L-Tile and H-Tile Avalon® Memory-mapped Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683667
Date 9/13/2024
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Quick Start Guide 3. Interface Overview 4. Parameters 5. Designing with the IP Core 6. Block Descriptions 7. Registers 8. Programming Model for the DMA Descriptor Controller 9. Programming Model for the Avalon® -MM Root Port 10. Avalon-MM Testbench and Design Example 11. Document Revision History A. PCI Express Core Architecture B. Root Port Enumeration C. Troubleshooting and Observing the Link Status
1. Introduction x
1.1. Avalon-MM Interface for PCIe 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Recommended Fabric Speed Grades 1.6. Performance and Resource Utilization 1.7. Transceiver Tiles 1.8. PCI Express IP Core Package Layout 1.9. Channel Availability
2. Quick Start Guide x
2.1. Design Components 2.2. Hardware and Software Requirements 2.3. Directory Structure 2.4. Generating the Design Example 2.5. Simulating the Design Example 2.6. Compiling the Design Example and Programming the Device 2.7. Installing the Linux Kernel Driver 2.8. Running the Design Example Application
3. Interface Overview x
3.1. Avalon-MM DMA Interfaces when Descriptor Controller Is Internally Instantiated 3.2. Avalon-MM DMA Interfaces when Descriptor Controller is Externally Instantiated 3.3. Other Avalon-MM Interfaces 3.4. Clocks and Reset 3.5. System Interfaces
3.3. Other Avalon-MM Interfaces x
3.3.1. Avalon-MM Master Interfaces 3.3.2. Avalon-MM Slave Interfaces 3.3.3. Control Register Access (CRA) Avalon-MM Slave
4. Parameters x
4.1. Avalon-MM Settings 4.2. Base Address Registers 4.3. Device Identification Registers 4.4. PCI Express and PCI Capabilities Parameters 4.5. Configuration, Debug and Extension Options 4.6. PHY Characteristics 4.7. Example Designs
4.4. PCI Express and PCI Capabilities Parameters x
4.4.1. Device Capabilities 4.4.2. Link Capabilities 4.4.3. MSI and MSI-X Capabilities 4.4.4. Slot Capabilities 4.4.5. Power Management 4.4.6. Vendor Specific Extended Capability (VSEC)
5. Designing with the IP Core x
5.1. Generation 5.2. Simulation 5.3. IP Core Generation Output ( Quartus® Prime Pro Edition) 5.4. Channel Layout and PLL Usage
6. Block Descriptions x
6.1. Interfaces
6.1. Interfaces x
6.1.1. Stratix® 10 DMA Avalon-MM DMA Interface to the Application Layer 6.1.2. Avalon-MM Interface to the Application Layer 6.1.3. Clocks and Reset 6.1.4. Interrupts 6.1.5. Flush Requests 6.1.6. Serial Data, PIPE, Status, Reconfiguration, and Test Interfaces
6.1.1. Stratix® 10 DMA Avalon-MM DMA Interface to the Application Layer x
6.1.1.1. Descriptor Controller Interfaces when Instantiated Internally 6.1.1.2. Write DMA Avalon-MM Master Port 6.1.1.3. Descriptor Controller Interfaces when Instantiated Externally
6.1.1.1. Descriptor Controller Interfaces when Instantiated Internally x
6.1.1.1.1. Read Data Mover 6.1.1.1.2. Read Descriptor Controller Avalon-MM Master interface 6.1.1.1.3. Write Descriptor Controller Avalon-MM Master Interface 6.1.1.1.4. Read Descriptor Table Avalon-MM Slave Interface 6.1.1.1.5. Write Descriptor Table Avalon-MM Slave Interface
6.1.1.3. Descriptor Controller Interfaces when Instantiated Externally x
6.1.1.3.1. Avalon® -ST Descriptor Source
6.1.2. Avalon-MM Interface to the Application Layer x
6.1.2.1. Bursting and Non-Bursting Avalon® -MM Module Signals 6.1.2.2. Non-Bursing Slave Module 6.1.2.3. 32-Bit Control Register Access (CRA) Slave Signals 6.1.2.4. Bursting Slave Module
6.1.3. Clocks and Reset x
6.1.3.1. Clocks 6.1.3.2. Resets
6.1.4. Interrupts x
6.1.4.1. MSI Interrupts for Endpoints 6.1.4.2. Legacy Interrupts
6.1.6. Serial Data, PIPE, Status, Reconfiguration, and Test Interfaces x
6.1.6.1. Serial Data Interface 6.1.6.2. PIPE Interface 6.1.6.3. Hard IP Status Interface 6.1.6.4. Hard IP Reconfiguration 6.1.6.5. Test Interface
7. Registers x
7.1. Configuration Space Registers 7.2. Avalon-MM DMA Bridge Registers
7.1. Configuration Space Registers x
7.1.1. Register Access Definitions 7.1.2. PCI Configuration Header Registers 7.1.3. PCI Express Capability Structures 7.1.4. Intel Defined VSEC Capability Header 7.1.5. Uncorrectable Internal Error Status Register 7.1.6. Uncorrectable Internal Error Mask Register 7.1.7. Correctable Internal Error Status Register 7.1.8. Correctable Internal Error Mask Register
7.1.4. Intel Defined VSEC Capability Header x
7.1.4.1. Intel Defined Vendor Specific Header 7.1.4.2. Intel Marker 7.1.4.3. JTAG Silicon ID 7.1.4.4. User Configurable Device and Board ID
7.2. Avalon-MM DMA Bridge Registers x
7.2.1. PCI Express Avalon-MM Bridge Register Address Map 7.2.2. DMA Descriptor Controller Registers
7.2.1. PCI Express Avalon-MM Bridge Register Address Map x
