MIPI CSI-2 Intel® FPGA IP Design Example User Guide

Download PDF
ID 813931
Date 4/26/2024
Public
Document Table of Contents
Document Table of Contents x
1. MIPI CSI-2 Intel® FPGA IP Design Example Quick Start Guide 2. MIPI CSI-2 Intel® FPGA IP Design Example 3. Document Revision History for the MIPI CSI-2 Intel® FPGA IP Design Example User Guide
1. MIPI CSI-2 Intel® FPGA IP Design Example Quick Start Guide x
1.1. Generating the Design 1.2. Simulating the Design 1.3. Directory Structure 1.4. Compiling the Design
1.1. Generating the Design x
1.1.1. Design Example Parameters
2. MIPI CSI-2 Intel® FPGA IP Design Example x
2.1. Agilex™ 5 MIPI CSI-2 RX+TX Subsystem Design Features 2.2. Agilex™ 5 MIPI CSI-2 RX-only Design Features 2.3. Software Requirements 2.4. Functional Description 2.5. Simulation
2.4. Functional Description x
2.4.1. Design Components 2.4.2. Reset Scheme 2.4.3. Clocking Scheme
2.5. Simulation x
2.5.1. Data Signal Checking 2.5.2. Verification 2.5.3. Display Messages 2.5.4. Waveform Plotting 2.5.5. Structure 2.5.6. Known Limitations
2.5.5. Structure x
2.5.5.1. Top Level Testbench 2.5.5.2. Device Under Test (DUT) Wrapper 2.5.5.3. PHY-Protocol Interface (PPI) Loopback 2.5.5.4. Test Generator
1. MIPI CSI-2 Intel® FPGA IP Design Example Quick Start Guide
2. MIPI CSI-2 Intel® FPGA IP Design Example
3. Document Revision History for the MIPI CSI-2 Intel® FPGA IP Design Example User Guide

2.5.6. Known Limitations

The following are the known limitations:
  • Four-lane and eight-lane are not supported in this release.
  • Riviera and Xcelium are not supported in this release.
  • YUV modes are not supported for MIPI TX and therefore not supported by the simulation.
  • RGB888 is not supported with 1LANE 2PIXEL_IN_PARALLEL.
  • RGB444, RGB555, RGB565, and RGB666 modes are not supported for simulation.
  • RAW6 is not supported with 2LANE 1PIXEL_IN_PARALLEL. This is not a practical use case as the clock rate would be too fast.
Level Two Title