Visible to Intel only — GUID: zzq1644946788272
Ixiasoft
1. Introduction
2. Interface Overview
3. Parameters
4. Designing with the IP Core
5. Block Description
6. Cryptographic IP Data Profiles
7. Configuration Registers
8. Design Example
9. Symmetric Cryptographic Intel FPGA Hard IP User Guide Archives
10. Document Revision History for the Symmetric Cryptographic Intel FPGA Hard IP User Guide
4.1. Installing and Licensing Intel® FPGA IP Cores
4.2. Specifying the IP Core Parameters and Options
4.3. Generated File Structure
4.4. Symmetric Cryptographic IP Core Flow
4.5. Dynamically Disabling SM4 Capability
4.6. Error Handling
4.7. Error Reporting
4.8. Resetting the IP Core
4.9. Channel Definition and Allocation
4.10. Byte Ordering
4.11. AXI-ST Single Packet Mode
4.12. AXI-ST Multiple Packet Mode
Visible to Intel only — GUID: zzq1644946788272
Ixiasoft
4.8. Resetting the IP Core
Follow these steps to bring the Symmetric Cryptographic IP core from user mode to the streaming mode. The streaming mode enables you to stream in packets to the Symmetric Cryptographic IP core:
- Assert the subsystem_cold_reset_n signal to reset the Symmetric Cryptographic IP core and enter the user mode.
- Verify that you have a stable clock to the i_crypto_clk, app_ip_st_clk, and app_ip_lite_clk clock signals. Assert the pll_lock signal.
- Wait for the subsystem_cold_rst_ack_n acknowledgement signal to assert.
- Deassert the subsystem_cold_reset_n signal to release the reset on the AES/SM4 Inline Cryptographic Accelerator subsystem and begin streaming in data.