to allocate it. You must deallocate the array before it can again be allocated.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

1521

severe (152): Unresolved contention for Intel Fortran RTL global resource

FOR$IOS_RESACQFAI. Failed to acquire an Intel® Fortran RTL global resource for a reentrant routine. For a multithreaded program, the requested global resource is held by a different thread in your program. For a program using asynchronous handlers, the requested global resource is held by the calling part of the program (such as main program) and your asynchronous handler attempted to acquire the same global resource.

1531

severe (153): Allocatable array or pointer is not allocated

FOR$IOS_INVDEALLOC. A Standard Fortran allocatable array or pointer must already be allocated when you attempt to deallocate it. You must allocate the array or pointer before it can again be deallocated.

NOTE:

This error can be returned by STAT in an DEALLOCATE statement.

1541

severe (154): Array index out of bounds

FOR$IOS_RANGE. An array subscript is outside the dimensioned boundaries of that array. Set the check[:]bounds option and recompile.

1551

severe (155): Array index out of bounds for index "number"

FOR$IOS_RANGE2. An array subscript is outside the dimensioned boundaries of that array. Set the check[:]bounds option and recompile.

1561

severe (156): GENTRAP code = hex dec

FOR$IOS_DEF_GENTRAP. The Intel® Fortran RTL has detected an unknown GENTRAP code. The cause is most likely a software problem due to memory corruption, or software signaling an exception with an incorrect exception code. Try setting the check[:]bounds option and recompile to see if that finds the problem.

1571

severe (157): Program Exception - access violation

FOR$IOS_ACCVIO. The program tried to read from or write to a virtual address for which it does not have the appropriate access. Try setting the check[:]bounds option and recompile to see if the problem is an out-of-bounds memory reference or a argument mismatch that causes data to be treated as an address.

Other possible causes of this error include:

  • Mismatches in C vs. STDCALL calling mechanisms, causing the stack to become corrupted.

  • References to unallocated pointers.

  • Attempting to access a protected (for example, read-only) address.

1581

severe (158): Program Exception - datatype misalignment

FOR$IOS_DTYPE_MISALIGN. The Intel® Fortran RTL has detected data that is not aligned on a natural boundary for the data type specified. For example, a REAL(8) data item aligned on natural boundaries has an address that is a multiple of 8. To ensure naturally aligned data, use the align option.

This is an operating system error. See your operating system documentation for more information.

1591

severe (159): Program Exception - breakpoint

FOR$IOS_PGM_BPT. The Intel® Fortran RTL has encountered a breakpoint in the program.

This is an operating system error. See your operating system documentation for more information.

1601

severe (160): Program Exception - single step

FOR$IOS_PGM_SS. A trace trap or other single-instruction mechanism has signaled that one instruction has been executed.

This is an operating system error. See your operating system documentation for more information.

1611

severe (161): Program Exception - array bounds exceeded

FOR$IOS_PGM_BOUNDS. The program tried to access an array element that is outside the specified boundaries of the array. Set the check[:]bounds option and recompile.

1621

severe (162): Program Exception - denormal floating-point operand

FOR$IOS_PGM_DENORM. A floating-point arithmetic or conversion operation has a subnormalized number as an operand. A subnormalized number is smaller than the lowest value in the normal range for the data type specified. See Data Representation for ranges for floating-point types.

Either locate and correct the source code causing the subnormalized value or, if a subnormalized value is acceptable, specify a different value for the fpe compiler option to allow program continuation.

1631

severe (163): Program Exception - floating stack check

FOR$IOS_PGM_FLTSTK. During a floating-point operation, the floating-point register stack on systems using IA-32 architecture overflowed or underflowed. This is a fatal exception. The most likely cause is calling a REAL function as if it were an INTEGER function or subroutine, or calling an INTEGER function or subroutine as if it were a REAL function.

Carefully check that the calling code and routine being called agree as to how the routine is declared. If you are unable to resolve the issue, please send a problem report with an example to Intel.

1641

severe (164): Program Exception - integer divide by zero

FOR$IOS_PGM_INTDIV. During an integer arithmetic operation, an attempt was made to divide by zero. Locate and correct the source code causing the integer divide by zero.

1651

severe (165): Program Exception - integer overflow

FOR$IOS_PGM_INTOVF. During an arithmetic operation, an integer value exceeded the largest representable value for that data type. See Data Representation for ranges for INTEGER types.

1661

severe (166): Program Exception - privileged instruction

FOR$IOS_PGM_PRIVINST. The program tried to execute an instruction whose operation is not allowed in the current machine mode.

This is an operating system error. See your operating system documentation for more information.

1671

severe (167): Program Exception - in page error

FOR$IOS_PGM_INPGERR. The program tried to access a page that was not present, so the system was unable to load the page. For example, this error might occur if a network connection was lost while trying to run a program over the network.

This is an operating system error. See your operating system documentation for more information.

1681

severe (168): Program Exception - illegal instruction

FOR$IOS_PGM_ILLINST. The program tried to execute an invalid instruction.

This is an operating system error. See your operating system documentation for more information.

1691

severe (169): Program Exception - noncontinuable exception

FOR$IOS_PGM_NOCONTEXCP. The program tried to continue execution after a noncontinuable exception occurred.

This is an operating system error. See your operating system documentation for more information.

1701

severe (170): Program Exception - stack overflow

FOR$IOS_PGM_STKOVF. The Intel® Fortran RTL has detected a stack overflow while executing your program. See your Release Notes for information on how to increase stack size.

1711

severe (171): Program Exception - invalid disposition

FOR$IOS_PGM_INVDISP. An exception handler returned an invalid disposition to the exception dispatcher. Programmers using a high-level language should never encounter this exception.

This is an operating system error. See your operating system documentation for more information.

1721

severe (172): Program Exception - exception code = hex dec

FOR$IOS_PGM_EXCP_CODE. The Intel® Fortran RTL has detected an unknown exception code.

This is an operating system error. See your operating system documentation for more information.

1731

severe (173): A pointer passed to DEALLOCATE points to an array that cannot be deallocated

FOR$IOS_INVDEALLOC2. A pointer that was passed to DEALLOCATE pointed to an explicit array, an array slice, or some other type of memory that could not be deallocated in a DEALLOCATE statement. Only whole arrays previous allocated with an ALLOCATE statement may be validly passed to DEALLOCATE.

NOTE:

This error can be returned by STAT in a DEALLOCATE statement.

1741

severe (174): SIGSEGV, message-text

FOR$IOS_SIGSEGV. One of two possible messages occurs for this error number:

  • severe (174): SIGSEGV, segmentation fault occurred

    This message indicates that the program attempted an invalid memory reference. Check the program for possible errors.

  • severe (174): SIGSEGV, possible program stack overflow occurred

    The following explanatory text also appears:

    Program requirements exceed current stacksize resource limit.

1751

severe (175): DATE argument to DATE_AND_TIME is too short (LEN=n), required LEN=8

FOR$IOS_SHORTDATEARG. The number of characters associated with the DATE argument to the DATE_AND_TIME intrinsic was shorter than the required length. You must increase the number of characters passed in for this argument to be at least eight characters in length. Verify that the TIME and ZONE arguments also meet their minimum lengths.

1761

severe (176): TIME argument to DATE_AND_TIME is too short (LEN=n), required LEN=10

FOR$IOS_SHORTTIMEARG. The number of characters associated with the TIME argument to the DATE_AND_TIME intrinsic was shorter than the required length. You must increase the number of characters passed in for this argument to be at least ten characters in length. Verify that the DATE and ZONE arguments also meet their minimum lengths.

1771

severe (177): ZONE argument to DATE_AND_TIME is too short (LEN=n), required LEN=5

FOR$IOS_SHORTZONEARG. The number of characters associated with the ZONE argument to the DATE_AND_TIME intrinsic was shorter than the required length. You must increase the number of characters passed in for this argument to be at least five characters in length. Verify that the DATE and TIME arguments also meet their minimum lengths.

1781

severe (178): Divide by zero

FOR$IOS_DIV. A floating-point or integer divide-by-zero exception occurred.

1791

severe (179): Cannot allocate array - overflow on array size calculation

FOR$IOS_ARRSIZEOVF. An attempt to dynamically allocate storage for an array failed because the required storage size exceeds addressable memory.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

180

severe (180): SIGBUS, "string"

FOR$IOS_SIGBUSERR. This message is issued when a SIGBUS occurs.

181

error (181): Unlimited-format-item is *(format-item-list). Format-item in list must not be empty

FOR$IOS_STAR_EMPTY.

1821

severe (182): floating invalid - possible uninitialized real/complex variable.

FOR$ IOS_FLTINV_UNINIT. An invalid floating-point operation failed invalid – likely caused by an uninitialized real/complex variable.

183

warning (183): FASTMEM allocation is requested but the libmemkind library is not linked in, so using the default allocator.

FOR$IOS_NOLIBMEMKINDWARN. An allocation requested FASTMEM but the libmemkind library is not linked into the executable, so memory will be allocated from the default memory allocator for that platform.

184

severe (184): FASTMEM allocation is requested but the libmemkind library is not linked into the executable.

FOR$IOS_NOLIBMEMKINDWARN. An allocation request for FASTMEM failed because the libmemkind library is not linked into the executable.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

185

warning (185): FASTMEM allocation is requested but HBW memory is not available, so using the default allocator.

FOR$IOS_NOFASTMEMWARN. An allocation requested FASTMEM but HBW memory is not available on the node, so memory will be allocated from the default memory allocator for that platform.

186

severe (186): FASTMEM allocation is requested but HBW memory is not available on this node.

FOR$IOS_NOLIBMEMKINDWARN. An allocation request for FASTMEM failed because HBW memory is not available on this node.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

188

severe (188): An assignment was made from an object of one size to an object of a different size that cannot be deallocated.

