Nios® V Embedded Processor Design Handbook

ID 726952
Date 10/31/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

9. Document Revision History for the Nios® V Embedded Processor Design Handbook

Document Version Intel® Quartus® Prime Version IP Version Changes
2022.10.31 22.1std 1.0.0
  • Updated references from Intel® Quartus® Prime Pro Edition to Intel® Quartus® Prime to indicate support for both Pro and Standard Edition.
  • Added new topic: Intel Quartus® Prime Software Support.
2022.10.25 22.3 22.3.0
  • Added new section: Nios V Processor — Remote System Update.
2022.09.26 22.3 22.3.0
  • Updated Configure Nios V Processor Parameters
    • Edited Debug Tab
    • Added Use Reset Request Tab
    • Edited Vectors Tab. Removed Exception Agent and Exception Offset
  • Updated the following figures:
    • Nios V/m Processor IP instance in Platform Designer
    • Example connection of Nios V processor with other peripherals in Platform Designer
    • hal.linker Settings for QSPI Flash
    • Connections for Nios V Processor Project
    • hal.linker Settings
    • Linker Region Settings
    • hal.make Settings
    • BSP Driver tab
  • Added Enable Reset from Debug Module to the following figures:
    • Parameter Editor Settings
    • Nios V Parameter Editor Settings
  • Removed the mention of exception vector, exception RAM, exception agent, and .exception in the following topics:
    • Defining System Component Design
    • Nios V Processor Design, Configuration and Boot Flow (Control Block-based Device)
    • Reset Agent Settings for Nios V Processor Execute-In-Place Method
    • Reset Agent Settings for Nios V Processor Boot-copier Method
    • Nios V Processor Design, Configuration and Boot Flow (SDM-based Devices)
    • Nios V Processor Application Copied from Configuration QSPI Flash to RAM Using Boot Copier (SDM Bootloader)
    • Table: Description of Memory Organization
    • Design, Configuration and Booting Flow in Nios V Processor Application Executes in-place from OCRAM
    • Table: Summary of Nios V Processor Vector Configurations and BSP Settings
  • Edited Configuring BSP Editor and Generating the BSP Project in Nios V Processor Design, Configuration and Boot Flow (Control Block-based Device).
  • Added Table: Settings for BSP Editor in Software Design Flow (SDM Bootloader Project).
2022.08.12 22.2 21.3.0
  • Edited the steps in Programming Nios V/m into the FPGA Device.
  • Edited Table: Debug Tab Parameter to add the description for dbg_reset.
  • Edited topic On-Chip Memory Configuration - RAM or ROM topic. Added a link to Nios V Processor Application Execute-In-Place from OCRAM.
  • Changed the topic title from Clocks and Resets to Clocks and Resets Best Practices.
  • Added the following new topics:
    • Reset Request Interface
    • Typical Use Cases
    • Assigning a Default Agent
  • Added a note about configuring the RISC-V toolchain prefix in the topic Eclipse CDT for Embedded C/C++ Developer.
2022.06.21 22.2 21.3.0
  • Added the support for RiscFree* IDE for Intel FPGAs.
  • Removed the following topics:
    • Setting Up Open-Source Tools
    • Building the Application Project using Eclipse Embedded CDT
    • Building the Application Project using the Command-Line Interface
    • Creating a Software Project using Platform Designer & Eclipse Embedded CDT
    • Creating a Software Project Using Command Line
  • Edited the Figure : Software Design Flow to include RiscFree* IDE for Intel FPGAs
  • Added the following topics:
    • Nios V Software Development Flow
    • Board Support Package Project
    • Application Project
    • Intel FPGA Embedded Development Tools
    • Nios V Board Support Package Editor
    • RiscFree* IDE for Intel FPGA
    • Eclipse* CDT for Embedded C/C++ Developer
    • Nios V Utilities Tools
    • File Format Conversion Tools
    • Other Utilities Tools
    • Generating the Board Support Package
    • Generating the Application Project File
    • Building the Application Project
2022.04.04 22.1 21.2.0 Initial release.