Visible to Intel only — GUID: qji1551276014871
Ixiasoft
1. Agilex™ 7 M-Series LVDS SERDES Overview
2. Agilex™ 7 M-Series LVDS SERDES Architecture
3. Agilex™ 7 M-Series LVDS SERDES Transmitter
4. Agilex™ 7 M-Series LVDS SERDES Receiver
5. Agilex™ 7 M-Series High-Speed LVDS I/O Implementation Guide
6. Agilex™ 7 M-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 7 M-Series LVDS SERDES Design Guidelines
9. Agilex™ 7 M-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Agilex™ 7 LVDS SERDES User Guide: M-Series
11. Document Revision History for the Agilex™ 7 LVDS SERDES User Guide: M-Series
5.1.6.1. LVDS SERDES Intel® FPGA IP General Settings
5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings
5.1.6.3. LVDS SERDES Intel® FPGA IP PLL Settings
5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings
5.1.6.5. LVDS SERDES Intel® FPGA IP Transmitter Settings
5.1.6.6. LVDS SERDES Intel® FPGA IP Clock Resource Summary
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES
8.2. Use High-Speed Clock from PLL to Clock SERDES Only
8.3. Pin Placement for Differential Channels
8.4. SERDES Pin Pairs for Soft-CDR Mode
8.5. Placing LVDS SERDES Transmitters and Receivers in the Same GPIO-B Sub-Bank with External PLL
8.6. Sharing LVDS SERDES I/O Lane with Other Intel® FPGA IPs
8.7. VCCIO_PIO Power Scheme for LVDS SERDES
Visible to Intel only — GUID: qji1551276014871
Ixiasoft
4. Agilex™ 7 M-Series LVDS SERDES Receiver
The M-Series LVDS SERDES receivers are dedicated circuitries.
Dedicated Circuitry / Feature | Description |
---|---|
Differential I/O buffer | Supports I/O standards compatible with LVDS, RSDS, SLVS, Mini-LVDS, and LVPECL:
|
Deserializer | Up to 4-bit or 8-bit wide deserializer |
Phase-locked loops (PLLs) | Generates different phases of a clock for data synchronizer |
Data realignment (bit slip) | Inserts bit latencies into serial data |
Dynamic phase alignment (DPA) | Chooses a phase closest to the phase of the serial data |
Synchronizer (FIFO buffer) | Compensate for phase differences between the data and the receiver’s input reference clock |
On-chip termination (OCT) RD | 100 Ω in True Differential Signaling I/O standards |