Visible to Intel only — GUID: GUID-FCF584FB-62A7-4783-A462-528E0BD29B06
Visible to Intel only — GUID: GUID-FCF584FB-62A7-4783-A462-528E0BD29B06
Warning: Analysis of Debug Build
Symptoms
A message appears when you start the Survey or Suitability tools and the current build options selected for the project is a Debug build.
Details
When measuring performance, using a version of the program for analysis that is close to the version that will be provided to customers provides the most accurate data. If you will provide a Release build for customers, run the Survey or Suitability tools with a Release build. You can run this tool with a Debug build if you will run it again with a Release build. To produce the best results, your build settings should specify debug information and moderate optimization.
When a tool is waiting for your input (click either Continue or Cancel), the result name has a [!] prefix. If you do not respond within several minutes, the tool implicitly chooses the Cancel button.
Cause
For the Survey or Suitability tools, you should use a Release build of your program, not a Debug build.
Possible Solution
Before you respond to the message, change to Release build settings and build the target executable. When it completes, click Continue to run the analysis.
Click Continue and ignore this message. Later, run this tool again with a target built using a Release build.
Click Cancel. Change your build settings to use a Release build and build the target executable. Then run the Intel® Advisor tool.
For the most current information on optimal C/C++ and Fortran build settings, see Build Your Target Application.