F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP User Guide

ID 720985
Date 4/18/2024
Public
Document Table of Contents

2.5.2. TX and RX Latency

The TX and RX latency values are based on the following definitions and assumptions:

  • TX latency is the time taken for the data frame to move from the Avalon® streaming interface to the PHY-side interface.
  • RX latency is the time taken for the data frame to move from the PHY-side interface to the Avalon® streaming interface.
  • No backpressure on the Avalon® streaming TX and RX interfaces.
  • All options under Legacy Ethernet 10G MAC interfaces, that allow compatibility with the legacy MAC are disabled.
Table 7.  TX and RX Latency Values for Agilex™ 7 F-Tile Devices (AGIB027R31B1E2VR0)These latency values are MAC-only latencies and do not include the PHY latencies.
MAC Operating Mode Speed Latency (ns)
TX RX Total
10M/100M/1G/2.5G/5G/10G (USXGMII) 10 Gbps 73.587 54.394 127.981
5 Gbps 89.593 73.591 163.184
2.5 Gbps 92.791 115.175 207.966
1 Gbps 217.643 227.243 444.886
100 Mbps 1645.442 1958.423 3603.865
10 Mbps 15414.306 19238.41 34652.16