7.2.1.1. Avalon-MM to PCI Express Interrupt Status Registers 7.2.1.2. Avalon-MM to PCI Express Interrupt Enable Registers 7.2.1.3. Address Mapping for High-Performance Avalon-MM 32-Bit Slave Modules 7.2.1.4. PCI Express to Avalon-MM Interrupt Status and Enable Registers for Endpoints 7.2.1.5. PCI Express Configuration Information Registers
7.2.2. DMA Descriptor Controller Registers x
7.2.2.1. Read DMA Internal Descriptor Controller Registers 7.2.2.2. Write DMA Internal Descriptor Controller Registers
8. Programming Model for the DMA Descriptor Controller x
8.1. Read DMA Example 8.2. Write DMA Example 8.3. Software Program for Simultaneous Read and Write DMA 8.4. Read DMA and Write DMA Descriptor Format
9. Programming Model for the Avalon® -MM Root Port x
9.1. Root Port TLP Data Control and Status Registers 9.2. Sending a TLP 9.3. Receiving a Non-Posted Completion TLP 9.4. Example of Reading and Writing BAR0 Using the CRA Interface
10. Avalon-MM Testbench and Design Example x
10.1. Avalon-MM Endpoint Testbench 10.2. Endpoint Design Example 10.3. Avalon® -MM Test Driver Module 10.4. Root Port BFM 10.5. BFM Procedures and Functions
10.2. Endpoint Design Example x
10.2.1. BAR Setup
10.4. Root Port BFM x
10.4.1. Overview 10.4.2. Issuing Read and Write Transactions to the Application Layer 10.4.3. Configuration of Root Port and Endpoint 10.4.4. Configuration Space Bus and Device Numbering 10.4.5. BFM Memory Map
10.5. BFM Procedures and Functions x
10.5.1. ebfm_barwr Procedure 10.5.2. ebfm_barwr_imm Procedure 10.5.3. ebfm_barrd_wait Procedure 10.5.4. ebfm_barrd_nowt Procedure 10.5.5. ebfm_cfgwr_imm_wait Procedure 10.5.6. ebfm_cfgwr_imm_nowt Procedure 10.5.7. ebfm_cfgrd_wait Procedure 10.5.8. ebfm_cfgrd_nowt Procedure 10.5.9. BFM Configuration Procedures 10.5.10. BFM Shared Memory Access Procedures 10.5.11. BFM Log and Message Procedures 10.5.12. Verilog HDL Formatting Functions
10.5.9. BFM Configuration Procedures x
10.5.9.1. ebfm_cfg_rp_ep Procedure 10.5.9.2. ebfm_cfg_decode_bar Procedure
10.5.10. BFM Shared Memory Access Procedures x
10.5.10.1. Shared Memory Constants 10.5.10.2. shmem_write Task 10.5.10.3. shmem_read Function 10.5.10.4. shmem_display Verilog HDL Function 10.5.10.5. shmem_fill Procedure 10.5.10.6. shmem_chk_ok Function
10.5.11. BFM Log and Message Procedures x
10.5.11.1. ebfm_display Verilog HDL Function 10.5.11.2. ebfm_log_stop_sim Verilog HDL Function 10.5.11.3. ebfm_log_set_suppressed_msg_mask Task 10.5.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 10.5.11.5. ebfm_log_open Verilog HDL Function 10.5.11.6. ebfm_log_close Verilog HDL Function
10.5.12. Verilog HDL Formatting Functions x
10.5.12.1. himage1 10.5.12.2. himage2 10.5.12.3. himage4 10.5.12.4. himage8 10.5.12.5. himage16 10.5.12.6. dimage1 10.5.12.7. dimage2 10.5.12.8. dimage3 10.5.12.9. dimage4 10.5.12.10. dimage5 10.5.12.11. dimage6 10.5.12.12. dimage7
11. Document Revision History x
11.1. Document Revision History for the L-Tile and H-Tile Avalon® Memory-mapped Intel® FPGA IP for PCI Express* User Guide
A. PCI Express Core Architecture x
A.1. Transaction Layer A.2. Data Link Layer A.3. Physical Layer
C. Troubleshooting and Observing the Link Status x
C.1. Troubleshooting C.2. PCIe Link Inspector Overview
C.1. Troubleshooting x
C.1.1. Simulation Fails To Progress Beyond Polling.Active State C.1.2. Hardware Bring-Up Issues C.1.3. Link Training C.1.4. Use Third-Party PCIe Analyzer
C.2. PCIe Link Inspector Overview x
C.2.1. PCIe* Link Inspector Hardware
C.2.1. PCIe* Link Inspector Hardware x
C.2.1.1. Enabling the PCIe* Link Inspector C.2.1.2. Launching the PCIe* Link Inspector C.2.1.3. The PCIe* Link Inspector LTSSM Monitor C.2.1.4. Accessing the Configuration Space and Transceiver Registers C.2.1.5. Additional Status Commands
C.2.1.3. The PCIe* Link Inspector LTSSM Monitor x
C.2.1.3.1. LTSSM Monitor Registers C.2.1.3.2. ltssm_save2file <file_name> C.2.1.3.3. ltssm_file2console C.2.1.3.4. ltssm_debug_check C.2.1.3.5. ltssm_display <num_states> C.2.1.3.6. ltssm_save_oldstates
C.2.1.4. Accessing the Configuration Space and Transceiver Registers x
C.2.1.4.1. PCIe* Link Inspector Commands C.2.1.4.2. NPDME PLL and Channel Commands C.2.1.4.3. Register Address Map
C.2.1.5. Additional Status Commands x
C.2.1.5.1. Displaying PLL Lock and Calibration Status Registers
1. Introduction
2. Quick Start Guide
3. Interface Overview
4. Parameters
5. Designing with the IP Core
6. Block Descriptions
7. Registers
8. Programming Model for the DMA Descriptor Controller
9. Programming Model for the Avalon® -MM Root Port
10. Avalon-MM Testbench and Design Example
11. Document Revision History
A. PCI Express Core Architecture
B. Root Port Enumeration
C. Troubleshooting and Observing the Link Status

