Visible to Intel only — GUID: gbn1658808364323
Ixiasoft
1. Agilex™ 7 M-Series LVDS SERDES Overview
2. Agilex™ 7 M-Series LVDS SERDES Architecture
3. Agilex™ 7 M-Series LVDS SERDES Transmitter
4. Agilex™ 7 M-Series LVDS SERDES Receiver
5. Agilex™ 7 M-Series High-Speed LVDS I/O Implementation Guide
6. Agilex™ 7 M-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 7 M-Series LVDS SERDES Design Guidelines
9. Agilex™ 7 M-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: M-Series
11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: M-Series
5.1.6.1. LVDS SERDES Intel® FPGA IP General Settings
5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings
5.1.6.3. LVDS SERDES Intel® FPGA IP PLL Settings
5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings
5.1.6.5. LVDS SERDES Intel® FPGA IP Transmitter Settings
5.1.6.6. LVDS SERDES Intel® FPGA IP Clock Resource Summary
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES
8.2. Use High-Speed Clock from PLL to Clock SERDES Only
8.3. Pin Placement for Differential Channels
8.4. SERDES Pin Pairs for Soft-CDR Mode
8.5. Placing LVDS SERDES Transmitters and Receivers in the Same GPIO-B Sub-Bank with External PLL
8.6. Sharing LVDS SERDES I/O Lane with Other Intel® FPGA IPs
8.7. VCCIO_PIO Power Scheme for LVDS SERDES
Visible to Intel only — GUID: gbn1658808364323
Ixiasoft
2. Agilex™ 7 M-Series LVDS SERDES Architecture
Each GPIO-B bank in M-Series devices consists of two sub-banks. Each sub-bank contains its own VCCIO_PIO and PLL. Each LVDS SERDES pair has its own dynamic phase alignment (DPA) and SERDES circuitry blocks.
You can configure each SERDES channel as a transmitter or a receiver.
Total Transmitter or Receiver Pairs Per Bank | Channel Mode | Maximum Pairs Per Sub-Bank | |
---|---|---|---|
Top Index Sub-Bank |
Bottom Index Sub-Bank |
||
472 |
Transmitter | 24 | 24 |
DPA | 24 | 24 | |
Non-DPA | 24 | 24 | |
Soft-CDR | 4 | 8 |
Section Content
Agilex 7 M-Series GPIO-B Banks, SERDES, and DPA Locations
SERDES Blocks, Modes, and Clock Domains
2 One LVDS SERDES pair is used for the reference clock.