JESD204B Intel® FPGA IP Design Example User Guide: Quartus® Prime Standard Edition

Download PDF
ID 683094
Date 7/19/2024
Public
Document Table of Contents
Document Table of Contents x
1. JESD204B Intel® FPGA IP Design Example User Guide
1. JESD204B Intel® FPGA IP Design Example User Guide x
1.1. JESD204B Design Example Quick Start Guide 1.2. Supported Configurations 1.3. Generic Design Example 1.4. Presets 1.5. Selecting and Generating the Design Example 1.6. Design Example with RTL State Machine Control Unit 1.7. JESD204B Intel® FPGA IP Design Example User Guide Document Archives 1.8. Document Revision History for the JESD204B Intel® FPGA IP Design Example User Guide
1.1. JESD204B Design Example Quick Start Guide x
1.1.1. Directory Structure 1.1.2. Generating the Design 1.1.3. Compiling and Simulating the Design 1.1.4. Compiling and Testing the Design
1.1.2. Generating the Design x
1.1.2.1. Procedure 1.1.2.2. Design Example Parameters
1.1.3. Compiling and Simulating the Design x
1.1.3.1. Procedure
1.6. Design Example with RTL State Machine Control Unit x
1.6.1. Design Example Components 1.6.2. System Parameters 1.6.3. System Interface Signals 1.6.4. Example Feature: Dynamic Reconfiguration 1.6.5. Generating and Simulating the Design Example 1.6.6. Generating the Design Example For Compilation 1.6.7. Compiling the JESD204B IP Core Design Example
1.6.1. Design Example Components x
1.6.1.1. PLL 1.6.1.2. PLL Reconfiguration 1.6.1.3. Transceiver Reconfiguration Controller 1.6.1.4. Transceiver Reset Controller 1.6.1.5. Pattern Generator 1.6.1.6. Pattern Checker 1.6.1.7. Transport Layer 1.6.1.8. Serial Port Interface (SPI) 1.6.1.9. Control Unit
1.6.1.5. Pattern Generator x
1.6.1.5.1. Parallel PRBS Generator 1.6.1.5.2. Alternate Checkerboard Generator 1.6.1.5.3. Ramp Wave Generator
1.6.1.6. Pattern Checker x
1.6.1.6.1. Parallel PRBS Checker 1.6.1.6.2. Alternate Checkerboard Checker 1.6.1.6.3. Ramp Wave Checker
1.6.1.7. Transport Layer x
1.6.1.7.1. Supported System Configuration 1.6.1.7.2. Data Bit and Content Mapping Scheme 1.6.1.7.3. TX Path 1.6.1.7.4. RX Path
1.6.1.9. Control Unit x
1.6.1.9.1. Memory Block (ROM) 1.6.1.9.2. Finite State Machine (FSM)
1.6.2. System Parameters x
1.6.2.1. Run-Time Reconfiguration
1.6.4. Example Feature: Dynamic Reconfiguration x
1.6.4.1. Dynamic Reconfiguration Operation 1.6.4.2. MIF ROM
1.6.5. Generating and Simulating the Design Example x
1.6.5.1. Generating the Design Example Simulation Model 1.6.5.2. Simulating the JESD204B IP Core Design Example
1. JESD204B Intel® FPGA IP Design Example User Guide

1.6.1.1. PLL

The design example requires four different clock domains—device clock, management clock, frame clock, and link clock.

Typically, the device clock is generated from an external converter or a clock device while the management clock (AVS clock) is generated from an on-board 100 MHz oscillator.

For instance, if the JESD204B IP core is configured at data rate of 6.144 Gbps, transceiver reference clock frequency of 153.6 MHz, and number of octets per frame (F) = 2, the example below indicates the PLL clock frequencies:

  • device clock = transceiver reference clock frequency = 153.6 MHz
  • link clock = 6144 / 40 = 153.6 MHz
  • frame clock = 153.6 x 32 / (8 x 2) = 307.2 MHz
Related Information
Level Two Title