Intel® Simics® Simulator for Intel® FPGAs: Intel Agilex® 5 E-Series Virtual Platform User Guide

Download PDF
ID 786901
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About This Document 2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platforms 3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models 4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model 5. Supported Use Cases A. Document Revision History
1. About This Document x
1.1. Terminology 1.2. List of Acronyms
2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platforms x
2.1. Intel Agilex® 5 E-Series Universal Virtual Platform
2.1. Intel Agilex® 5 E-Series Universal Virtual Platform x
2.1.1. Intel Agilex® 5 E-Series Universal Virtual Platform Overview 2.1.2. Intel Agilex® 5 E-Series Universal Virtual Platform User-Configurable Parameters 2.1.3. Intel Agilex® 5 E-Series Virtual Platform Key Capabilities
2.1.1. Intel Agilex® 5 E-Series Universal Virtual Platform Overview x
2.1.1.1. Intel Agilex® 5 HPS Component 2.1.1.2. HPS Subsystem Component 2.1.1.3. FPGA Fabric Design 2.1.1.4. qsys_top Component 2.1.1.5. FPGA Component 2.1.1.6. Board Component 2.1.1.7. System Component 2.1.1.8. Target Script
2.1.3. Intel Agilex® 5 E-Series Virtual Platform Key Capabilities x
2.1.3.1. Boot-To-Operating System Prompt 2.1.3.2. Basic Ethernet 2.1.3.3. CPU Power-On and Boot Core Selection 2.1.3.4. Reset Flow 2.1.3.5. General Purpose I/O (GPIO) Loopback 2.1.3.6. USB Disks Hot-Plug Support 2.1.3.7. On-Chip Memory IP FPGA Fabric Example Design 2.1.3.8. FPGA-to-HPS Bridges
3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models x
3.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model 3.2. Virtual Platform HPS Subsystem Components 3.3. Virtual Platform qsys_top Components 3.4. Virtual Platform Board Components
3.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model x
3.1.1. Intel Agilex® 5 E-Series HPS Intel® Simics® Model Architecture 3.1.2. PSS Subsystem Components 3.1.3. MPU and APS Subsystem 3.1.4. MPFE Subsystem 3.1.5. Additional Intel Agilex® 5 E-Series HPS Components
3.2. Virtual Platform HPS Subsystem Components x
3.2.1. External Memory Interface (EMIF) 3.2.2. Security Device Manager (SDM)
3.3. Virtual Platform qsys_top Components x
3.3.1. FPGA Fabric
3.4. Virtual Platform Board Components x
3.4.1. Marvel EMAC PHY 3.4.2. SD Card device 3.4.3. ONFI NAND Memory Device Limitations 3.4.4. SPI Flash Device 3.4.5. AT24Cxx EEPROM Device 3.4.6. I3C Device 3.4.7. USB Disk Device 3.4.8. Intel® Simics® Text Console
4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model x
4.1. Prerequisites 4.2. Intel® Simics® Simulation Setup for the Intel Agilex® 5 E-Series Device 4.3. Starting the Simulation 4.4. Getting Device Information from the Intel® Simics® Model
1. About This Document
2. Intel Agilex® 5 E-Series Intel® Simics® Virtual Platforms
3. Intel Agilex® 5 E-Series Virtual Platform Component Intel® Simics® Models
4. Running a Simulation with the Intel Agilex® 5 E-Series HPS Model
5. Supported Use Cases
A. Document Revision History

3.4.3. ONFI NAND Memory Device

The NAND Flash device connects to the Combo PHY through a NAND flash interface.

The NAND device supported corresponds to a generic ONFI NAND Flash device model compatible with ONFI 1.0 specification. The following table lists the limitations of the NAND Flash device together with the NAND Controller.

The parameters of the NAND device supported are as follows:

  • Data bytes per page: 512, 2048, 4096, 8192, or 16384.
  • Number of pages per block: 16 or 32 for devices with 512-byte pages, 64 for devices with 2048 or 4096-byte pages, 128 for devices with 8192-byte pages, and 1024 for devices with 16384-byte pages.
  • Bus width: Configurable 8 or 16 bits.
  • Spare area page size: Valid from 1 to 2208.
  • Blocks per LUN is configurable.

Ensure that the configuration values for page size and the spare area size are consistent with the values supported on the ONFI specification.

Limitations

The following table lists supported and unsupported features and commands:

Supported

Commands: Read ID, Read Parameter Page, Reset, Read Page, Block Erase, Program Page, Read Status, Read Status Enhanced, Change Read Column Address, Change Write Column Address.

Unsupported

ECC/EDC calculation.

One-time programmable (OTP) area entry.

Commands: Multiplane commands, Cache Operations commands, Copy Back Read, Copy Back Program, READ ID2.

Component: nand_flash

Level Two Title