Visible to Intel only — GUID: nal1501274512138
Ixiasoft
1. About the Stratix® 10 10GBASE-KR PHY IP Core
2. Getting Started
3. Parameter Settings
4. Functional Description
5. Stratix® 10 10GBASE-KR PHY Registers
6. Interface Signals
7. Design Example
8. Supported Tools
A. Difference between Stratix® 10 and Arria® 10 IP Variants
B. Stratix® 10 10GBASE-KR PHY IP Core User Guide Archives
C. Document Revision History for Stratix® 10 10GBASE-KR PHY IP Core User Guide
7.1.1. Design Example Directory Structure
7.1.2. Hardware Design Example Components
7.1.3. Simulation Design Example Components
7.1.4. Generating the Design Example
7.1.5. Simulating the Stratix® 10 10GBASE-KR Design Example Testbench
7.1.6. Compiling and Configuring the Design Example in Hardware
7.1.7. Testing the Hardware Design Example
Visible to Intel only — GUID: nal1501274512138
Ixiasoft
2.2. Specifying the IP Core Parameters and Options
The Stratix® 10 10GBASE-KR PHY parameter editor allows you to quickly configure your custom IP variation. Perform the following steps to specify IP core options and parameters in the Quartus® Prime Pro Edition software:
- In the Quartus® Prime Pro Edition, click File > New Project Wizard to create a new Quartus® Prime project, or File > Open Project to open an existing Quartus® Prime project. The wizard prompts you to specify a device.
- In the IP Catalog (Tools > IP Catalog), locate and double-click Stratix 10 10GBASE-KR PHY. The New IP Variant window appears.
- Specify a top-level name for your custom IP variation. The parameter editor saves the IP variation settings in a file named <your_ip> .ip.
- Click Create. The parameter editor appears.
- On the IP tab, specify the parameters for your IP core variation. Refer to Parameter Settings for information about specific IP core parameters.
- Optionally, to generate a simulation testbench or compilation and hardware design example, follow the instructions in the Design Example section.
- Click Generate HDL. The Generation dialog box appears.
- Specify output file generation options, and then click Generate. The IP variation files generate according to your specifications.
- Click Finish. The parameter editor adds the top-level .ip file to the current project automatically. If you are prompted to manually add the .ip file to the project, click Project > Add/Remove Files in Project to add the file.
- After generating and instantiating your IP variation, make appropriate pin assignments to connect ports.