Visible to Intel only — GUID: sam1446086887907
Ixiasoft
1. Agilex™ 5 LVDS SERDES Overview
2. Agilex™ 5 LVDS SERDES Architecture
3. Agilex™ 5 LVDS SERDES Transmitter
4. Agilex™ 5 LVDS SERDES Receiver
5. Agilex™ 5 High-Speed LVDS I/O Implementation Guide
6. Agilex™ 5 LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Agilex™ 5 LVDS SERDES Design Guidelines
9. Agilex™ 5 LVDS SERDES Troubleshooting Guidelines
10. LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs Archives
11. Document Revision History for the LVDS SERDES User Guide: Agilex™ 5 FPGAs and SoCs
5.1.6.1. LVDS SERDES Intel® FPGA IP General Settings
5.1.6.2. LVDS SERDES Intel® FPGA IP Pin Settings
5.1.6.3. LVDS SERDES Intel® FPGA IP PLL Settings
5.1.6.4. LVDS SERDES Intel® FPGA IP Receiver Settings
5.1.6.5. LVDS SERDES Intel® FPGA IP Transmitter Settings
5.1.6.6. LVDS SERDES Intel® FPGA IP Clock Resource Summary
8.1. Use PLLs in Integer PLL Mode for LVDS SERDES
8.2. Use High-Speed Clock from PLL to Clock SERDES Only
8.3. Pin Placement for Differential Channels
8.4. SERDES Pin Pairs for Soft-CDR Mode
8.5. Placing LVDS SERDES Transmitters and Receivers with External PLL
8.6. Sharing LVDS SERDES I/O Lane with Other Intel® FPGA IPs
Visible to Intel only — GUID: sam1446086887907
Ixiasoft
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode
The PLL is operational after it achieves lock in user mode. Before transferring data using SERDES block with the LVDS SERDES IP, ensure that the PLL is locked to the reference clock.
Altera recommends that you follow these steps to initialize the LVDS SERDES IP in non-DPA mode:
- During entry into user mode, assert the pll_areset signal for at least 10 ns.
You can also perform this step at any time in user mode operation to reset the interface.
- After at least 10 ns, deassert the pll_areset signal and monitor the pll_locked port.
After the initialization, you can proceed to align the word boundaries (bit slip).