Visible to Intel only — GUID: gpd1673421598679
Ixiasoft
1. Agilex™ 5 Clocking and PLL Overview
2. Agilex™ 5 Clocking and PLL Architecture and Features
3. Agilex™ 5 Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. I/O PLL Reconfiguration
7. Document Revision History for the Clocking and PLL User Guide: Agilex™ 5 FPGAs and SoCs
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Locations
2.2.4. PLL Architecture
2.2.5. PLL Control Signals
2.2.6. PLL Feedback Modes
2.2.7. Clock Multiplication and Division
2.2.8. Programmable Phase Shift
2.2.9. Programmable Duty Cycle
2.2.10. PLL Cascading
2.2.11. PLL Input Clock Switchover
2.2.12. PLL Reconfiguration and Dynamic Phase Shift
2.2.13. PLL Calibration
3.1. Guidelines: Clock Switchover
3.2. Guidelines: Timing Closure
3.3. Guidelines: Resetting the PLL
3.4. Guidelines: Configuration Constraints
3.5. Clocking Constraints
3.6. IP Core Constraints
3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
6.1. Release Information for EMIF Calibration IP
6.2. Implementing HSIO I/O PLL Reconfiguration using EMIF Calibration IP
6.3. Implementing HVIO I/O PLL Reconfiguration
6.4. Reconfiguration Guideline for I/O PLLs
6.5. Axilite Interface Ports in the EMIF Calibration IP
6.6. Address Bus and Data Bus Settings
Visible to Intel only — GUID: gpd1673421598679
Ixiasoft
2.1.2. Clock Resources
Number of Resources Available | Source of Clock Resource |
---|---|
32 pairs of unidirectional programmable clock routing at the boundary of each clock sector | For transceiver bank:
For I/O bank: |
For more information about the clock input pins connections, refer to the pin connection guidelines.
1 Core signals drive directly to programmable clock routing through clock switch multiplexers in the clock sectors instead of the periphery DCM block.
2 This is dedicated clock sources for SERDES circuitry.