SEU Mitigation User Guide: Agilex™ 5 FPGAs and SoCs

ID 813649
Date 9/20/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.6.9. Injecting SDM ECC Errors

To inject SDM ECC errors, you can use the command-line interface or the GUI.
  • Command-line interface—use the quartus_fid command.
  • GUI—use the Quartus® Prime Tcl Console with the Fault Injection Debugger tool.
  • GUI—use the Fault Injection Debugger tool.
  • Command-line interface—use the mailbox command, INSERT_ECC_ERROR [0x42].

The injected error simulates the Advanced SEU Detection IP's report of the SDM ECC error response. You can use the simulated response to test your system's response to SDM ECC errors being reported by the Advanced SEU Detection IP.