Visible to Intel only — GUID: sam1403482466414
Ixiasoft
1. Stratix® 10 High-Speed LVDS I/O Overview
2. Stratix® 10 High-Speed LVDS I/O Architecture and Features
3. Stratix 10 High-Speed LVDS I/O Design Considerations
4. Stratix® 10 High-Speed LVDS I/O Implementation Guides
5. LVDS SERDES Intel® FPGA IP References
6. Stratix® 10 High-Speed LVDS I/O User Guide Archives
7. Document Revision History for the Stratix® 10 High-Speed LVDS I/O User Guide
3.1. PLLs and Clocking for Stratix® 10 Devices
3.2. Source-Synchronous Timing Budget
3.3. Guideline: LVDS SERDES IP Core Instantiation
3.4. Guideline: LVDS SERDES Pin Pairs for Soft-CDR Mode
3.5. Guideline: LVDS Transmitters and Receivers in the Same I/O Bank
3.6. Guideline: LVDS SERDES Limitation for Stratix® 10 GX 400, SX 400, and TX 400
3.1.1. Clocking Differential Transmitters
3.1.2. Clocking Differential Receivers
3.1.3. Guideline: LVDS Reference Clock Source
3.1.4. Guideline: Use PLLs in Integer PLL Mode for LVDS
3.1.5. Guideline: Use High-Speed Clock from PLL to Clock LVDS SERDES Only
3.1.6. Guideline: Pin Placement for Differential Channels
3.1.7. LVDS Interface with External PLL Mode
Visible to Intel only — GUID: sam1403482466414
Ixiasoft
3.1.5. Guideline: Use High-Speed Clock from PLL to Clock LVDS SERDES Only
The high-speed clock generated from the PLL is intended to clock the LVDS SERDES circuitry only. Do not use the high-speed clock to drive other logic because the allowed frequency to drive the core logic is restricted by the PLL FOUT specification.
For more information about the FOUT specification, refer to the device datasheet.
Related Information