Stratix® 10 High-Speed LVDS I/O User Guide

ID 683792
Date 7/08/2024
Public
Document Table of Contents

4.2.4.1. Aligning Word Boundaries

After initializing the LVDS SERDES IP in DPA or non-DPA mode, perform these steps to align the word boundaries.
  1. Assert the rx_bitslip_reset port for at least one parallel clock cycle, and then deassert the rx_bitslip_reset port.
  2. Begin word alignment by applying pulses as required to the rx_bitslip_ctrl port.

After the word boundaries are established on each channel, the interface is ready for operation.