Power Distribution Network Design Guidelines: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 813963
Date 7/08/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 5 Power Distribution Network Design Guidelines Overview 2. Power Delivery Overview 3. Board Power Delivery Network Recommendations 4. Board LC Recommended Filters for Noise Reduction in Combined Power Delivery Rails 5. PCB PDN Design Guideline for Unused GTS Transceiver 6. PCB Voltage Regulator Recommendation for PCB Power Rails 7. Board Power Delivery Network Simulations 8. Agilex™ 5 Device Family PDN Design Summary 9. Document Revision History for the Power Distribution Network Design Guidelines: Agilex™ 5 FPGAs and SoCs
1. Agilex™ 5 Power Distribution Network Design Guidelines Overview x
1.1. Device Guidelines Status for Agilex™ 5 Devices
2. Power Delivery Overview x
2.1. Power Architecture 2.2. Rail Merger Requirements 2.3. Power Rails Specification 2.4. Decoupling Capacitors Recommendation
2.1. Power Architecture x
2.1.1. Power Budget 2.1.2. Power Tree
2.1.2. Power Tree x
2.1.2.1. Recommended Power Tree for the Agilex™ 5 E-Series and D-Series Devices with SmartVID and GTS Transceiver in the Device Packages 2.1.2.2. Recommended Power Tree for the Agilex™ 5 E-Series and D-Series Devices with Non-SmartVID and GTS Transceiver in the Device Packages
2.3. Power Rails Specification x
2.3.1. Power Nets 2.3.2. Power Rails Tolerance 2.3.3. Power Nets and Transient Specifications
2.3.1. Power Nets x
2.3.1.1. Agilex™ 5 Package Power Nets and Subsystems Details
2.4. Decoupling Capacitors Recommendation x
2.4.1. Agilex™ 5 FPGA Packages Board-Level Decoupling Capacitors Summary 2.4.2. Agilex™ 5 GTS Transceiver Board-Level Decoupling Capacitors Summary
3. Board Power Delivery Network Recommendations x
3.1. Board Decoupling Capacitors Guide 3.2. FPGA Core Fabric VCC Voltage Regulator Selection 3.3. Remote Sense Connections 3.4. Load Line Requirements 3.5. VCC Core Board Current Slew Rate
4. Board LC Recommended Filters for Noise Reduction in Combined Power Delivery Rails x
4.1. GTS Transceiver Rail Board Connection and LC Filter Recommendation under Noisy Voltage Regulator
5. PCB PDN Design Guideline for Unused GTS Transceiver x
5.1. PDN Design Guideline for Unused GTS Transceiver
1. Agilex™ 5 Power Distribution Network Design Guidelines Overview
2. Power Delivery Overview
3. Board Power Delivery Network Recommendations
4. Board LC Recommended Filters for Noise Reduction in Combined Power Delivery Rails
5. PCB PDN Design Guideline for Unused GTS Transceiver
6. PCB Voltage Regulator Recommendation for PCB Power Rails
7. Board Power Delivery Network Simulations
8. Agilex™ 5 Device Family PDN Design Summary
9. Document Revision History for the Power Distribution Network Design Guidelines: Agilex™ 5 FPGAs and SoCs

1. Agilex™ 5 Power Distribution Network Design Guidelines Overview

This application note provides information for the Agilex™ 5 device family power distribution network (PDN) design guidelines. A solid design guidelines for the Agilex™ 5 device family PDN including fixed decoupling capacitors on board and minimum simulation is proposed.

In the previous FPGA families (for example, the Stratix® 10 and Arria® 10 devices), the PDN tool was used along with power consumption data from the Early Power Estimator (EPE) and the pin connection guidelines to design and optimize board-level PDN. However, due to achieving non-feasible PDN design tool (decoupling capacitors) specifically for core, and with pessimistic results, the PDN tool is not used or supported for the Agilex™ 5 device family.

The information in this application note is intended to provide guidelines to allow you to successfully complete your PDN design, without requiring additional support.

Refer to the Power Management User Guide: Agilex™ 5 FPGAs and SoCs for more information.


Section Content
Device Guidelines Status for Agilex 5 Devices

Related Information
Level Two Title