LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 813929
Date 4/08/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 5 LVDS SERDES Overview 2. Agilex™ 5 LVDS SERDES Architecture 3. Agilex™ 5 LVDS SERDES Transmitter 4. Agilex™ 5 LVDS SERDES Receiver 5. Agilex™ 5 High-Speed LVDS I/O Implementation Guide 6. Agilex™ 5 LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Agilex™ 5 LVDS SERDES Design Guidelines 9. Agilex™ 5 LVDS SERDES Troubleshooting Guidelines 10. Document Revision History for the LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs
1. Agilex™ 5 LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Agilex™ 5 LVDS SERDES Architecture x
2.1. Agilex™ 5 HSIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Agilex™ 5 LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations 3.2.2. Differential I/O Bit Position
4. Agilex™ 5 LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings for Non-DPA Mode
4.2.1. Receiver Input Clock Parameters Settings for Non-DPA Mode x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Agilex™ 5 High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Planning the LVDS SERDES Interface 5.1.5. Generating the LVDS SERDES Intel® FPGA IP 5.1.6. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.7. LVDS SERDES Intel® FPGA IP Signals
5.1.5. Generating the LVDS SERDES Intel® FPGA IP x
5.1.5.1. Intel® FPGA IP Generation Output
5.1.6. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.6.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings 5.1.6.3. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.6.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings x
5.1.6.2.1. HSIO Pin Index Number and Respective Channel Pin Selection 5.1.6.2.2. Placing Channel Bytes in I/O Lanes 5.1.6.2.3. Locating the I/O Lane and Channel Pin through the Interface Planner
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Agilex™ 5 LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Agilex™ 5 LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS SERDES Transmitters and Receivers with External PLL 8.6. Sharing LVDS SERDES I/O Lane with Other Intel® FPGA IPs
8.3. Pin Placement for Differential Channels x
8.3.1. I/O PLLs Driving LVDS SERDES Transmitter and Receiver Channels 8.3.2. Placement Restrictions for True Differential and Single-Ended I/O Standards in the Same or Adjacent HSIO Bank
1. Agilex™ 5 LVDS SERDES Overview
2. Agilex™ 5 LVDS SERDES Architecture
3. Agilex™ 5 LVDS SERDES Transmitter
4. Agilex™ 5 LVDS SERDES Receiver
5. Agilex™ 5 High-Speed LVDS I/O Implementation Guide
6. Agilex™ 5 LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 5 LVDS SERDES Design Guidelines
9. Agilex™ 5 LVDS SERDES Troubleshooting Guidelines
10. Document Revision History for the LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs

5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings

The parameter options in the Receiver Settings tab are available if you select the RX Non-DPA, RX DPA-FIFO, or RX Soft-CDR functional mode in the General Settings tab.
Table 18.  Receiver Settings Tab—Bitslip Settings
Parameter Value Description
Enable bitslip mode
  • On
  • Off

Turn on to add a bit slip block to the receiver data path and expose the rx_bitslip_ctrl port (one input per channel).

Default is Off.

Every assertion of the rx_bitslip_ctrl signal adds one bit of serial latency to the data path of the specified channel.

Note: You must enable this parameter for the IP simulation driver to function correctly.
Enable rx_bitslip_reset port
  • On
  • Off

Turn on to expose the rx_bitslip_reset port (one input per channel) that you can use to reset the bit slip.

Default is Off.

This setting is available if you turn on Enable bitslip mode.

Enable rx_bitslip_max port
  • On
  • Off

Turn on to expose the rx_bitslip_max port (one output per channel).

Default is Off.

When asserted, the next rising edge of rx_bitslip_ctrl resets the latency of the bit slip to zero.

This setting is available if you turn on Enable bitslip mode.

Table 19.  Receiver Settings Tab—DPA Settings
Parameter Value Description
Enable rx_dpa_reset port
  • On
  • Off

Turn on to expose the rx_dpa_reset port that you can use to reset the DPA logic of each channel independently.

(Formerly known as rx_reset.)

Default is Off.

This setting is available if you select RX DPA-FIFO or RX Soft-CDR in RX functional mode.

Enable rx_fifo_reset port
  • On
  • Off

Turn on to use your logic to drive the rx_fifo_reset port to reset the DPA-FIFO block.

Default is Off.

This setting is available if you select RX DPA-FIFO in RX functional mode.

Enable rx_dpa_hold port
  • On
  • Off

Turn on to expose the rx_dpa_hold input port (one input per channel).

If set high, the DPA logic in the corresponding channel does not switch sampling phases.

(Formerly known as rx_dpll_hold.)

Default is Off.

This setting is available if you select RX DPA-FIFO in RX functional mode.

Table 20.  Receiver Settings Tab—Non-DPA Settings
Parameter Value Description
Desired receiver inclock phase shift (degrees) —

Specifies, in degrees of the LVDS fast clock, the ideal phase delay of inclock with respect to transitions in the incoming serial data.

For example, specifying 180° implies that the inclock is center aligned to the incoming data.

Actual receiver inclock phase shift (degrees)

Depends on the fast_clock and inclock frequencies. Refer to the related information.

Specifies the closest achievable receiver inclock phase shift to the desired receiver inclock phase shift.

RCCS (ps) —

Specifies the RCCS value in picoseconds.

Depending on the order the Quartus® Prime software reads the project .sdc files, this value may override any RCCS value you specify in the .sdc file.

To avoid uncertainty, Intel recommends that you specify the RCCS value in only one of the locations.

Related Information
Level Two Title