DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 5/27/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.6.2.3.2. Setting up Board Support Packages for Other Device Families

Procedure

  1. In the scripts/post_flow.tcl file remove the following line:
    source $::env(ALTERAOCLSDKROOT)/ip/board/bsp/adjust_plls.tcl
  2. Open board.qsys file in Platform Designer
    1. Remove the kernel_clk_generator instance.
    2. Add instance of Intel PLL with one output clock. Set the reference clock frequency.
    3. Export the refclk clock input interface with kernel_pll_refclk name
    4. Connect outclk0 to the initial source of kernel_clk_generator.kernel_clk output.
    5. Connect the global_rest_in.out_reset output to reset input of PLL instance.
    6. Set the generated clock frequency
      Note: The design must meet timing on this clock domain. Intel advises that you use a low target frequency.