FOR$ IOS_INCOMPATIBLE_SIZES. An assignment was made from an object of one size to an object of a different size that cannot be deallocated.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

189

severe (189): LHS and RHS of an assignment statement have incompatible types.

FOR$ IOS_INCOMPATIBLE_TYPES. The left-hand side (LHS) of an assignment statement is not type compatible with the right-hand side (RHS) of the assignment statement.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

190

severe (190): For allocate(source=), source needs to be allocated.

FOR$ IOS_ALLOC_INVSOURCE. For allocate(source=), if source is a pointer then it should be associated with a target. If it is allocatable, it should be allocated.

NOTE:

This error can be returned by STAT in an ALLOCATE statement.

193

severe (193): Runtime Check Failure. The variable "string" is being used without being defined

FOR$IOS_RTC_UNINIT_USE .

1941

severe (194): Runtime Check Failure. The variable "string" is being used in "string" without being defined.

FOR$IOS_RTC_UNINIT_USE_SRC. The named variable in the named source file is being used without first being initialized.

195

severe (195): An allocatable coarray cannot be allocated by an assignment statement

FOR$IOS_INVCOALLOC.

200

error (200): program aborting due to "string" event

FOR$IOS_PROABODUE.

201

severe (201): Intel Pentium fdiv flaw detected, please update the processor

FOR$IOS_FLAWEDPENT.

255

info (255): if a UDIO child sets IOMSG, it must set IOSTAT non-zero, unit "number", file "string"

FOR$IOS_CHILDSTATMSG.

256

severe (256): Unformatted I/O to unit open for formatted transfers

FOR$IOS_UNFIO_FMT. Attempted unformatted I/O to a unit where the OPEN statement (FORM specifier) indicated the file was formatted. Check that the correct unit (file) was specified. If the FORM specifier was not present in the OPEN statement and the file contains unformatted data, specify FORM='UNFORMATTED' in the OPEN statement. Otherwise, if appropriate, use formatted I/O (such as list-directed or namelist I/O).

257

severe (257): Formatted I/O to unit open for unformatted transfers

FOR$IOS_FMTIO_UNF. Attempted formatted I/O (such as list-directed or namelist I/O) to a unit where the OPEN statement indicated the file was unformatted (FORM specifier). Check that the correct unit (file) was specified. If the FORM specifier was not present in the OPEN statement and the file contains formatted data, specify FORM='FORMATTED' in the OPEN statement. Otherwise, if appropriate, use unformatted I/O.

258

severe (258): direct-access I/O to unit open for keyed access, unit "number", file "string"

FOR$IOS_DIRIO_KEY.

259

severe (259): Sequential-access I/O to unit open for direct access

FOR$IOS_SEQIO_DIR. The OPEN statement for this unit number specified direct access and the I/O statement specifies sequential access. Check the OPEN statement and make sure the I/O statement uses the correct unit number and type of access.

260

severe (260): keyed-access I/O to unit open for direct access, unit "number", file "string"

FOR$IOS_KEYIO_DIR.

261

severe (261): I/O to non-FORTRAN unit

FOR$IOS_IO_NONFOR.

264

severe (264): operation requires file to be on disk or tape

FOR$IOS_OPEREQDIS. Attempted to use a BACKSPACE statement on such devices as a terminal.

265

severe (265): operation requires sequential file organization and access

FOR$IOS_OPEREQSEQ. Attempted to use a BACKSPACE statement on a file whose organization was not sequential or whose access was not sequential. A BACKSPACE statement can only be used for sequential files opened for sequential access.

2661

error (266): Fortran abort routine called

FOR$IOS_PROABOUSE. The program called the abort routine to terminate itself.

2681

severe (268): End of record during read

FOR$IOS_ENDRECDUR. An end-of-record condition was encountered during execution of a non-advancing I/O READ statement that did not specify the EOR branch specifier.

269

severe (269): Another process has this file locked for shared/exclusive use, unit "number", file "string"

FOR$IOS_SHAREDCONFLICT.

270

severe (270): A SHARE= lock request in an OPEN statement is incompatible with a [NO]SHARED specifier and/or the file's open mode, unit "number", file "string"

FOR$IOS_INVALIDLOCKREQUEST.

271

severe (271): a UDIO child routine may not use POS= or REC=, unit "number", file "string"

FOR$IOS_CHILDNOPOS.

272

severe (272): a UDIO child routine may not set IOSTAT to a negative value other than -1 or -2, unit "number", file "string"

FOR$IOS_CHILDNEGSTAT.

273

info (273): if a UDIO child sets IOSTAT, it must set IOMSG, unit "number", file "string"

FOR$IOS_CHILDMSGSTAT.

274

severe (274): OPEN operation is forbidden while in child IO

FOR$IOS_OPNDURCHILD.

275

severe (275): CLOSE operation is forbidden while in child IO

FOR$IOS_CLSDURCHILD.

276

severe (276): BACKSPACE operation is forbidden while in child IO

FOR$IOS_BACKDURCHILD.

277

severe (277): ENDFILE operation is forbidden while in child IO

FOR$IOS_ENDDURCHILD.

278

severe (278): REWIND operation is forbidden while in child IO

FOR$IOS_REWDURCHILD.

279

info (279): Image "number" detected some other images had stopped

FOR$IOS_SOME_WERE_STOPPED.

280

info (280): Image "number" had a memory error

FOR$IOS_ICAF_ERROR_MEM.

281

info (281): Image "number" got an error from MPI

FOR$IOS_ICAF_ERROR_RMA.

282

info (282): Image "number" detected an invalid operation

FOR$IOS_ICAF_INVALID_OP.

283

info (283): Image "number" detected an overflow

FOR$IOS_OVERFLOW.

284

info (284): Image "number" asked to do an unimplemented action

FOR$IOS_UNIMPLEMENTED.

285

info (285): Image "number" detected some other images had failed

FOR$IOS_SOME_WERE_FAILED.

286

info (286): Image "number" detected some other images had stopped and some had failed

FOR$IOS_STOPPED_AND_FAILED.

287

info (287): Image "number" could not get an MPI communicator to use

FOR$IOS_NO_COMM. This problem with MPI will prevent formation of a TEAM.

288

info (288): Image "number" detected an invalid new team ID

FOR$IOS_BAD_NEW_TEAM_ID. This pertains to the FORM TEAM statement.

289

info (289): Image "number" was given an invalid new image ID

FOR$IOS_BAD_NEW_IMAGE_ID. This pertains to the FORM TEAM statement.

290

info (290): Image "number" was given a duplicate new image ID

FOR$IOS_DUPLICATE_NEW_ID. This pertains to the FORM TEAM statement.

291

info (291): Image "number" detected new image IDs are not dense

FOR$IOS_NEW_IDS_NOT_DENSE. This pertains to the FORM TEAM statement.

292

info (292): Image "number" detected new image IDs did not start at 1

FOR$IOS_NEW_IDS_NOT_FROM_1. This pertains to the FORM TEAM statement.

293

info (293): Image "number" can't change to that team

FOR$IOS_CANT_CHANGE_TO_TEAM. This pertains to the FORM TEAM statement.

294

info (294): Image "number"'s parent team is not active

FOR$IOS_ICAF_PARENT_NOT_ACTIVE. This pertains to the FORM TEAM statement. The user tried an operation on an image, but the image's team is not active, so the operation failed.

295

info (295): Image "number" detected that current team is not active

FOR$IOS_CURRENT_NOT_ACTIVE. This pertains to the FORM TEAM statement. The user tried an operation which needs the current team to be active, but it isn't.

2961

info (296): "number" floating inexact traps

FOR$IOS_FLOINEEXC. The total number of floating-point inexact data traps encountered during program execution was number. This summary message appears at program completion.

2971

info (297): "number" floating invalid traps

FOR$IOS_FLOINVEXC. The total number of floating-point invalid data traps encountered during program execution was number. This summary message appears at program completion.

2981

info (298): "number" floating overflow traps

FOR$IOS_FLOOVFEXC. The total number of floating-point overflow traps encountered during program execution was number. This summary message appears at program completion.

2991

info (299): "number" floating divide-by-zero traps

FOR$IOS_FLODIV0EXC. The total number of floating-point divide-by-zero traps encountered during program execution was number. This summary message appears at program completion.

3001

info (300): "number" floating underflow traps

FOR$IOS_FLOUNDEXC. The total number of floating-point underflow traps encountered during program execution was number. This summary message appears at program completion.

301

info (301): Image "number" detected that new team is not active

FOR$IOS_ICAF_NEW_TEAM_ACTIVE.

302

info (302): Image "number" detected bad team nesting

FOR$IOS_ICAF_BAD_TEAM_NESTING.

303

info (303): Image "number" was given an bad image ID

FOR$IOS_ICAF_BAD_ID.

304

info (304): Image "number" was given a bad team ID

FOR$IOS_ICAF_BAD_TEAM_ID.

305

info (305): Image "number" had an internal error, invalid team variable

FOR$IOS_ICAF_BAD_TEAM_VAR.

306

info (306): Image "number" could not define the reduction

FOR$IOS_ICAF_REDUCTION_DEF_FAIL. Pertains to user-defined reduction operations.

307

info (307): Image "number" did not recognize that reduction

FOR$IOS_ICAF_UNKNOWN_REDUCTION. Pertains to user-defined reduction operations.

308

info (308): Image "number" detected a bad argument

FOR$IOS_ICAF_ERROR_BAD_ARG.

309

info (309): Image "number" had an internal error

FOR$IOS_ICAF_INTERNAL_ERROR.

310

info (310): Image "number" had a pipe IO error

FOR$IOS_ICAF_ERROR_PIPE.

