F-Tile Low Latency 100G Ethernet Intel® FPGA IP Design Example User Guide

ID 815243
Date 4/01/2024
Public

1.2.1. Design Example Parameters

Table 2.  Parameters in the Example Design Tab
Parameter Description
Select Design Available example designs for the IP parameter settings.

Single Instance of IP Core: Example design instantiates a single instance of the IP.

Example Design Files

The files to generate for the different development phase.

  • Simulation: Generates the necessary files for simulating the example design.
  • Synthesis: Generates the synthesis files. Use these files to compile the design in the Quartus® Prime Pro Edition software for hardware testing and perform static timing analysis.
Generate File Format The format of the RTL files for simulation—Verilog or VHDL.
Select Board

Provides supports for various development kits listed. The details of Intel FPGA development kits can be found on the Intel FPGA website.

If this menu is greyed out, it is because no board is supported for the options selected such as synthesis checked off.

If an Intel FPGA development board is selected, the Target Device used for generation will be the one that matches the device on the development kit.

Agilex 7 Transceiver Signal Integrity Development Kit (Production): This option allows you to test the design example on the selected Intel FPGA IP development kit. This option automatically selects the Target Device to match the device on the Intel FPGA IP development kit. If your board revision has a different device grade, you can change the target device.

None: This option excludes the hardware aspects for the design example.