Visible to Intel only — GUID: bhc1395127678565
Ixiasoft
1. About the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP User Guide
2. Low Latency Ethernet 10G MAC Intel® FPGA IP Overview
3. Getting Started
4. Functional Description
5. Low Latency Ethernet 10G MAC Intel® FPGA IP Parameters
6. Interface Signals
7. Configuration Registers
8. F-Tile Low Latency Ethernet 10G MAC Intel FPGA IP User Guide Archives
9. Document Revision History for the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP User Guide
3.1. Introduction to Intel® FPGA IP Cores
3.2. Installing and Licensing Intel® FPGA IP Cores
3.3. Specifying the IP Core Parameters and Options ( Quartus® Prime Pro Edition)
3.4. Generated File Structure
3.5. Simulating Intel® FPGA IP Cores
3.6. Upgrading the Low Latency Ethernet 10G MAC Intel® FPGA IP Core
3.7. Low Latency Ethernet 10G MAC Intel® FPGA IP Design Examples
6.1. Clock and Reset Signals
6.2. Speed Selection Signal
6.3. Error Correction Signals
6.4. Avalon® Memory-Mapped Interface Programming Signals
6.5. Avalon® Streaming Data Interfaces
6.6. Avalon® Streaming Flow Control Signals
6.7. Avalon® Streaming Status Interface
6.8. PHY-side Interfaces
6.9. IEEE 1588v2 Interfaces
Visible to Intel only — GUID: bhc1395127678565
Ixiasoft
4.5. RX Datapath
The MAC RX receives Ethernet frames from the XGMII and forwards the payload with relevant frame fields to the client after performing checks and filtering invalid frames. Some frame fields are optionally removed from the frame before MAC RX forwards the frame to the client.
The following figure shows the typical flow of frame through the MAC RX.
Figure 18. Typical Client Frame at Receive Interface