311

info (311): Image "number" used feature not supported on this architecture

FOR$IOS_ICAF_NOT_SUPPORTED_IA32. Coarray features are not supported on IA-32 architecture for the 2003 Standard or later.

312

info (312): Image "number" had an internal error configuring dynamic memory

FOR$IOS_ICAF_INTERNAL_DYN_CONFIG. Pertains to indirect pointers (one where the pointer is the address of memory on another image).

313

info (313): Image "number" internal error attaching dynamic memory

FOR$IOS_ICAF_ERROR_DYN_ATTACH. Pertains to indirect pointers (one where the pointer is the address of memory on another image).

314

info (314): Image "number" internal error detaching dynamic memory

FOR$IOS_ICAF_ERROR_DYN_DETACH. Pertains to indirect pointers (one where the pointer is the address of memory on another image).

315

info (315): Image "number" used an unknown reduction operator

FOR$IOS_UNKNOWN_REDUCTION_OP.

316

info (316): Image "number" unknown datatype for reduction operator

FOR$IOS_UNKNOWN_FTYPE_REDUCE.

317

info (317): Image "number" non-arithmetic datatype for reduction operator

FOR$IOS_NONARITH_TYPE_REDUCE.

318

info (318): Image "number" (len,root) arguments didn't match image 1's

FOR$IOS_MISMATCHBROADCAST. This pertains to the BROADCAST operation.

319

info (319): Image "number" (len,root, op) arguments didn't match image 1's

FOR$IOS_MISMATCHBROADCAST_OP. This pertains to the BROADCAST operation.

320

error (320): Image "number" ERROR STOP statement is not supported

FOR$IOS_NO_ERROR_STOP.

321

info (321): Image "number" Double initialization of coarray support

FOR$IOS_DOUBLE_INIT.

322

info (322): Environment variable '%s' should be defined to 'YES' or 'NO'

FOR$IOS_ENV_VAR_NEEDS_YES_OR_NO.

323

error (323): Image "number" had internal error in critical region support

FOR$IOS_INTERNAL_ERROR_CRITICAL.

324

error (324): Image "number" could not force unlock of critical region held by failed image

FOR$IOS_FORCE_UNLOCK_FAIL.

325

error (325): Image "number"; can't do this operation on an inactive team

FOR$IOS_TEAM_NOT_ACTIVE.

326

error (326): Image "number"; more sub-teams than images

FOR$IOS_TOO_MANY_SUBTEAMS.

327

error (327): Image "number"; mix of default new ids and specified new ids

FOR$IOS_MIXED_DEFAULT_IDS.

328

error (328): Image "number": may not delete or free active team variable

FOR$IOS_TEAM_ACTIVE_NO_FREE.

329

error (329): Image "number": the specified team does not exist

FOR$IOS_NO_SUCH_TEAM.

330

error (330): Image "number": a failed image means a 'hole' in the new image-ids

FOR$IOS_HOLE_IN_IMAGE_IDS.

331

error (331): Image "number": may only change to a team which is the result of FORM TEAM

FOR$IOS_NOT_FROM_FORM_TEAM.

332

error (332): Image "number": there are no non-failed images for this operation

FOR$IOS_NO_LIVE_IMAGES.

333

error (333): Image "number": team object has wrong version number

FOR$IOS_BAD_TEAM_VERSION.

334

error (334): Image "number": specified invalid team

FOR$IOS_SPECIFY_BAD_TEAM.

335

warning (335): Image "number": the DIM argument "number" to THIS_IMAGE is out-of-range

FOR$IOS_OUT_OF_COBOUNDS.

399

severe (399): Diagnostic message buffer overflow, hex message number was "hex-number"

FOR$IOS_MSGBUFOVF.

450

info (450): forrtl:

FOR$IOS_FORRTL_XXX.

451

info (451): forrtl: info ("number"):

FOR$IOS_FORRTL_INFO.

452

info (452): forrtl: warning ("number"):

FOR$IOS_FORRTL_WARNING.

453

info (453): forrtl: error ("number"):

FOR$IOS_FORRTL_ERROR.

454

info (454): forrtl: severe ("number"):

FOR$IOS_FORRTL_SEVERE.

455

info (455): forrtl

FOR$IOS_FORRTL.

496

warning (496): BACKSPACE is a no-op on a terminal device

FOR$IOS_BACKSPCON.

497

warning (497): EOF is a no-op on a terminal device

FOR$IOS_EOFFILECON.

498

warning (498): ENDFILE is a no-op on a terminal device

FOR$IOS_ENDFILECON.

499

warning (499): REWIND is a no-op on terminal device

FOR$IOS_REWINDCON.

500

severe (500): Message not found

FOR$IOS_ MSG_NOT_FOUND. An internal error occurred in error-message processing.

501

severe (501): Insufficient memory to allocate Fortran RTL message

FOR$IOS_NO_MEMORY_0.

502

severe (502): Insufficient memory to allocate Fortran RTL message buffer, message #"number"

FOR$IOS_NO_MEMORY_1.

503

severe (503): Insufficient memory to allocate Fortran RTL message buffer, message #"number" = hex "hex-number"

FOR$IOS_NO_MEMORY_2.

504

severe (504): FormatMessage failed for system message number "number"

FOR$IOS_MSG_FAILED .

505

info (505): Intel(r) Visual Fortran runtime error

FOR$IOS_VISUAL_ERROR.

506

info (506): The allocation of dynamic common "string" of size "string" in procedure "string" failed

FOR$IOS_ALLOC_DYN_COMM.

508

info (508): The current size of dynamic common "string" is "string"

FOR$IOS_CURR_SIZE_COMM.

509

info (509): The declared size in procedure "string" is "string" bytes

FOR$IOS_DECL_SIZE.

510

info (510): Heap Allocation Failure while creating common "string" in procedure "string"

FOR$IOS_HEAP_ALLOC.

512

info (512): Intel(r) Visual Fortran runtime error

FOR$IOS_VISUAL_FORTRAN.

514

info (514): , line "string", position "number"

FOR$IOS_LINE_AND_POS.

515

info (515): "string"Allocate Dynamic Common Error - "string"

FOR$IOS_ALLOC_COMM_ERR.

516

info (516): Allocation Failure

FOR$IOS_ALLOC_FAIL.

517

info (517): Inconsistent Common Size

FOR$IOS_INC_COMM_SIZE.

518

info (518): Empty Heap

FOR$IOS_EMPTY_HEAP.

519

info (519): Incrementally linked image--PC correlation disabled

FOR$IOS_INCR_LINKED.

520

info (520): Stack trace terminated abnormally

FOR$IOS_TRACE_ABNORMAL.

521

info (521): Stop - Program terminated

FOR$IOS_STOP_TERMINATED.

522

info (522): Return code

FOR$IOS_RETURN_CODE.

523

info (523): File name missing or blank - please enter file name

FOR$IOS_NAME_MISSING.

524

info (524): UNIT "number"?

FOR$IOS_UNIT_D.

525

warning (525): IEEE_DIVIDE_BY_ZERO is signaling

FOR$IOS_STOP_EX_ZERODIV.

526

warning (526): IEEE_INVALID is signaling

FOR$IOS_STOP_EX_INVAL.

527

warning (527): IEEE_OVERFLOW is signaling

FOR$IOS_STOP_EX_OVRFL.

528

warning (528): IEEE_UNDERFLOW is signaling

FOR$IOS_STOP_EX_UNDFL.

529

Info (529): Attempt to close a unit which was not open.

FOR$IOS_SYNERRNAM. The unit number specified on a CLOSE statement is not currently open.

530

info (530): FILE= specifier ignored when STATUS has value SCRATCH

FOR$IOS_NAMED_SCRATCH.

531

error (531): SEGMENTED record length includes control bytes, must be greater than 4, unit "number", file "string"

FOR$IOS_SEGINCRLEN.

540

severe (540): Array or substring subscript expression out of range

FOR$IOS_F6096. An expression used to index an array was smaller than the lower dimension bound or larger than the upper dimension bound.

541

severe (541): CHARACTER substring expression out of range

FOR$IOS_F6097. An expression used to index a character substring was illegal.

542

severe (542): Label not found in assigned GOTO list

FOR$IOS_F6098. The label assigned to the integer-variable name was not specified in the label list of the assigned GOTO statement.

543

severe (543): INTEGER arithmetic overflow

FOR$IOS_F6099. This error occurs whenever integer arithmetic results in overflow.

544

severe (544): INTEGER overflow on input

FOR$IOS_F6100. An integer item exceeded the legal size limits.

  • An INTEGER (1) item must be in the range -127 to 128.

  • An INTEGER (2) item must be in the range -32,767 to 32,768.

  • An INTEGER (4) item must be in the range -2,147,483,647 to 2,147,483,648.

545

severe (545): Invalid INTEGER

FOR$IOS_F6101. Either an illegal character appeared as part of an integer, or a numeric character larger than the radix was used in an alternate radix specifier.

546

severe (546): REAL indefinite (uninitialized or previous error)

FOR$IOS_F6102. An invalid real number was read from a file, an internal variable, or the console. This can happen if an invalid number is generated by passing an illegal argument to an intrinsic function -- for example, SQRT(-1) or ASIN(2). If the invalid result is written and then later read, the error will be generated.

547

severe (547): Invalid REAL

FOR$IOS_F6103. An illegal character appeared as part of a real number.

548

severe (548): REAL math overflow

FOR$IOS_F6104. A real value was too large. Floating-point overflows in either direct or emulated mode generate NaN (Not-A-Number) exceptions, which appear in the output field as asterisks (*) or the letters NAN.

549

severe (549): No matching CASE found for SELECT CASE

FOR$IOS_F6105.

