Cyclone® V to Agilex™ 5 Device Migration Guide

Download PDF
ID 787947
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Device Migration Considerations 3. Intel Quartus Prime and Platform Designer Migration Guidelines 4. Example: Design Migration from Cyclone® V to Intel Agilex® 5 Device A. Document Revision History for Cyclone® V to Agilex™ 5 Device Migration Guide
2. Device Migration Considerations x
2.1. Device Footprint 2.2. Power Management 2.3. Configuration 2.4. Design Security Differences 2.5. Logic Elements and Embedded Memory 2.6. PLL and Clock Network 2.7. Digital Signal Processing (DSP) 2.8. I/O Interfaces 2.9. LVDS SERDES Interface 2.10. Sensor Monitoring System 2.11. MIPI D-PHY Interface 2.12. External Memory Interface (EMIF) 2.13. Hard Processor System (HPS) 2.14. Transceiver and Serial Protocols 2.15. PCIe Interface 2.16. Ethernet Interface
2.3. Configuration x
2.3.1. General Configuration Pin and Sequences 2.3.2. Device Configuration and the Secure Device Manager (SDM) 2.3.3. Active Serial (AS) Configuration 2.3.4. Avalon® -ST Configuration 2.3.5. JTAG Configuration 2.3.6. Configuration via Protocol (CvP) 2.3.7. QSPI Flash Access and Remote System Upgrade Feature 2.3.8. SEU Features 2.3.9. Configuration File Format Differences
2.8. I/O Interfaces x
2.8.1. HSIO Bank 2.8.2. HPS I/O Bank 2.8.3. SDM I/O Bank 2.8.4. HVIO Bank
2.13. Hard Processor System (HPS) x
2.13.1. HPS Boot Flows
2.14. Transceiver and Serial Protocols x
2.14.1. PMA Architecture 2.14.2. PCS Architecture 2.14.3. Transceiver Clocking 2.14.4. Transceiver Reset
3. Intel Quartus Prime and Platform Designer Migration Guidelines x
3.1. Overview 3.2. IP Comparison Between Cyclone® V and Agilex™ 5 Devices 3.3. Upgrading IP Cores and Platform Designer Systems 3.4. RTL Compliance
3.3. Upgrading IP Cores and Platform Designer Systems x
3.3.1. Upgrading IP Cores via Quartus® Prime Software Project 3.3.2. Upgrading IP Cores in Platform Designer 3.3.3. Migrating IP Cores to a Different Device
4. Example: Design Migration from Cyclone® V to Intel Agilex® 5 Device x
4.1. Prerequisites 4.2. Downloading and Extracting the Design Example 4.3. Migrating the Design Example
4.3. Migrating the Design Example x
4.3.1. Restoring an Archived Cyclone® V Design in the QAR Format 4.3.2. Specifying an Agilex™ 5 Device 4.3.3. Upgrading IP Cores 4.3.4. Establishing Connections 4.3.5. Compiling the Design
1. Overview
2. Device Migration Considerations
3. Intel Quartus Prime and Platform Designer Migration Guidelines
4. Example: Design Migration from Cyclone® V to Intel Agilex® 5 Device
A. Document Revision History for Cyclone® V to Agilex™ 5 Device Migration Guide

2.14.2. PCS Architecture

The Physical Coding Sublayer (PCS) architecture has evolved in the Agilex™ 5 device as it no longer supports the fundamental PCS block, such as 8b/10b encoder/decoder, byte SERDES, TX bit-slip block, word-aligner block, and rate-match first-in-first-out (FIFO) block.

The following table lists the key differences in TX and RX PCS features of Cyclone® V and Agilex™ 5 devices:

Table 26.  TX and RX PCS Architecture Differences
PCS Datapath Cyclone® V Agilex™ 5
TX
Double Width Mode Single and double width Single and double width
TX Phase Comp FIFO With PLD Interface Supported

(Register and Elastic mode)

 Supported

(Elastic and Phase-compensation FIFO mode)

PMA Interface FIFO Not supported Supported

(Register and Elastic FIFO mode)

8b/10b Encoding Supported Not supported. Implement with soft logic as an alternative solution if this feature is required
Running Disparity and Control Code Encoding Supported Not supported. Implement with soft logic as an alternative solution if this feature is required.
Scramble Not supported Supported
Gearbox Not supported Supported
64/66 Encoding Not supported Supported
 
RX
Double Width Mode Single and double width Single and double width
RX Phase Comp FIFO with PLD Interface Supported

(register and phase-compensation mode)

Supported

(Elastic and Phase-compensation FIFO mode)

PMA Interface FIFO Not supported Supported

(Register and Elastic FIFO mode)

8b/10b Decoding Supported Not supported. Implement with soft logic as an alternative solution if this feature is required.
Block alignment Supported Supported
Descramble Not supported Supported
64b/66b Decoding Not supported Supported
Related Information
Level Two Title