AN 307: Intel® FPGA Design Flow for Xilinx* Users

Download PDF
ID 683562
Date 2/25/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users 2. Technology Comparison 3. FPGA Tools Comparison 4. Xilinx* to Intel® FPGA Design Conversion 5. Conclusion 6. AN 307: Intel® FPGA Design Flow for Xilinx* Users Archives 7. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison x
2.1. Intel® FPGA and SoC Devices 2.2. Intel® - Xilinx* Device Comparison 2.3. Intel® FPGA Device Features
3. FPGA Tools Comparison x
3.1. Hardware and Software Tools for FPGA Design 3.2. FPGA Design Flow Using Command Line Scripting 3.3. FPGA Design Flow Using Tools with GUIs 3.4. Additional Intel® Quartus® Prime Pro Edition Features
3.2. FPGA Design Flow Using Command Line Scripting x
The Hyper-Aware Design Flow 3.2.1. Command-Line Executable Equivalents 3.2.2. Programming and Configuration File Support in the Intel® Quartus® Prime Pro Edition Software
3.2.1. Command-Line Executable Equivalents x
3.2.1.1. synth_design 3.2.1.2. place_design/route_design 3.2.1.3. report_timing 3.2.1.4. write_bitstream 3.2.1.5. write_sdf/write_verilog/write_vhdl 3.2.1.6. report_power 3.2.1.7. write_checkpoint 3.2.1.8. Run Complete Design Flow
3.3. FPGA Design Flow Using Tools with GUIs x
3.3.1. Project Creation 3.3.2. Design Entry 3.3.3. IP Status 3.3.4. Design Constraints 3.3.5. Synthesis 3.3.6. Design Implementation 3.3.7. Finalize Pinout 3.3.8. Viewing and Editing Design Placement 3.3.9. Static Timing Analysis 3.3.10. Generation of Device Programming Files 3.3.11. Power Analysis 3.3.12. Simulation 3.3.13. Hardware Verification 3.3.14. View Netlist 3.3.15. Design Optimization 3.3.16. Techniques to Improve Productivity 3.3.17. Partial Reconfiguration 3.3.18. Cross-Probing in the Intel® Quartus® Prime Pro Edition Software
3.3.2. Design Entry x
3.3.2.1. HDL Editor 3.3.2.2. Schematic/Block Editor 3.3.2.3. State Machine Editor 3.3.2.4. IP Catalog and Parameter Editor 3.3.2.5. Platform Designer System Integration Tool 3.3.2.6. Platform Designer Component Editor
3.3.4. Design Constraints x
3.3.4.1. Assignment Editor 3.3.4.2. Create Timing Constraints with the Timing Analyzer GUI 3.3.4.3. Create Timing Constraints with the Timing Analyzer Text Editor
3.3.7. Finalize Pinout x
3.3.7.1. Pin Planner 3.3.7.2. Interface Planner 3.3.7.3. Tile Interface Planner
3.3.12. Simulation x
3.3.12.1. Simulation Models for Designs Containing LPMs or IP Cores
3.3.13. Hardware Verification x
3.3.13.1. System Console 3.3.13.2. Signal Tap Logic Analyzer 3.3.13.3. In-System Sources and Probes 3.3.13.4. Toolkit Explorer 3.3.13.5. Remote Debugging 3.3.13.6. Other Intel® FPGA Debugging Tools
3.3.13.4. Toolkit Explorer x
3.3.13.4.1. Transceiver Toolkit 3.3.13.4.2. EMIF Debug Toolkit
3.3.14. View Netlist x
3.3.14.1. RTL Viewer 3.3.14.2. Technology Map Viewer
3.3.15. Design Optimization x
3.3.15.1. Hyper-Aware Design Flow 3.3.15.2. Physical Synthesis Optimization 3.3.15.3. Optimization Modes 3.3.15.4. Fractal Synthesis
3.3.16. Techniques to Improve Productivity x
3.3.16.1. Fast Preservation 3.3.16.2. Engineering Change Order (ECO) Flow 3.3.16.3. Block-Based Design Flow 3.3.16.4. Design Assistant 3.3.16.5. Snapshot Viewer 3.3.16.6. Design Space Explorer II
3.4. Additional Intel® Quartus® Prime Pro Edition Features x
3.4.1. Scripting with Tcl in the Intel® Quartus® Prime Pro Edition Software
3.4.1. Scripting with Tcl in the Intel® Quartus® Prime Pro Edition Software x
3.4.1.1. Running Scripts from the DOS or UNIX Prompt 3.4.1.2. Running Scripts in Batch Mode from a Shell 3.4.1.3. Running Tcl Commands Directly from the Command Line 3.4.1.4. Running Tcl Commands Interactively from the Shell 3.4.1.5. The Intel® Quartus® Prime Tcl Console Window
4. Xilinx* to Intel® FPGA Design Conversion x
4.1. Replacing Xilinx* Primitives 4.2. Converting IP Cores 4.3. Setting Equivalent Xilinx* Design Constraints 4.4. Setting Up the Simulation Environment
4.1. Replacing Xilinx* Primitives x
4.1.1. Converting I/O Buffers 4.1.2. Changing Default I/O Standard for Pins 4.1.3. Converting Registers
4.1.1. Converting I/O Buffers x
4.1.1.1. Example of Converting I/O Buffer
4.2. Converting IP Cores x
4.2.1. Converting Memory Blocks 4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) 4.2.3. Converting Multipliers
4.2.1. Converting Memory Blocks x
4.2.1.1. Embedded Memory Blocks 4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory 4.2.1.3. Determining Memory Block and Mapping Ports 4.2.1.4. Memory Port Mapping 4.2.1.5. Example: Converting Simple Dual-Port RAM
4.2.1.2. Differences Between Xilinx* Memory and Intel® FPGA Memory x
4.2.1.2.1. Memory Mode 4.2.1.2.2. Clocking Mode 4.2.1.2.3. Write and Read Operation Triggering 4.2.1.2.4. Read-During-Write Operation at the Same Address 4.2.1.2.5. Error Correction Code (ECC) 4.2.1.2.6. Byte Enable 4.2.1.2.7. Address Clock Enable 4.2.1.2.8. Parity Bit Support 4.2.1.2.9. Memory Initialization 4.2.1.2.10. Output Synchronous Set/Reset
4.2.2. Converting Mixed-Mode Clock Manager (MMCM) to Phase-Locked Loop (PLL) x
4.2.2.1. Feature Comparison 4.2.2.2. Port Mapping Reference 4.2.2.3. Example: Converting Xilinx* MMCM into an Intel® PLL
4.2.3. Converting Multipliers x
4.2.3.1. Feature Comparison 4.2.3.2. Port Mapping 4.2.3.3. Example: Converting to the LPM_MULT IP Core 4.2.3.4. Example: Converting to the Intel® FPGA Multiply Adder IP core
4.3. Setting Equivalent Xilinx* Design Constraints x
4.3.1. Device Constraints 4.3.2. Placement Constraints 4.3.3. Timing Constraints 4.3.4. Retimer Constraints
4.3.1. Device Constraints x
4.3.1.1. DRIVE 4.3.1.2. SLEW 4.3.1.3. IOB 4.3.1.4. IOSTANDARD 4.3.1.5. KEEP
4.3.2. Placement Constraints x
4.3.2.1. PBLOCK 4.3.2.2. PACKAGE_PIN 4.3.2.3. LOC & BEL 4.3.2.4. PROHIBIT
4.3.2.1. PBLOCK x
4.3.2.1.1. Differences Between PBLOCK and Logic Lock Regions
4.3.3. Timing Constraints x
4.3.3.1. Clock Domain Crossing
4.4. Setting Up the Simulation Environment x
4.4.1. Simulation Levels 4.4.2. HDL Support for EDA Simulators 4.4.3. Value Change Dump (VCD) Support 4.4.4. Simulating Intel FPGA IP Cores
1. Introduction to Intel® FPGA Design Flow for Xilinx* Users
2. Technology Comparison
3. FPGA Tools Comparison
4. Xilinx* to Intel® FPGA Design Conversion
5. Conclusion
6. AN 307: Intel® FPGA Design Flow for Xilinx* Users Archives
7. Document Revision History for Intel® FPGA Design Flow for Xilinx* Users