550

severe (550): INTEGER assignment overflow

FOR$IOS_F6106. This error occurs when assignment to an integer is out of range.

551

severe (551): Formatted I/O not consistent with OPEN options

FOR$IOS_F6200. The program tried to perform formatted I/O on a unit opened with FORM='UNFORMATTED' or FORM='BINARY'.

552

severe (552): List-directed I/O not consistent with OPEN options

FOR$IOS_F6201. The program tried to perform list-directed I/O on a file that was not opened with FORM='FORMATTED' and ACCESS='SEQUENTIAL'.

553

severe (553): Terminal I/O not consistent with OPEN options

FOR$IOS_F6202. When a special device such as CON, LPT1, or PRN is opened in an OPEN statement, its access must be sequential and its format must be either formatted or binary. By default ACCESS='SEQUENTIAL' and FORM='FORMATTED' in OPEN statements.

To generate this error the device's OPEN statement must contain an option not appropriate for a terminal device, such as ACCESS='DIRECT' or FORM='UNFORMATTED'.

554

severe (554): Direct I/O not consistent with OPEN options

FOR$IOS_F6203. A REC=option was included in a statement that transferred data to a file that was opened with the ACCESS='SEQUENTIAL' option.

555

severe (555): Unformatted I/O not consistent with OPEN options

FOR$IOS_F6204. If a file is opened with FORM='FORMATTED', unformatted or binary data transfer is prohibited.

556

severe (556): A edit descriptor expected for CHARACTER

FOR$IOS_F6205. The A edit descriptor was not specified when a character data item was read or written using formatted I/O.

557

severe (557): E, F, D, or G edit descriptor expected for REAL

FOR$IOS_F6206. The E, F, D, or G edit descriptor was not specified when a real data item was read or written using formatted I/O.

558

severe (558): I edit descriptor expected for INTEGER

FOR$IOS_F6207. The I edit descriptor was not specified when an integer data item was read or written using formatted I/O.

559

severe (559): L edit descriptor expected for LOGICAL

FOR$IOS_F6208. The L edit descriptor was not specified when a logical data item was read or written using formatted I/O.

560

severe (560): File already open: parameter mismatch

FOR$IOS_F6209. An OPEN statement specified a connection between a unit and a filename that was already in effect. In this case, only the BLANK= specifier can have a different setting.

561

severe (561): Namelist I/O not consistent with OPEN options

FOR$IOS_F6210. The program tried to perform namelist I/O on a file that was not opened with FORM='FORMATTED' and ACCESS='SEQUENTIAL'.

562

severe (562): IOFOCUS option illegal with non-window unit

FOR$IOS_F6211. IOFOCUS was specified in an OPEN or INQUIRE statement for a non-window unit. The IOFOCUS option can only be used when the unit opened or inquired about is a QuickWin child window.

563

severe (563): IOFOCUS option illegal without QuickWin

FOR$IOS_F6212. IOFOCUS was specified in an OPEN or INQUIRE statement for a non-QuickWin application. The IOFOCUS option can only be used when the unit opened or inquired about is a QuickWin child window.

564

severe (564): TITLE illegal with non-window unit

FOR$IOS_F6213. TITLE was specified in an OPEN or INQUIRE statement for a non-window unit. The TITLE option can only be used when the unit opened or inquired about is a QuickWin child window.

565

severe (565): TITLE illegal without QuickWin

FOR$IOS_F6214. TITLE was specified in an OPEN or INQUIRE statement for a non-QuickWin application. The TITLE option can only be used when the unit opened or inquired about is a QuickWin child window.

566

severe (566): KEEP illegal for scratch file

FOR$IOS_F6300. STATUS='KEEP' was specified for a scratch file. This is illegal because scratch files are automatically deleted at program termination.

567

severe (567): SCRATCH illegal for named file

FOR$IOS_F6301. STATUS='SCRATCH' should not be used in a statement that includes a filename.

568

severe (568): Multiple radix specifiers

FOR$IOS_F6302. More than one alternate radix for numeric I/O was specified. F6302 can indicate an error in spacing or a mismatched format for data of different radices.

569

severe (569): Illegal radix specifier

FOR$IOS_F6303. A radix specifier was not between 2 and 36, inclusive. Alternate radix constants must be of the form n#ddd... where n is a radix from 2 to 36 inclusive and ddd... are digits with values less than the radix. For example, 3#12 and 34#7AX are valid constants with valid radix specifiers. 245#7A and 39#12 do not have valid radix specifiers and generate error 569 if input.

570

severe (570): Illegal STATUS value

FOR$IOS_F6304. An illegal value was used with the STATUS option.

STATUS accepts the following values:

  • 'KEEP' or 'DELETE'' when used with CLOSE statements

  • 'OLD', 'NEW', 'SCRATCH', or 'UNKNOWN' when used with OPEN statements

571

severe (571): Illegal MODE value

FOR$IOS_F6305. An illegal value was used with the MODE option.

MODE accepts the values 'READ', 'WRITE', or 'READWRITE'.

572

severe (572): Illegal ACCESS value

FOR$IOS_F6306. An illegal value was used with the ACCESS option.

ACCESS accepts the values 'SEQUENTIAL' and 'DIRECT'.

573

severe (573): Illegal BLANK value

FOR$IOS_F6307. An illegal value was used with the BLANK option.

BLANK accepts the values 'NULL' and 'ZERO'.

574

severe (574): Illegal FORM value

FOR$IOS_F6308. An illegal value was used with the FORM option.

FORM accepts the following values: 'FORMATTED', 'UNFORMATTED', and 'BINARY'.

575

severe (575): Illegal SHARE value

FOR$IOS_F6309. An illegal value was used with the SHARE option.

SHARE accepts the values 'COMPAT', 'DENYRW', 'DENYWR', 'DENYRD', and 'DENYNONE'.

576

severe (576): illegal LOCKMODE value

FOR$IOS_F6310.

577

severe (577): Illegal record number

FOR$IOS_F6311. An invalid number was specified as the record number for a direct-access file.

The first valid record number for direct-access files is 1.

578

severe (578): No unit number associated with *

FOR$IOS_F6312. In an INQUIRE statement, the NUMBER option was specified for the file associated with * (console).

579

severe (579): illegal RECORDS value

FOR$IOS_F6313.

580

severe (580): Illegal unit number

FOR$IOS_F6314. An illegal unit number was specified.

Legal unit numbers can range from 0 through 2**31-1, inclusive.

581

severe (581): Illegal RECL value

FOR$IOS_F6315. A negative or zero record length was specified for a direct file.

The smallest valid record length for direct files is 1.

582

severe (582): Array already allocated

FOR$IOS_F6316. The program attempted to ALLOCATE an already allocated array.

583

severe (583): Array size zero or negative

FOR$IOS_F6317. The size specified for an array in an ALLOCATE statement must be greater than zero.

584

severe (584): Non-HUGE array exceeds 64K

FOR$IOS_F6318.

585

severe (585): Array not allocated

FOR$IOS_F6319. The program attempted to DEALLOCATE an array that was never allocated.

586

severe (586): BACKSPACE illegal on terminal device

FOR$IOS_F6400. A BACKSPACE statement specified a unit connected to a terminal device such as a terminal or printer.

587

severe (587): EOF illegal on terminal device

FOR$IOS_F6401. An EOF intrinsic function specified a unit connected to a terminal device such as a terminal or printer.

588

severe (588): ENDFILE illegal on terminal device

FOR$IOS_F6402. An ENDFILE statement specified a unit connected to a terminal device such as a terminal or printer.

589

severe (589): REWIND illegal on terminal device

FOR$IOS_F6403. A REWIND statement specified a unit connected to a terminal device such as a terminal or printer.

590

severe (590): DELETE illegal for read-only file

FOR$IOS_F6404. A CLOSE statement specified STATUS='DELETE' for a read-only file.

591

severe (591): External I/O illegal beyond end of file

FOR$IOS_F6405. The program tried to access a file after executing an ENDFILE statement or after it encountered the end-of-file record during a read operation.

A BACKSPACE, REWIND, or OPEN statement must be used to reposition the file before execution of any I/O statement that transfers data.

592

severe (592): Truncation error: file closed

FOR$IOS_F6406.

593

severe (593): Terminal buffer overflow

FOR$IOS_F6407. More than 131 characters were input to a record of a unit connected to the terminal (keyboard). Note that the operating system may impose additional limits on the number of characters that can be input to the terminal in a single record.

594

severe (594): Comma delimiter disabled after left repositioning

FOR$IOS_F6408. If you have record lengths that exceed the buffer size associated with the record, (for instance, the record is a file with the buffer set by BLOCKSIZE in the OPEN statement), either you should not do left tabbing within the record, or you should not use commas as field delimiters. This is because commas are disabled as input field delimiters if left tabbing leaves the record positioned in a previous buffer.

For example, consider you have a file LONG.DAT that is one continuous record with data fields separated by commas. You then set the buffer associated with the file to 512 bytes, read more than one buffer size of data, tab left to data in the previous buffer, and attempt to read further data, as follows:

   INTEGER value(300)
   OPEN (1, FILE = 'LONG.DAT', BLOCKSIZE = 512)s
   READ (1, 100) (value(i), i = 1, 300)s
100 FORMAT (290I2,TL50,10I2)

In this case, error 594 occurs.

595

severe (595): LOCKING illegal on sequential file

FOR$IOS_F6409.

596

severe (596): file already locked or unlocked

FOR$IOS_F6410.

597

severe (597): file deadlocked

FOR$IOS_F6411.

599

severe (599): File already connected to a different unit

FOR$IOS_F6413. The program tried to connect an already connected file to a new unit.

A file can be connected to only one unit at a time.