4.1. Avalon-MM Settings

Table 15.  Avalon-MM Settings
Parameter Value Description
Avalon-MM address width

32-bit

64-bit

Specifies the address width for Avalon-MM RX master ports that access Avalon-MM slaves in the Avalon address domain.

When you select Enable Avalon-MM DMA or Enable non-bursting Avalon-MM slave interface with individual byte access (TXS), this value must be set to 64.

Enable Avalon-MM DMA On/Off When On, the IP core includes Read DMA and Write DMA data movers.
Instantiate internal descriptor controller Enabled/Disabled

When On, the descriptor controller is included in the Avalon-MM DMA bridge. When Off, the descriptor controller should be included as a separate external component, if required. The internal descriptor controller does not support Root Port mode.

Enable control register access (CRA) Avalon-MM slave port On/Off

Allows read and write access to Avalon-MM bridge registers from the interconnect fabric using a specialized slave port. This option is required for Requester/Completer variants and optional for Completer Only variants. Enabling this option allows read and write access to Avalon® -MM bridge registers, except in the Completer‑Only single DWORD variations.

Export interrupt conduit interfaces On/Off When On, the IP core exports internal interrupt signals to the top-level RTL module. The exported signals support MSI, MSI-X, and legacy interrupts.
Enable hard IP status bus when using the Avalon-MM interface On/Off When you turn this option On, your top-level variant includes signals that are useful for debugging, including link training and status, and error signals. The following signals are included in the top-level variant:
  • Link status signals
  • ECC error signals
  • LTSSM signals
  • Configuration parity error signal
Enable non-bursting Avalon-MM Slave interface with individual byte access (TXS) On/Off When On, the non-bursting Avalon-MM slave interface is enabled. This interface is appropriate for low bandwidth applications such as accessing control and status registers.
Address width of accessible PCIe memory space (TXS) 22-64 Specifies the number of bits necessary to access the PCIe address space. (This parameter only displays when the TXS slave is enabled.)
Enable high performance bursting Avalon-MM Slave interface (HPTXS) On/Off When On, the high performance Avalon-MM slave interface is enabled. This interface is appropriate for high bandwidth applications such as transferring blocks of data.
Enable mapping (HPTXS) On/Off

Address mapping for 32-bit Avalon-MM slave devices allows system software to specify non-contiguous address pages in the PCI Express address domain. All high performance 32-bit Avalon-MM slave devices are mapped to the 64-bit PCI Express address space. The Avalon-MM Settings tab of the component GUI allows you to select the number and size of address mapping pages.

Up to 10 address mapping pages are supported. The minimum page size is 4 KB. The maximum page size is 4 GB.

When you enable address mapping, the slave address bus width is just large enough to fit the required address mapping pages. When address mapping is disabled, the Avalon-MM slave address bus is set to 64 bits. The Avalon-MM addresses are used as is in the resulting PCIe TLPs.

Address width of accessible PCIe memory space (TXS) 22-64 Specifies the number of bits necessary to access the PCIe address space. (This parameter only displays when the HPTXS slave is enabled.)
Number of address pages (HPTXS) 1-512 pages Specifies the number of pages available for address translation tables. Refer to Address Mapping for High-Performance Avalon-MM 32-Bit Slave Modules for more information about address mapping.
Related Information
Level Two Title