Agilex™ 7 LVDS SERDES User Guide: M-Series

ID 768615
Date 7/23/2024
Public
Document Table of Contents

5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode

The PLL is operational after it achieves lock in user mode. Before transferring data using SERDES block with the LVDS SERDES IP, ensure that the PLL is locked to the reference clock.

Altera recommends that you follow these steps to initialize the LVDS SERDES IP in non-DPA mode:

  1. During entry into user mode, assert the pll_areset signal for at least 10 ns.
    You can also perform this step at any time in user mode operation to reset the interface.
  2. After at least 10 ns, deassert the pll_areset signal and monitor the pll_locked port.
After the initialization, you can proceed to align the word boundaries (bit slip).