Visible to Intel only — GUID: GUID-185E8C36-F994-4D8A-861C-8E531B1390A3
Visible to Intel only — GUID: GUID-185E8C36-F994-4D8A-861C-8E531B1390A3
IIRGenLowpass, IIRGenHighpass
Computes lowpass and highpass IIR filter coefficients.
Syntax
IppStatus ippsIIRGenLowpass_64f(Ipp64f rFreq, Ipp64f ripple, int order, Ipp64f* pTaps, IppsIIRFilterType filterType, Ipp8u* pBuffer);
IppStatus ippsIIRGenHighpass_64f(Ipp64f rFreq, Ipp64f ripple, int order, Ipp64f* pTaps, IppsIIRFilterType filterType, Ipp8u* pBuffer);
Include Files
ipps.h
Domain Dependencies
Headers: ippcore.h, ippvm.h
Libraries: ippcore.lib, ippvm.lib
Parameters
rFreq |
Cutoff frequency, should be in the range (0, 0.5). |
ripple |
Posible ripple in pass band for ippChebyshev1 type of filter. |
order |
Order of the filter [1, 12] |
pTaps |
Pointer to the array where computed tap values are stored. |
filterType |
Type of the IIR filter, possible values: ippButterworth, ippChebyshev1. |
pBuffer |
Pointer to the buffer for internal calculations. To get the size of the buffer, use the ippsIIRGenGetBufferSize function. |
Description
These functions computes coefficients for lowpass or highpass IIR filters, respectively, with the cutoff frequency rFreq. The parameter filterType specifies the type of the filter. The computed coefficients are stored in the array pTaps. Its length must be at least 2*(order + 1) and the taps arranged in the array as follows:
B0, B1, . . ., Border, A0, A1, . . ., Aorder
Application Notes
Butterworth filters are characterized by a magnitude response that is at most flat in the passband and monotonic overall. Butterworth filters sacrifice rolloff steepness for monotonicity in the passband. Unless the smoothness of the Butterworth filter is needed, Chebyshev1 filter can generally provide steeper rolloff characteristics with a lower filter order. Chebyshev1 type filters are equiripple in the passband and monotonic in the stopband. For ippButterworth filter cutoff frequency is the frequency where the magnitude response of the filter is 2-1/2. For ippChebyshev1 filter cutoff frequency is the frequency at which the magnitude response of the filter is (-ripple) dB. For the functions ippsIIRGenLowpass and ippsIIRGenHighpass, the normalized cutoff frequency rFreq must be a number between 0 and 0.5, where 0.5 corresponds to the Nyquist frequency, π radians per sample. The correspondence between MATLAB's Wn and Intel IPP rFreq is very simple: Wn = 2*rFreq.
Examples:
1) For data sampled at 1000 Hz, create a 9th-order highpass Butterworth filter with cutoff frequency at 300 Hz.
Intel IPP:
Ipp64f pTaps[2*(9+1)];
status = ippsIIRGenHighpass( 300.0/1000.0, 0, 9, pTaps, ippButterworth );
MATLAB:
[b,a] = butter(9,300/500,'high');
2) For data sampled at 1000 Hz, create a 9th-order lowpass Chebyshev1 filter with ripple in the passband of 0.5 dB and a cutoff frequency at 300 Hz.
Intel IPP:
Ipp64f pTaps[2*(9+1)];
status = ippsIIRGenLowpass( 300.0/1000.0, 0.5, 9, pTaps, ippChebyshev1 );
MATLAB:
[b,a] = cheby1(9, 0.5, 300/500);
Return Values
ippStsNoErr |
Indicates no error. |
ippStsNullPtrErr |
Indicates an error when the pTaps pointer is NULL. |
ippStsIIRGenOrderErr |
Indicates an error when the order is less than 1 or greater than 12. |
ippStsFilterFrequencyErr |
Indicates an error when the rFreq is out of the range. |