Visible to Intel only — GUID: sam1412833667441
Ixiasoft
1. Stratix® 10 High-Speed LVDS I/O Overview
2. Stratix® 10 High-Speed LVDS I/O Architecture and Features
3. Stratix 10 High-Speed LVDS I/O Design Considerations
4. Stratix® 10 High-Speed LVDS I/O Implementation Guides
5. LVDS SERDES Intel® FPGA IP References
6. Stratix® 10 High-Speed LVDS I/O User Guide Archives
7. Document Revision History for the Stratix® 10 High-Speed LVDS I/O User Guide
3.1. PLLs and Clocking for Stratix® 10 Devices
3.2. Source-Synchronous Timing Budget
3.3. Guideline: LVDS SERDES IP Core Instantiation
3.4. Guideline: LVDS SERDES Pin Pairs for Soft-CDR Mode
3.5. Guideline: LVDS Transmitters and Receivers in the Same I/O Bank
3.6. Guideline: LVDS SERDES Limitation for Stratix® 10 GX 400, SX 400, and TX 400
3.1.1. Clocking Differential Transmitters
3.1.2. Clocking Differential Receivers
3.1.3. Guideline: LVDS Reference Clock Source
3.1.4. Guideline: Use PLLs in Integer PLL Mode for LVDS
3.1.5. Guideline: Use High-Speed Clock from PLL to Clock LVDS SERDES Only
3.1.6. Guideline: Pin Placement for Differential Channels
3.1.7. LVDS Interface with External PLL Mode
Visible to Intel only — GUID: sam1412833667441
Ixiasoft
4.3.3. Timing Analysis for the External PLL Mode
If you enable the Use external PLL parameter in the PLL Settings tab, the IP generation does not create clock settings for the PLL input and output. You must ensure the PLL clock settings are correct.
The Quartus® Prime software derives some of the SERDES constraints from the PLL clocks. Therefore, the Quartus® Prime software must generate the external PLL clock settings before the LVDS SERDES IP clock settings. In the .qsf of your project, ensure that the line for the .ip file of the IOPLL IP appears before the line for the .ip file of the LVDS SERDES IP.
Related Information