Visible to Intel only — GUID: xjd1699011483072
Ixiasoft
4.6.1. Launching and Setting Up the Fault Injection Debugger
4.6.2. Configuring Your Device using a Software Object File (.sof)
4.6.3. Constraining Regions for Fault Injection
4.6.4. Injecting Errors to Predefined Safe Locations
4.6.5. Blowing Fuse Bit to Enable Injecting All Error Types
4.6.6. Injecting Errors to Random Locations
4.6.7. Injecting Errors to Specific Locations
4.6.8. Injecting Double Adjacent Errors
4.6.9. Injecting SDM ECC Errors
Visible to Intel only — GUID: xjd1699011483072
Ixiasoft
4.6.9.1. Injecting SDM ECC Errors: Command-Line Interface
In the command-line interface, run the quartus_fid command with the following syntax:
quartus_fid -–cable=<cable_num> --index=@<device_num>=<sof_file> --number=<n> --ecc="@<device_num>=<sector_index> <RAM_ID>"
To list values for <sector_index> and RAM_ID, run:
quartus_fid -c 1 -i "@1=<sof_file>" --ecc_list
Examples of the quartus_fid Command
-
quartus_fid --cable=1 --index=@1=test.sof --number=1 --ecc="@1=0x07 0x0"
-
quartus_fid -c 1 -i "@1=test.sof" -n 1 -e "@1=0x7 0x0"