600

severe (600): Access not allowed

FOR$IOS_F6414.

This error can be caused by one of the following:

  • The filename specified in an OPEN statement was a directory.

  • An OPEN statement tried to open a read-only file for writing.

  • The file was opened with SHARE='DENYRW' by another process.

601

severe (601): File already exists

FOR$IOS_F6415. An OPEN statement specified STATUS='NEW' for a file that already exists.

602

severe (602): File not found

FOR$IOS_F6416. An OPEN statement specified STATUS='OLD' for a specified file or a directory path that does not exist.

603

severe (603): Too many open files

FOR$IOS_F6417. The program exceeded the number of open files the operating system allows.

604

severe (604): Too many units connected

FOR$IOS_F6418. The program exceeded the number of units that can be connected at one time. Units are connected with the OPEN statement.

605

severe (605): Illegal structure for unformatted file

FOR$IOS_F6419. The file was opened with FORM='UNFORMATTED' and ACCESS='SEQUENTIAL', but its internal physical structure was incorrect or inconsistent. Possible causes: the file was created in another mode or by a non-Fortran program.

606

severe (606): Unknown unit number

FOR$IOS_F6420. A statement such as BACKSPACE or ENDFILE specified a file that had not yet been opened. (The READ and WRITE statements do not cause this problem because they prompt you for a file if the file has not been opened yet.)

607

severe (607): File read-only or locked against writing

FOR$IOS_F6421. The program tried to transfer data to a file that was opened in read-only mode or locked against writing.

The error message may indicate a CLOSE error when the fault is actually coming from WRITE. This is because the error is not discovered until the program tries to write buffered data when it closes the file.

608

severe (608): No space left on device

FOR$IOS_F6422. The program tried to transfer data to a file residing on a device (such as a hard disk) that was out of storage space.

609

severe (609): Too many threads

FOR$IOS_F6423. Too many threads were active simultaneously. At most, 32 threads can be active at one time. Close any unnecessary processes or child windows within your application.

610

severe (610): Invalid argument

FOR$IOS_F6424.

611

severe (611): BACKSPACE illegal for SEQUENTIAL write-only files

FOR$IOS_F6425. The BACKSPACE statement is not allowed in files opened with MODE='WRITE' (write-only status) because BACKSPACE requires reading the previous record in the file to provide positioning.

Resolve the problem by giving the file read access or by avoiding the BACKSPACE statement. Note that the REWIND statement is valid for files opened as write-only.

612

severe (612): File not open for reading or file locked

FOR$IOS_F6500. The program tried to read from a file that was not opened for reading or was locked.

613

severe (613): End of file encountered

FOR$IOS_F6501. The program tried to read more data than the file contains.

614

severe (614): Positive integer expected in repeat field

FOR$IOS_F6502. When the i*c form is used in list-directed input, the i must be a positive integer. For example, consider the following statement:

  READ(*,*) a, b

Input 2*56.7 is accepted, but input 2.1*56.7 returns error 614.

615

severe (615): Multiple repeat field

FOR$IOS_F6503. In list-directed input of the form i*c, an extra repeat field was used. For example, consider the following:

  READ(*,*) I, J, K

Input of 2*1*3 returns this error. The 2*1 means send two values, each 1; the *3 is an error.

616

severe (616): Invalid number in input

FOR$IOS_F6504. Some of the values in a list-directed input record were not numeric. For example, consider the following:

  READ(*,*) I, J

The preceding statement would cause this error if the input were: 123 'abc'.

617

severe (617): Invalid string in input

FOR$IOS_F6505. A string item was not enclosed in single quotation marks.

618

severe (618): Comma missing in COMPLEX input

FOR$IOS_F6506. When using list-directed input, the real and imaginary components of a complex number were not separated by a comma.

619

severe (619): T or F expected in LOGICAL read

FOR$IOS_F6507. The wrong format was used for the input field for logical data.

The input field for logical data consists of optional blanks, followed by an optional decimal point, followed by a T for true or F for false. The T or F may be followed by additional characters in the field, so that .TRUE. and .FALSE. are acceptable input forms.

620

severe (620): Too many bytes read from unformatted record

FOR$IOS_F6508. The program tried to read more data from an unformatted file than the current record contained. If the program was reading from an unformatted direct file, it tried to read more than the fixed record length as specified by the RECL option. If the program was reading from an unformatted sequential file, it tried to read more data than was written to the record.

621

severe (621): H or apostrophe edit descriptor illegal on input

FOR$IOS_F6509. Hollerith (H) or apostrophe edit descriptors were encountered in a format used by a READ statement.

622

severe (622): Illegal character in hexadecimal input

FOR$IOS_F6510. The input field contained a character that was not hexadecimal.

Legal hexadecimal characters are 0 - 9 and A - F.

623

severe (623): Variable name not found

FOR$IOS_F6511. A name encountered on input from a namelist record is not declared in the corresponding NAMELIST statement.

624

severe (624): Invalid NAMELIST input format

FOR$IOS_F6512. The input record is not in the correct form for NAMELIST input.

625

severe (625): Wrong number of array dimensions

FOR$IOS_F6513. In NAMELIST input, an array name was qualified with a different number of subscripts than its declaration, or a non-array name was qualified.

626

severe (626): Array subscript exceeds allocated area

FOR$IOS_F6514. A subscript was specified in NAMELIST input which exceeded the declared dimensions of the array.

627

severe (627): Invalid subrange in NAMELIST input

FOR$IOS_F6515. A character item in namelist input was qualified with a subrange that did not meet the requirement that 1 <= e1 <= e2 <= len (where "len" is the length of the character item, "e1" is the leftmost position of the substring, and "e2" is the rightmost position of the substring).

628

severe (628): Substring range specified on non-CHARACTER item

FOR$IOS_F6516. A non-CHARACTER item in namelist input was qualified with a substring range.

629

severe (629): Internal file overflow

FOR$IOS_F6600. The program either overflowed an internal-file record or tried to write to a record beyond the end of an internal file.

630

severe (630): Direct record overflow

FOR$IOS_F6601. The program tried to write more than the number of bytes specified in the RECL option to an individual record of a direct-access file.

631

severe (631):Numeric field bigger than record size

FOR$IOS_F6602. The program tried to write a non-CHARACTER item across a record boundary in list-directed or namelist output. Only character constants can cross record boundaries.

632

severe (632): Heap space limit exceeded

FOR$IOS_F6700. The program ran out of heap space. The ALLOCATE statement and various internal functions allocate memory from the heap. This error will be generated when the last of the heap space is used up.

633

severe (633): Scratch file name limit exceeded

FOR$IOS_F6701. The program exhausted the template used to generate unique scratch-file names. The maximum number of scratch files that can be open at one time is 26.

634

severe (634): D field exceeds W field in ES edit descriptor

FOR$IOS_F6970. The specified decimal length d exceeds the specified total field width w in an ES edit descriptor.

635

severe (635): D field exceeds W field in EN edit descriptor

FOR$IOS_F6971. The specified decimal length d exceeds the specified total field width w in an EN edit descriptor.

636

severe (636): Exponent of 0 not allowed in format

FOR$IOS_F6972.

637

severe (637): Integer expected in format

FOR$IOS_F6980. An edit descriptor lacked a required integer value. For example, consider the following:

      WRITE(*, 100) I, J
  100 FORMAT (I2, TL, I2)

The preceding code will cause this error because an integer is expected after TL.

638

severe (638): Initial left parenthesis expected in format

FOR$IOS_F6981. A format did not begin with a left parenthesis ( ( ).

639

severe (639): Positive integer expected in format

FOR$IOS_F6982. A zero or negative integer value was used in a format.

Negative integer values can appear only with the P edit descriptor. Integer values of 0 can appear only in the d and m fields of numeric edit descriptors.

640

severe (640): Repeat count on nonrepeatable descriptor

FOR$IOS_F6983. One or more BN, BZ, S, SS, SP, T, TL, TR, /, $, :, or apostrophe (') edit descriptors had repeat counts associated with them.

641

severe (641): Integer expected preceding H, X, or P edit descriptor

FOR$IOS_F6984. An integer did not precede a (nonrepeatable) H, X, or P edit descriptor.

The correct formats for these descriptors are nH, nX, and kP, respectively, where n is a positive integer and k is an optionally signed integer.

642

severe (642): N or Z expected after B in format

FOR$IOS_F6985. To control interpretation of embedded and trailing blanks within numeric input fields, you must specify BN (to ignore them) or BZ (to interpret them as zeros).

643

severe (643): Format nesting limit exceeded

FOR$IOS_F6986. More than sixteen sets of parentheses were nested inside the main level of parentheses in a format.

644

severe (644): '.' expected in format

FOR$IOS_F6987. No period appeared between the w and d fields of a D, E, F, or G edit descriptor.

645

severe (645): Unexpected end of format

FOR$IOS_F6988. An incomplete format was used.

Improperly matched parentheses, an unfinished Hollerith (H) descriptor, or another incomplete descriptor specification can cause this error.

646

severe (646): Unexpected character in format

FOR$IOS_F6989. A character that cannot be interpreted as part of a valid edit descriptor was used in a format. For example, consider the following:

      WRITE(*, 100) I, J
  100 FORMAT (I2, TL4.5, I2)

The code will generate this error because TL4.5 is not a valid edit descriptor. An integer must follow TL.

647

severe (647): M field exceeds W field in I edit descriptor

FOR$IOS_F6990. In syntax Iw.m, the value of m cannot exceed the value of w.

648

severe (648): Integer out of range in format

FOR$IOS_F6991. An integer value specified in an edit descriptor was too large to represent as a 4-byte integer.