3.2. FPGA Design Flow Using Command Line Scripting

Automating the FPGA design process saves time and increases productivity. The Vivado* software and the Intel® Quartus® Prime Pro Edition software provide the tools necessary to automate your FPGA design flow.

The compilation flow is the sequence and methods by which the software translates design files, maps the translated design to device-specific elements, places and routes the design in the device, and generates programming files. The Intel® Quartus® Prime Pro Edition software performs these functions through stages such as Analysis and Synthesis, Fitter, Assembler, and Timing Analyzer. If you are familiar with the command-line flow in the Vivado* software, you can detect parallels with the Intel® Quartus® Prime Pro Edition software.

The following figure shows the typical stages of the compilation flow and the corresponding Xilinx* Vivado* and Intel® FPGA Intel® Quartus® Prime Pro Edition command line instructions for each stage.

Figure 1. Basic Design Flow Stages and Command Line Instructions

The Hyper-Aware Design Flow

The Hyper-Aware Design Flow allows you to take full advantage of the Intel® Hyperflex™ architecture provided on Intel® Agilex™ and Intel® Stratix® 10 devices. This flow combines automated register retiming (Hyper-Retiming), with implementation of target timing closure recommendations (Fast Forward compilation), to maximize use of Hyper-Registers and drive the highest performance for your Intel® Agilex™ and Intel® Stratix® 10 designs:

  • Hyper-Retiming:

    A key innovation of the Intel® Hyperflex™ architecture is the addition of multiple Hyper- Registers in every routing segment and block input. Maximizing the use of Hyper-Registers improves design performance. The prevalence of Hyper-Registers improves balance of time delays between registers and mitigates critical path delays.

  • Fast Forward Compilation:

    If you require optimization beyond Hyper-Retiming, run Fast Forward compilation to generate timing closure recommendations that break key performance bottlenecks. Fast Forward compilation shows precisely where to make the most impact with RTL changes, and reports the performance benefits you can expect from each change.


Section Content
Command-Line Executable Equivalents
Programming and Configuration File Support in the Intel Quartus Prime Pro Edition Software

Related Information
Level Two Title