F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP User Guide

ID 720985
Date 4/18/2024
Public
Document Table of Contents

4.6.1. IEEE 802.3 Flow Control

To use the IEEE 802.3 flow control, set the following registers:

  • On the TX datapath:
    • Set tx_pauseframe_enable[0] to 1 to enable the IEEE 802.3 flow control.
  • On the RX datapath:
    • Set the IGNORE_PAUSE bit in the rx_frame_control register to 0 to enable the IEEE 802.3 flow control.