649

severe (649): format not set by ASSIGN

FOR$IOS_F6992. The format specifier in a READ, WRITE, or PRINT statement was an integer variable, but an ASSIGN statement did not properly assign it the statement label of a FORMAT statement in the same program unit.

650

severe (650): Separator expected in format

FOR$IOS_F6993. Within format specifications, edit descriptors must be separated by commas or slashes (/).

651

severe (651): %c or $: nonstandard edit descriptor in format

FOR$IOS_F6994.

652

severe (652): Z: nonstandard edit descriptor in format

FOR$IOS_F6995. Z is not a standard edit descriptor in format.

If you want to transfer hexadecimal values, you must use the edit descriptor form Zw[.m], where w is the field width and m is the minimum number of digits that must be in the field (including leading zeros).

653

severe (653): DOS graphics not supported under Windows NT

FOR$IOS_F6996.

654

severe (654): Graphics error

FOR$IOS_F6997. An OPEN statement in which IOFOCUS was TRUE, either explicitly or by default, failed because the new window could not receive focus. The window handle may be invalid, or closed, or there may be a memory resource problem.

655

severe (655): Using QuickWin is illegal in console application

FOR$IOS_F6998. A call to QuickWin from a console application was encountered during execution.

656

severe (656): Illegal 'ADVANCE' value

FOR$IOS_F6999. The ADVANCE option can only take the values 'YES' and 'NO'. ADVANCE='YES' is the default. ADVANCE is a READ statement option.

657

severe (657): DIM argument to SIZE out of range

FOR$IOS_F6702. The argument specified for DIM must be greater than or equal to 1, and less than or equal to the number of dimensions in the specified array. Consider the following:

  i = SIZE (array, DIM = dim)

In this case, 1 <= dim <= n, where n is the number of dimensions in array.

658

severe (658): Undefined POINTER used as argument to ASSOCIATED function

FOR$IOS_F6703. A POINTER used as an argument to the ASSOCIATED function must be defined; that is, assigned to a target, allocated, or nullified.

659

severe (659): Reference to uninitialized POINTER

FOR$IOS_F6704. Except in an assignment statement, a pointer must not be referenced until it has been initialized: assigned to a target, allocated or nullified.

660

severe (660): Reference to POINTER which is not associated

FOR$IOS_F6705. Except in an assignment statement and certain procedure references, a pointer must not be referenced until it has been associated: either assigned to a target or allocated.

661

severe (661): Reference to uninitialized POINTER 'pointer'

FOR$IOS_F6706. Except in an assignment statement, a pointer must not be referenced until it has been initialized: assigned to a target, allocated or nullified.

662

severe (662): reference to POINTER "pointer" which is not associated

FOR$IOS_F6707. Except in an assignment statement and certain procedure references, a pointer must not be referenced until it has been associated: either assigned to a target or allocated.

663

severe (663): Out of range: substring starting position "pos" is less than 1

FOR$IOS_F6708. A substring starting position must be a positive integer variable or expression that indicates a position in the string: at least 1 and no greater than the length of the string.

664

severe (664): Out of range: substring ending position "pos" is greater than string length 'len'

FOR$IOS_F6709. A substring ending position must be a positive integer variable or expression that indicates a position in the string: at least 1 and no greater than the length of the string.

665

severe (665): Subscript "number" of "string" (value "var") is out of range ('first:last')

FOR$IOS_F6710. The subscript for a substring within a string is not a valid string position: at least 1 and no greater than the length of the string.

666

severe (666): Subscript "number" of "string" (value "var") is out of range ('first:*')

FOR$IOS_F6711. The subscript for a substring within a string is not a valid string position: at least 1 and no greater than the length of the string.

667

severe (667): VECTOR argument to PACK has incompatible character length

FOR$IOS_F6712. The character length of elements in the VECTOR argument to PACK is not the same as the character length of elements in the array to be packed.

668

severe (668): VECTOR argument to PACK is too small

FOR$IOS_F6713. The VECTOR argument to PACK must have at least as many elements as there are true elements in MASK (the array that controls packing).

669

severe (669): SOURCE and PAD arguments to RESHAPE have different character lengths

FOR$IOS_F6714. The character length of elements in the SOURCE and PAD arguments to PACK must be the same.

670

severe (670): Element "number" of SHAPE argument to RESHAPE is negative

FOR$IOS_F6715. The SHAPE vector specifies the shape of the reshaped array. Since an array cannot have a negative dimension, SHAPE cannot have a negative element.

671

severe (671): SOURCE too small for specified SHAPE in RESHAPE, and no PAD

FOR$IOS_F6716. If there is no PAD array, the SOURCE argument to RESHAPE must have enough elements to make an array of the shape specified by SHAPE.

672

severe (672): Out of memory

FOR$IOS_F6717. The system ran out of memory while trying to make the array specified by RESHAPE. If possible, reset your virtual memory size through the Windows* Control Panel, or close unnecessary applications and deallocate all allocated arrays that are no longer needed.

673

severe (673): SHAPE and ORDER arguments to RESHAPE have different sizes ('size1' and 'size2')

FOR$IOS_F6718. ORDER specifies the order of the array dimensions given in SHAPE, and they must be vectors of the same size.

674

severe (674): Element "n" of ORDER argument to RESHAPE is out of range (range)

FOR$IOS_F6719. The ORDER argument specifies the order of the dimensions of the reshaped array, and it must be a permuted list of (1, 2, ..., "n") where "n" is the highest dimension in the reshaped array.

675

severe (675): Value "n" occurs twice in ORDER argument to RESHAPE

FOR$IOS_F6720. The ORDER vector specifies the order of the dimensions of the reshaped array, and it must be a permuted list of (1, 2, ..., "n") where "n" is the highest dimension in the reshaped array. No dimension can occur twice.

676

severe (676): Impossible nextelt overflow in RESHAPE

FOR$IOS_F6721.

677

severe (677): Invalid value "dim" for argument DIM for SPREAD of rank 'rank' source

FOR$IOS_F6722. The argument specified for DIM to SPREAD must be greater than or equal to 1, and less than or equal to one larger than the number of dimensions (rank) of SOURCE. Consider the following statement:

  result = SPREAD (SOURCE= array, DIM = dim, NCOPIES = k)

In this case, 1 <= dim <= n+ 1, where nis the number of dimensions in array.

678

severe (678): Complex zero raised to power zero

FOR$IOS_F6723. Zero of any type (complex, real, or integer) cannot be raised to zero power.

679

severe (679): Complex zero raised to negative power

FOR$IOS_F6724. Zero of any type (complex, real, or integer) cannot be raised to a negative power. Raising to a negative power inverts the operand.

680

severe (680): Impossible error in NAMELIST input

FOR$IOS_F6725.

681

severe (681):DIM argument to CSHIFT ("dim") is out of range

FOR$IOS_F6726. The optional argument DIM specifies the dimension along which to perform the circular shift, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array to be shifted. That is, 1 <= DIM <= n, where nis the number of dimensions in the array to be shifted.

682

severe (682): DIM argument ("dim") to CSHIFT is out of range (1:"n")

FOR$IOS_F6727. The optional argument DIM specifies the dimension along which to perform the circular shift, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array to be shifted. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in the array to be shifted.

683

severe (683): Shape mismatch (dimension "dim") between ARRAY and SHIFT in CSHIFT

FOR$IOS_F6728. The SHIFT argument to CSHIFT must be either scalar or an array one dimension smaller than the shifted array. If an array, the shape of the SHIFT must conform to the shape of the array being shifted in every dimension except the one being shifted along.

684

severe (684): Internal error - bad arguments to CSHIFT_CA

FOR$IOS_F6729.

685

severe (685): Internal error - bad arguments to CSHIFT_CAA

FOR$IOS_F6730.

686

severe (686): DATE argument to DATE_AND_TIME is too short (LEN="len")

FOR$IOS_F6731. The character DATE argument must have a length of at least eight to contain the complete value.

687

severe (687): TIME argument to DATE_AND_TIME is too short (LEN="len")

FOR$IOS_F6732. The character TIME argument must have a length of at least ten to contain the complete value.

688

severe (688): ZONE argument to DATE_AND_TIME is too short (LEN="len")

FOR$IOS_F6733. The character ZONE argument must have a length of at least five to contain the complete value.

689

severe (689): VALUES argument to DATE_AND_TIME is too small ("size" elements)

FOR$IOS_F6734. The integer VALUES argument must be a one-dimensional array with a size of at least eight to hold all returned values.

690

severe (690): Out of range: DIM argument to COUNT has value "dim"

FOR$IOS_F6735. The optional argument DIM specifies the dimension along which to count true elements of MASK, and must be greater than or equal to 1 and less than or equal to the number of dimensions in MASK. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in MASK.

691

severe (691): Out of range: DIM argument to COUNT has value "dim" with MASK of rank "rank"

FOR$IOS_F6736. The optional argument DIM specifies the dimension along which to count true elements of MASK, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in MASK. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in MASK.

692

severe (692): Out of range: DIM argument to PRODUCT has value "dim"

FOR$IOS_F6737. The optional argument DIM specifies the dimension along which to compute the product of elements in an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be multiplied.

693

severe (693): Out of range: DIM argument to PRODUCT has value "dim" with ARRAY of rank "rank"

FOR$IOS_F6738. The optional argument DIM specifies the dimension along which to compute the product of elements in an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) of the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be multiplied.

694

severe (694): Out of range: DIM argument to SUM has value "dim" with ARRAY of rank "rank"

FOR$IOS_F6739. The optional argument DIM specifies the dimension along which to sum the elements of an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) of the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be summed.

695

severe (695): Real zero raised to zero power

FOR$IOS_F6740. Zero of any type (real, complex, or integer) cannot be raised to zero power.

