Visible to Intel only — GUID: sdi1685944694432
Ixiasoft
1. Agilex™ 5 LVDS SERDES Overview
2. Agilex™ 5 LVDS SERDES Architecture
3. Agilex™ 5 LVDS SERDES Transmitter
4. Agilex™ 5 LVDS SERDES Receiver
5. Agilex™ 5 High-Speed LVDS I/O Implementation Guide
6. Agilex™ 5 LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 5 LVDS SERDES Design Guidelines
9. Agilex™ 5 LVDS SERDES Troubleshooting Guidelines
10. LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs Archives
11. Document Revision History for the LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs
5.1.6.1. LVDS SERDES Intel® FPGA IP General Settings
5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings
5.1.6.3. LVDS SERDES Intel® FPGA IP PLL Settings
5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings
5.1.6.5. LVDS SERDES Intel® FPGA IP Transmitter Settings
5.1.6.6. LVDS SERDES Intel® FPGA IP Clock Resource Summary
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES
8.2. Use High-Speed Clock from PLL to Clock SERDES Only
8.3. Pin Placement for Differential Channels
8.4. SERDES Pin Pairs for Soft-CDR Mode
8.5. Placing LVDS SERDES Transmitters and Receivers with External PLL
8.6. Sharing LVDS SERDES I/O Lane with Other Intel® FPGA IPs
Visible to Intel only — GUID: sdi1685944694432
Ixiasoft
5.1.6.2.1. HSIO Pin Index Number and Respective Channel Pin Selection
The channel byte is a reference number to assign to an I/O lane. The placement of the pin pair on the I/O bank depends on which I/O lane you place the specific channel byte. If you turn on Customize Pin Selections, select the channel pin in the Pin Settings tab based on the pin index number within the HSIO bank. If you turn off Customize Pin Selections, use the table to identify which pin index pair the LVDS SERDES IP uses.
Pin Index Pair within HSIO Bank | Channel Pin | |||||||
---|---|---|---|---|---|---|---|---|
Bottom Index Sub-Bank | Top Index Sub-Bank | |||||||
Lane 0 | Lane 1 | Lane 2 | Lane 3 | Lane 4 | Lane 5 | Lane 6 | Lane 7 | |
0/1 | 12/13 | 24/25 | 36/37 | 48/49 | 60/61 | 72/73 | 84/85 | 0001 |
2/3 | 14/15 | 26/27 | 38/39 | 50/51 | 62/63 | 74/75 | 86/87 | 0203 |
4/5 | 16/17 | 28/29 | 40/41 | 52/53 | 64/65 | 76/77 | 88/89 | 0405 |
6/7 | 18/19 | 30/31 | 42/43 | 54/55 | 66/67 | 78/79 | 90/91 | 0607 |
8/9 | 20/21 | 32/33 | 44/45 | 56/57 | 68/69 | 80/81 | 92/93 | 0809 |
10/11 | 22/23 | 34/35 | 46/47 | 58/59 | 70/71 | 82/83 | 94/95 | 1011 |
For example, the RX channel 0 byte selection is 01 and the RX channel 0 pin selection is 0203. If you place byte 01 in lane 3 of the HSIO bank, the channel 0 location is pins with index numbers 38 and 39 within the bottom index sub-bank.
Figure 25. Pin Settings Tab Example