696

severe (696): Real zero raised to negative power

FOR$IOS_F6741. Zero of any type (real, complex, or integer) cannot be raised to a negative power. Raising to a negative power inverts the operand.

697

severe (697): Out of range: DIM argument to SUM has value "dim"

FOR$IOS_F6742. The optional argument DIM specifies the dimension along which to sum the elements of an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be summed.

698

severe (698): DIM argument ("dim") to EOSHIFT is out of range (1:"n")

FOR$IOS_F6743. The optional argument DIM specifies the dimension along which to perform an end-off shift in an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be shifted.

699

severe (699): Shape mismatch (dimension "dim") between ARRAY and BOUNDARY in EOSHIFT

FOR$IOS_F6744. The BOUNDARY argument to EOSHIFT must be either scalar or an array one dimension smaller than the shifted array. If an array, the shape of the BOUNDARY must conform to the shape of the array being shifted in every dimension except the one being shifted along.

700

severe (700): DIM argument to EOSHIFT is out of range ("dim")

FOR$IOS_F6745. The optional argument DIM specifies the dimension along which to perform an end-off shift in an array, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array holding the elements to be shifted.

701

severe (701): Shape mismatch (dimension "dim") between ARRAY and SHIFT in EOSHIFT

FOR$IOS_F6746. The SHIFT argument to EOSHIFT must be either scalar or an array one dimension smaller than the shifted array. If an array, the shape of the SHIFT must conform to the shape of the array being shifted in every dimension except the one being shifted along.

702

severe (702): BOUNDARY argument to EOSHIFT has wrong LEN ("len1 instead of len2")

FOR$IOS_F6747. The character length of elements in the BOUNDARY argument and in the array being end-off shifted must be the same.

703

severe (703): BOUNDARY has LEN "len" instead of "len" to EOSHIFT

FOR$IOS_F6748.

704

severe (704): Internal error - bad arguments to EOSHIFT

FOR$IOS_F6749.

705

severe (705): GETARG: value of argument "number" is out of range

FOR$IOS_F6750. The value used for the number of the command-line argument to retrieve with GETARG must be 0 or a positive integer. If the number of the argument to be retrieved is greater than the actual number of arguments, blanks are returned, but no error occurs.

706

severe (706): FLUSH: value of LUNIT "number" is out of range

FOR$IOS_F6751. The unit number specifying which I/O unit to flush to its associated file must be an integer between 0 and 2**31-1, inclusive. If the unit number is valid, but the unit is not opened, error F6752 is generated.

707

severe (707): FLUSH: Unit "number" is not connected

FOR$IOS_F6752. The I/O unit specified to be flushed to its associated file is not connected to a file.

708

severe (708): Invalid string length ("len") to ICHAR

FOR$IOS_F6753. The character argument to ICHAR must have length of one.

709

severe (709): Invalid string length ("len") to IACHAR

FOR$IOS_F6754. The character argument to IACHAR must have length of one.

710

severe (710): Integer zero raised to negative power

FOR$IOS_F6755. Zero of any type (integer, real, or complex) cannot be raised to a negative power. Raising to a negative power inverts the operand.

711

severe (711): INTEGER zero raised to zero power

FOR$IOS_F6756. Zero of any type (integer, real, or complex) cannot be raised to zero power.

712

severe (712): SIZE argument ("size") to ISHFTC intrinsic out of range

FOR$IOS_F6757. The argument SIZE must be positive and must not exceed the bit size of the integer being shifted. The bit size of this integer can be determined with the function BIT_SIZE.

713

severe (713): SHIFT argument ("shift") to ISHFTC intrinsic out of range

FOR$IOS_F6758. The argument SHIFT to ISHFTC must be an integer whose absolute value is less than or equal to the number of bits being shifted: either all bits in the number being shifted or a subset specified by the optional argument SIZE.

714

severe (714): Out of range: DIM argument to LBOUND has value "dim"

FOR$IOS_F6759. The optional argument DIM specifies the dimension whose lower bound is to be returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

715

severe (715): Out of range: DIM argument ("dim") to LBOUND greater than ARRAY rank "rank"

FOR$IOS_F6760. The optional argument DIM specifies the dimension whose lower bound is to be returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

716

severe (716): Out of range: DIM argument to MAXVAL has value "dim"

FOR$IOS_F6761. The optional argument DIM specifies the dimension along which maximum values are returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

717

severe (717): Out of range: DIM argument to MAXVAL has value "dim" with ARRAY of rank "rank"

FOR$IOS_F6762. The optional argument DIM specifies the dimension along which maximum values are returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

718

severe (718): Cannot allocate temporary array -- out of memory

FOR$IOS_F6763. There is not enough memory space to hold a temporary array.

Dynamic memory allocation is limited by several factors, including swap file size and memory requirements of other applications that are running. If you encounter an unexpectedly low limit, you may need to reset your virtual memory size through the Windows Control Panel or redefine the swap file size. Allocated arrays that are no longer needed should be deallocated.

719

severe (719): Attempt to DEALLOCATE part of a larger object

FOR$IOS_F6764. An attempt was made to DEALLOCATE a pointer to an array subsection or an element within a derived type. The whole data object must be deallocated; parts cannot be deallocated.

720

severe (720): Pointer in DEALLOCATE is ASSOCIATED with an ALLOCATABLE array

FOR$IOS_F6765. Deallocating a pointer associated with an allocatable target is illegal. Instead, deallocate the target the pointer points to, which frees memory and disassociates the pointer.

721

severe (721): Attempt to DEALLOCATE an object which was not allocated

FOR$IOS_F6766. You cannot deallocate an array unless it has been previously allocated. You cannot deallocate a pointer whose target was not created by allocation. The intrinsic function ALLOCATED can be used to determine whether an allocatable array is currently allocated.

722

severe (722): Cannot ALLOCATE scalar POINTER -- out of memory

FOR$IOS_F6767. There is not enough memory space to allocate the pointer.

Dynamic memory allocation is limited by several factors, including swap file size and memory requirements of other applications that are running. If you encounter an unexpectedly low limit, you may need to reset your virtual memory size through the Windows* Control Panel or redefine the swap file size. Allocated arrays that are no longer needed should be deallocated.

723

severe (723): DEALLOCATE: object not allocated/associated

FOR$IOS_F6768. You cannot deallocate an array unless it has been previously allocated. You cannot deallocate a pointer whose target was not created by allocation, or a pointer that has undefined association status.

The intrinsic function ALLOCATED can be used to determine whether an allocatable array is currently allocated.

724

severe (724): Cannot ALLOCATE POINTER array -- out of memory

FOR$IOS_F6769. There is not enough memory space to allocate the POINTER array.

Dynamic memory allocation is limited by several factors, including swap file size and memory requirements of other applications that are running. If you encounter an unexpectedly low limit, you may need to reset your virtual memory size through the Windows* Control Panel or redefine the swap file size. Allocated arrays that are no longer needed should be deallocated.

725

severe (725): DEALLOCATE: Array not allocated

FOR$IOS_F6770. It is illegal to DEALLOCATE an array that is not allocated. You can check the allocation status of an array before deallocating with the ALLOCATED function.

726

severe (726): DEALLOCATE: Character array not allocated

FOR$IOS_F6771. It is illegal to DEALLOCATE an array that is not allocated. You can check the allocation status of an array before deallocating with the ALLOCATED function.

727

severe (727): Cannot ALLOCATE allocatable array -- out of memory

FOR$IOS_F6772. There is not enough memory space to hold the array.

Dynamic memory allocation is limited by several factors, including swap file size and memory requirements of other applications that are running. If you encounter an unexpectedly low limit, you may need to reset your virtual memory size through the Windows* Control Panel or redefine the swap file size. Allocated arrays that are no longer needed should be deallocated.

728

severe (728): Cannot allocate automatic object -- out of memory

FOR$IOS_F6773. There is not enough memory space to hold the automatic data object.

Dynamic memory allocation is limited by several factors, including swap file size and memory requirements of other applications that are running. If you encounter an unexpectedly low limit, you may need to reset your virtual memory size through the Windows* Control Panel or redefine the swap file size. Allocated arrays that are no longer needed should be deallocated.

An automatic data object is an object that is declared in a procedure subprogram or interface, is not a dummy argument, and depends on a nonconstant expression. For example:

  SUBROUTINE  EXAMPLE (N)
    DIMENSION A (N, 5), B(10*N)

The arrays A and B in the example are automatic data objects.

729

severe (729): DEALLOCATE failure: ALLOCATABLE array is not ALLOCATED

FOR$IOS_F6774. It is illegal to DEALLOCATE an array that is not allocated. You can check the allocation status of an array before deallocating with the ALLOCATED function.

730

severe (730): Out of range: DIM argument to MINVAL has value "dim"

FOR$IOS_F6775. The optional argument DIM specifies the dimension along which minimum values are returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array.

731

severe (731): Out of range: DIM argument to MINVAL has value "dim" with ARRAY of rank "rank"

FOR$IOS_F6776. The optional argument DIM specifies the dimension along which minimum values are returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in the array. That is, 1 <= DIM <= "n", where "n"is the number of dimensions in array.

732

severe (732): P argument to MOD is double precision zero

FOR$IOS_F6777. MOD(A,P) is computed as A - INT(A,P) * P. P cannot be zero.

733

severe (733): P argument to MOD is integer zero

FOR$IOS_F6778. MOD(A,P) is computed as A - INT(A,P) * P. P cannot be zero.

734

severe (734): P argument to MOD is real zero

FOR$IOS_F6779. MOD(A,P) is computed as A - INT(A,P) * P. P cannot be zero.

735

severe (735): P argument to MODULO is real zero

FOR$IOS_F6780. MODULO(A,P) for real numbers is computed as A - FLOOR(A,P) * P. So, P cannot be zero.

736

severe (736): P argument to MODULO is zero

FOR$IOS_F6781. In the function, MODULO(A,P), P cannot be zero.

737

severe (737): Argument S to NEAREST is zero

FOR$IOS_F6782. The sign of the S argument to NEAREST(X,S) determines the direction of the search for the nearest number to X, and cannot be zero.

738

severe (738): Heap storage exhausted

FOR$IOS_F6783.

739

severe (739): PUT argument to RANDOM_SEED is too small

FOR$IOS_F6784. The integer array PUT must be greater than or equal to the number of integers the processor uses to set the seed value. This number can be determined by calling RANDOM_SEED with the SIZE argument. For example:

  INTEGER, ALLOCATABLE SEED
  CALL RANDOM_SEED( )           ! initialize processor
  CALL RANDOM_SEED(SIZE = K)    ! get size of seed
  ALLOCATE SEED(K)              ! allocate array
  CALL RANDOM_SEED(PUT = SEED)  ! set the seed

NOTE:

RANDOM_SEED can be called with at most one argument at a time.

740

severe (740): GET argument to RANDOM_SEED is too small

FOR$IOS_F6785. The integer array GET must be greater than or equal to the number of integers the processor uses to set the seed value. This number can be determined by calling RANDOM_SEED with the SIZE argument. For example:

  INTEGER, ALLOCATABLE SEED
  CALL RANDOM_SEED( )           ! initialize processor
  CALL RANDOM_SEED(SIZE = K)    ! get size of seed
  ALLOCATE SEED(K)              ! allocate array
  CALL RANDOM_SEED(GET = SEED)  ! get the seed

NOTE:

RANDOM_SEED can be called with at most one argument at a time.

741

severe (741): Recursive I/O reference

FOR$IOS_F6786.

742

severe (742): Argument to SHAPE intrinsic is not PRESENT

FOR$IOS_F6787.

743

severe (743): Out of range: DIM argument to UBOUND had value "dim"

FOR$IOS_F6788. The optional argument DIM specifies the dimension whose upper bound is to be returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

744

severe (744): DIM argument ("dim") to UBOUND greater than ARRAY rank "rank"

FOR$IOS_F6789. The optional argument DIM specifies the dimension whose upper bound is to be returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

745

severe (745): Out of range: UBOUND of assumed-size array with DIM==rank ("rank")

FOR$IOS_F6790. The optional argument DIM specifies the dimension whose upper bound is to be returned.

An assumed-size array is a dummy argument in a subroutine or function, and the upper bound of its last dimension is determined by the size of actual array passed to it. Assumed-size arrays have no determined shape, and you cannot use UBOUND to determine the extent of the last dimension. You can use UBOUND to determine the upper bound of one of the fixed dimensions, in which case you must pass the dimension number along with the array name.

746

severe (746): Out of range: DIM argument ("dim") to UBOUND greater than ARRAY rank

FOR$IOS_F6791. The optional argument DIM specifies the dimension whose upper bound is to be returned, and must be greater than or equal to 1 and less than or equal to the number of dimensions (rank) in the array. That is, 1 <= DIM <= "n", where "n" is the number of dimensions in array.

747

severe (747): Shape mismatch: Dimension "shape" extents are "ext1" and "ext2"

FOR$IOS_F6792.

748

severe (748): Illegal POSITION value

FOR$IOS_F6793. An illegal value was used with the POSITION specifier.

POSITION accepts the following values:

  • 'ASIS' (the default)

  • 'REWIND' - on Fortran I/O systems, this is the same as 'ASIS'

  • 'APPEND'

749

severe (749): Illegal ACTION value

FOR$IOS_F6794. An illegal value was used with the ACTION specifier.

ACTIO accepts the following values:

  • 'READ'

  • 'WRITE'

  • 'READWRITE' - the default

750

severe (750): DELIM= specifier not allowed for an UNFORMATTED file

FOR$IOS_F6795. The DELIM specifier is only allowed for files connected for formatted data transfer. It is used to delimit character constants in list-directed an namelist output.

751

severe (751): Illegal DELIM value

FOR$IOS_F6796. An illegal value was used with the DELIM specifier.

DELIM accepts the following values:

  • 'APOSTROPHE'

  • 'QUOTE'

  • 'NONE' - the default

752

severe (752): PAD= specifier not allowed for an UNFORMATTED file

FOR$IOS_F6797. The PAD specifier is only allowed for formatted input records. It indicates whether the formatted input record is padded with blanks when an input list and format specification requires more data than the record contains.

753

severe (753): Illegal PAD= value

FOR$IOS_F6798. An illegal value was used with the PAD specifier.

PAD accepts the following values:

  • 'NO'

  • 'YES' - the default

754

severe (754): Illegal CARRIAGECONTROL=value

FOR$IOS_F6799. An illegal value was used with the CARRIAGECONTROL specifier.

CARRIAGECONTROL accepts the following values:

  • 'FORTRAN' - default if the unit is connected to a terminal or console

  • 'LIST' - default for formatted files

  • 'NONE' - default for unformatted files

755

severe (755): SIZE= specifier only allowed with ADVANCE='NO'

FOR$IOS_F6800. The SIZE specifier can only appear in a formatted, sequential READ statement that has the specifier ADVANCE='NO' (indicating non-advancing input).

756

severe (756): Illegal character in binary input

FOR$IOS_F6801.

757

severe (757): Illegal character in octal input

FOR$IOS_F6802.

758

severe (758): End of record encountered

FOR$IOS_F6803.

759

severe (759): Illegal subscript in namelist input record

FOR$IOS_F6804.

760

severe (760): Error reported by 'EnumSystemLocales'

FOR$IOS_ LOCALE_ENUM_ERR.

761

severe (761): Cannot set environment variable "string"

FOR$IOS_ENV_VAR_SET_ERR.

762

info (762): Error freeing internal data structure.

FOR$IOS_IMPL_MEM_ERR.

763

severe (763): SIZE specifier must be integer type

FOR$IOS_SIZEBADTYPE.

764

info (764): PAD= specifier not allowed with 'f77rtl'

FOR$IOS_F77NOPAD.

765

warning (765): Destination string too small for result

FOR$IOS_DSTTOOSMALL.

766

info (766): Empty arg in retrieved command

FOR$IOS_ARGCERR.

767

warning (767): Environment variable is not defined

FOR$IOS_NOSUCHVAR.

768

warning (768): Internal file write-to-self; undefined results

FOR$IOS_WRITE_TO_SELF.

769

warning (769): RECL value must be a positive number

FOR$IOS_BAD_RECL_VAL.

770

warning (770): File-path is longer than Windows limit of 260

FOR$IOS_WINPATHLIM.

771

severe (771): A SYNC ALL statement could not perform a synchronization of all images

FOR$IOS_SYNC_ALL_ERR.

772

severe (772): Image number "number" is not a valid image number; valid numbers are 1 to "number"

FOR$IOS_IMAGE_OUT_OF_RANGE. A reference has been made to an image number that is not a valid image number.

774

severe (774): Image-set array expression must not contain repeated values

FOR$IOS_IMG_SET_REPEATED. A SYNC IMAGES <image-list> statement was attempted. The <image-list> contains duplicate values. This is not permitted by the standard.

775

severe (775): The lock variable in a LOCK statement is already locked by the executing image

FOR$IOS_LC_VAR_IS_LOCKED. An attempt was made to use a LOCK statement on a lock. However, that lock has already been locked by this image.

776

severe (776): The lock variable in an UNLOCK statement is not already locked by the executing image

FOR$IOS_LC_VAR_NOT_LOCKED. An attempt was made to use an UNLOCK statement on a lock. However, that lock is currently unlocked; it has not been locked by this image.

777

severe (777): The lock variable in a LOCK statement is already locked by another image

FOR$IOS_LC_VAR_LOCKED_OTHER_IMAGE. An attempt was made to use a LOCK statement on a lock. However, that lock is already locked by another image.

778

severe (778): One of the images to be synchronized with has terminated

FOR$IOS_LC_STOPPED_IMAGE. The code has tried to synchronize with a set of images using a SYNC statement. One of the images to be synchronized with has already terminated.

779

info (779): In coarray image "number"

FOR$IOS_FORRTL_IMAGE_IS. This is issued as part of the stack traceback from a fatal error. The image listed is the one in which the error happened.

780

severe (780): The lock variable in an UNLOCK statement is locked by another image

FOR$IOS_LC_VAR_UNLOCKED_OTHER_IMAGE. An attempt was made to use a coarray UNLOCK operation on a lock. However, that lock is locked by another image.

This may be the result of an error in the program that causes the code to think it has a lock when it does not.

781

error (781): Only image 1 may read from unit '*'

FOR$IOS_ONLY_IMAGE_L_IO. It is a coarray rule that only image 1 may read from the 'console'.

782

severe (782): One of the images to be synchronized with has failed

FOR$IOS_LC_FAILED_IMAGE. A BARRIER operation was performed and one of the images failed; the barrier completed with the remaining images.

783

severe (783): The lock variable in an UNLOCK statement is locked by a failed image

FOR$IOS_LC_UNLOCK_FAILED_IMAGE. The UNLOCK has failed.

784

error (784): EOR= must not be specified when the specifier ADVANCE='YES' also appears

FOR$IOS_EOR_ADVANCE.

785

warning (785): File-path is longer than Intel(r) Fortran limit of 4096

FOR$IOS_FTNPATHLIM.

787

warning (787): Possible security issue: GetSystemDirectory call failed

FOR$IOS_NO_SYS_DIR. The cmd.exe used is not the one in the system directory.

Footnotes:

1 Identifies errors not returned by IOSTAT.